Other

What to do if power sliding door does not work?

What to do if power sliding door does not work?

Pull the fuse for the power sliding door system and wait 10 seconds before reinstalling it. Once the fuse is reinstalled, perform Steps 1 through 5. After that, if the doors still do not operate correctly, you will need to take the Freestar to your local Ford dealer or qualified repair shop for diagnosis and repair.

Is there a problem with my Chevrolet Uplander sliding door?

This week alone, we have received several calls on the 1 800 LEMON LAW hotline from distressed Chevrolet Uplander drivers who are experiencing difficulties with their sliding doors. This is an issue we have routinely handled throughout the last few years. In fact, the Pittsburgh NBC affiliate reported on one of our clients back in 2007.

How to turn off power sliding door on Honda Odyssey?

Move the power sliding door switch to “Off,” then move it back to “On.” This switch is located to the left of the steering wheel. It’s labeled “Main.” Press and hold both power sliding door buttons until the doors close completely. If this does not work, turn the “Main” switch to “Off” and manually close the doors.

How to normalize front window on Chevy Cruze?

After 5 seconds pull the switch to raise the glass and continue to hold the switch for at least 5 seconds after the glass had fully closed. The window will now be normalized. The scan tool procedure is needed anytime the motor, regulator or glass is replaced.

Why is my power sliding door not working?

The passenger side power sliding door keeps opening and closing and will not stop, there is no manual operation for this door. It worked briefly after buying, (bought used about 2 years ago). With the on/off switch disabled, the door finally closed but not completely, the dashboard light states door open.

How does the power sliding door clutch work?

The PSDM supplies the power and ground to operate the power sliding door (PSD) motor and clutch. The direction of the motor rotation is determined by which of the motor control circuits is supplied 12 volts and which is grounded.

How does the power sliding door work on a Saturn?

The door is controlled by the” power sliding door module (PSDM) monitors the door position at all times including during manual operation. The PSDM supplies the power and ground to operate the power sliding door (PSD) motor and clutch.

Where are the fuses on a power sliding door?

Open the passenger front door, and you’ll see the panel at the top of the dash. Remove the panel (there’s a clip on the bottom), and you’ll find a diagram inside the panel of the fuse locations. I removed 21 (PSD) as well as 24 and 25 (LH PSD and RH PSD). No more dinging.

Author Image
Ruth Doyle