What to do if your ignition coil has worn out?
What to do if your ignition coil has worn out?
As stated by others, most mechanics simply mark the distributor and rotor orientation and reinstall the distributor according to the marks they made. This works just fine. Also, the coil could care less about any of this. Worn secondary ignition parts is what usually kills ignition coils, and it sounds like you just replaced those.
Can you replace the distributor cap and rotor?
To replace the distributor itself, yes, but not just the cap and rotor. Triedaq July 6, 2016, 2:41am #3 The distributor cap and rotor can only fit one way onto the distributor. If the distributor remained in the engine, there is no problem.
What happens when you replace the coil wire on an engine?
You can replace the secondary coil wire on an engine that uses one with an equal length of vacuum hose and the engine will start and run. The powerful spark will travel down the hollow hose to the distributor cap, but the engine will stall under any load because of the weakened spark.
Why does my ignition coil have no spark?
However, after I installed the new coil I was still getting no spark. I read up on it and multiple people told me that this is likely due to the contact breaker not being able to break the circuit which causes the high voltage output from the coil.
Can a bad distributor rotor cause an engine misfire?
Engine misfires can occur for a number of reasons. Checking your distributor rotor and cap to see if they need to be replaced is one way to ensure that everything is in solid working order.
What happens when the distributor rotor and cap fail?
Excessive or unusual engine noises Your vehicle may make some very strange noises if the distributor rotor and cap are malfunctioning – specifically because the cylinders will try to fire but fail. You might hear a tapping, clicking, or sputtering sound when the distributor rotor and cap are failing.
How does the rotor work in an engine?
The rotor routes the energy in a specific through the spark plug wires ultimately to the engine’s cylinders in the correct firing order.
