What tool do you need to remove a tub drain?

What tool do you need to remove a tub drain?

If your drain doesn’t have crossbars, you’ll need to use a tool called a tub drain extractor. It has a conical shape and helical knurls that grip the metal wall on the inside of the drain fitting. You turn the extractor with an adjustable wrench.

How do I use a drive socket set?

Attach the socket to the head of the wrench – you should hear a click when its properly in place. Select the direction using the flip switch to decide between loosening and tightening. Place the socket on the nut. Twist it back in the opposite direction and repeat until the bolt is fully loosened or tightened.

How do I adjust a socket wrench to loosen it?

To fasten, socket must turn clockwise. To loosen, socket must turn counter clockwise. For how to use a ratchet on newer wrenches, use the directional change feature to tighten or loosen.

What does PO Plug mean?

Re: p.o. plug. Author: rudythplbr45. Pull- out plug,usually on a chain attached to the faucet spout.

How do you unscrew an old bathtub drain?

Set the drain to its open position. Unscrew the knob on the top of the drain stopper to see if there is a set-screw underneath. If your drain stopper has a set-screw, use a small screwdriver or a hex key to unscrew it. Twist the entire stopper counterclockwise until it pulls free from its mounting post.

How do you use a drain remover?

Drain cleaners are caustic and can cause harm to skin, eyes, and mucous membranes….Use liquid drain cleaners like this:

1. Open the bottle while grasping the handle. Do not splash or squeeze.
2. Pour the specified amount into the drain.
3. Allow up to 30 minutes for the clog to clear.
4. Flush with plenty of hot water.

How do I know what socket to use?

How to Determine the Right Size Socket for a Nut

1. Turn on the digital caliper and set it to read in inches, not millimeters.
2. Close the caliper jaws until each jaw rests on one flat side of the nut on opposite sides.
3. Check the caliper display.
4. Turn on the digital caliper and set it to read in millimeters, not inches.

What do you use pop up plug wrench for?

The Pop-up Plug Wrench is used to grip plugs and drain strainers to prevent rotation during installation and repair of vanity pop-up plugs and tub drains. The dual-sided design fits the majority of pop-up plugs and drains. The long arm on each side enables more powerful turns.

What kind of wrench do you use to open drain pipe?

Used to remove pop-up or pop-out (PO) plugs from the drain opening in the basin. Also called expanding jawed pliers. Larger sizes can be used as a quick opening pipe wrench.

What kind of wrench do you use to seal a faucet?

The Internal type holds the sink strainer basket in place while you tighten the locknut below. It can also remove or install closet spuds, pop-up plugs, and strainers. Also known as a faucet seal tool or faucet seat wrench.

What kind of wrench do I need for kitchen sink?

A generic name for many types of wrenches that have large, flat-sided jaws. Good for general purpose plumbing use. The Adjustable type is an all-purpose model with notched jaws ideal for various sizes of nuts. It is the handiest and most common. The Fixed type works with large spud nuts under kitchen sinks.