What to do if your PT Cruiser Jerks?
What to do if your PT Cruiser Jerks?
Purchased OEM parts from Amazon and Chrysler to replace the Cam Sensor and Cam Magnet. Install the cam magnet, put dielectric grease on all the plug in connections, push down all the fuses in the fuse box and put the unit back together. Make sure to remove the positive battery cable before you start, this will also reset the computer.
Why does my 2004 PT Cruiser keep stalling?
My Wifes 2004 pt cruiser began bucking and stalling, I took it to the shop ,they plug it into their computer and tell me the AC cooling fan itself was burned out causing the car to overheat and stall. So we replaced it and the car still does the same thing.
What to do if your PT Cruiser dies?
My battery died on my 2005 PT CRUISER and once I charged it I got a code P0340. Purchased OEM parts from Amazon and Chrysler to replace the Cam Sensor and Cam Magnet. Install the cam magnet, put dielectric grease on all the plug in connections, push down all the fuses in the fuse box and put the unit back together.
Can a bad sensor cause a PT Cruiser to spark?
Sensors go bad but it boils down to spark in the end result unless there is internal engine damage like a broken valve train component or something worse and likely catastrophic. 12 people found this helpful. Just a side note, even with the more modern vehicles it is still a good idea to check for weak vacuum lines.
What causes engine light to come on on PT Cruiser?
11 people found this helpful. my 2007 pt did same thing, engine light came on , car was jerking and bucking, ( had nothing to do with the a/c or heat) it was the cam positon sensor, on line the part is 35.99 to 55.99 depending on where you buy it, local garage did mine part and labor for 162.00 29 people found this helpful.
Where is the engine code on a PT Cruiser?
When I restarted the engine, the codes were gone and the engine ran like it suppose to. When the cam sensor came I installed it anyway and now the car drives fine. If you turn the key on and off three time in a row, your engine code will be displayed where the odometer is located. No need to go to a shop! 19 people found this helpful.
Purchased OEM parts from Amazon and Chrysler to replace the Cam Sensor and Cam Magnet. Install the cam magnet, put dielectric grease on all the plug in connections, push down all the fuses in the fuse box and put the unit back together. Make sure to remove the positive battery cable before you start, this will also reset the computer.
11 people found this helpful. my 2007 pt did same thing, engine light came on , car was jerking and bucking, ( had nothing to do with the a/c or heat) it was the cam positon sensor, on line the part is 35.99 to 55.99 depending on where you buy it, local garage did mine part and labor for 162.00 29 people found this helpful.
When I restarted the engine, the codes were gone and the engine ran like it suppose to. When the cam sensor came I installed it anyway and now the car drives fine. If you turn the key on and off three time in a row, your engine code will be displayed where the odometer is located. No need to go to a shop! 19 people found this helpful.
My Wifes 2004 pt cruiser began bucking and stalling, I took it to the shop ,they plug it into their computer and tell me the AC cooling fan itself was burned out causing the car to overheat and stall. So we replaced it and the car still does the same thing.
Is the 2007 Chrysler PT Cruiser undercoated?
I bought a new 2007 PT Cruiser and had it undercoated. Now it is rusting out on both fenders. I don’t think that should be happening this quick. Top 157 Chrysler PT Cruiser Reviews Trending Car Warranties Home Warranties Medical Alert Systems Invisible Braces Gold IRA Movers Buyers Guides News Login Write a review Follow us:
Where can I get a motor mount for my PT Cruiser?
Inspired by classic automobile styling, your Chrysler PT Cruiser is sure to become a classic in its own right one day. Treat it well and ensure that it performs well for the long haul by getting a new Chrysler PT Cruiser motor mount from AutoZone.
What makes a PT Cruiser feel like a jeep?
Shocks or struts, ball joints, tie rods, wheel bearings, alignment, steering linkage (includes rack and pinion), power steering (pumps and hoses, leaks), wheel balance, springs or torsion bars, bushings, electronic or air suspension. “This car feels like I’m driving a Jeep in Afghanistan.
Are there any problems with the PT Cruiser?
Hi, I bought my 2002 Chrysler PT Cruiser used in Oct of 2006 with about 75,000 miles on it. I had no problems with it up until this past week. My fiance drove it to work and he said it drove fine, on the way home,he said he had the cruise control set at 55 mph, and he said all of a sudden,it started losing speed and downshifting.
What makes transmission noise in Chrysler PT Cruiser?
Stopping the passage side wheel by hand the noise stopped.I removed the wheel, brakes and rotor it still has the noise. It sounds like it’s coming from the transmission metal to metal at a high point.The transmission works fine. Help Bill
Why is my PT Cruiser not shifting gears?
1. the trans has an internal pressure leak on the 2nd gear circuit, 2. there is a problem with the solenoid block or 3. A crappy computer or crappy computer inputs. Anyway, still give it a few miles for the computer to try and smooth it out ..k, then go from there 01 Pt , will not shift out of low gear and speedo doesn’t work.
Sensors go bad but it boils down to spark in the end result unless there is internal engine damage like a broken valve train component or something worse and likely catastrophic. 12 people found this helpful. Just a side note, even with the more modern vehicles it is still a good idea to check for weak vacuum lines.
When do power steering hoses start to crack?
After several years of use, you will find that some of the hoses associated with the power steering system can start to become hard and cracked. The only way to realize this before you start to have a leak is with a periodic inspection of the hoses and other components in your car’s engine compartment. 4. Hose is Worn
What to do if your steering rack is failing?
Don’t hit the dealership for a $1,200 fix; just follow along as we show you quick and easy ways to diagnose steering rack problems. The rack and pinion steering system is what translates left-right steering wheel movement into the left-right movement of the tires to make a vehicle turn.
What are the signs of a power steering problem?
This problem has a few different signs that will help you diagnose it pretty quickly. Besides the telltale appearance of fluid on the driver’s side of the vehicle, you will also notice a grinding noise when you turn the wheel. When you hear the sound you are getting to the point where the fluid is very low and it must be fixed quickly.
Where does the power come from in a steering rack?
The “power” part of the steering comes in the form of pressurized fluid in steering rack passages that assist the driver in turning the wheels. The fluid also keeps everything cool and prevents damage in the metal-on-metal gear contact.
