What size speakers are in a 2007 Pontiac g5?
What size speakers are in a 2007 Pontiac g5?
Speakers that fit your 2007 Pontiac G5*
| Speaker location | Speaker sizes** |
|---|---|
| Front Door | 6-3/4″ |
| Front Door Tweeters | Tweeter |
| Front Door Woofers | 6-3/4″ |
| Rear Deck Corners | 6×9″ |
How long does it take to remove door panel on Chevy Cobalt?
Removing the door panel of a Chevy Cobalt is something that needs to be done before you can make repairs to the inside of the door or aftermarket modifications to the panel itself. The actual removal can be performed by someone with very little automotive repair experience, and, with a little planning, should take no more than an hour to complete.
How do you remove the rearview mirror on a cobalt?
There is also a series of clips all around the door panel, which can be removed by using the flathead screwdriver to pry off the door section by section or by using the door panel tool. Some year models of the Cobalt have a small plastic piece (connected to the mechanism that adjusts the rearview mirrors) which will need to be pried off as well.
What kind of screwdriver do I need to remove cobalt door panel?
A flathead screwdriver is also needed to pry the panel off of the door as well as release the clips that hold the door into place. By obtaining some duct tape and putting it around the tip of the flathead screwdriver, you can greatly reduce the chance of damaging the hard plastic of the Cobalt’s door panel.
Can you use a flathead screwdriver on a Chevy Cobalt?
While it is not necessary to purchase a door panel tool for this job, it may be a good idea, as the clips on the Chevy Cobalt are of fairly low quality and can break easily when using a flathead screwdriver to pry them off.
Can you remove the door panel from a Chevy Cobalt?
Removing the door panel from you Chevy Cobalt is best done while the door is open. The cover of the door handle, as well as the cover on the inside of the armrest, will need to be pried off in order to expose the screws inside. There are three screws on the inside in total that must be removed.
There is also a series of clips all around the door panel, which can be removed by using the flathead screwdriver to pry off the door section by section or by using the door panel tool. Some year models of the Cobalt have a small plastic piece (connected to the mechanism that adjusts the rearview mirrors) which will need to be pried off as well.
What’s the best way to remove a door panel?
If you choose to remove the door panel with a flathead screwdriver, start with the top right corner and work your way around the door clockwise. This will ensure that every clip is opened allowing the door panel to be easily removed.
While it is not necessary to purchase a door panel tool for this job, it may be a good idea, as the clips on the Chevy Cobalt are of fairly low quality and can break easily when using a flathead screwdriver to pry them off.
