What should the fuel pressure be on a GM 93 Blazer?
What should the fuel pressure be on a GM 93 Blazer?
This is the procedure for checking for an internal fuel leak on your 1st gen GM 4.3V6 with the CPI engine in it. This is my 93 Blazer in the test. Fuel Pressure should be 58-62 psi, and it should hold that pressure, and hold it when turned off as well. I have a leak inside my upper intake as I show you in the video.
What should the fuel pressure be on a 4.3L V8?
This is where you’ll connect your fuel pressure gauge (the first photo, in the image viewer, is of a 4.3L, and the second of the V8 engine). NOTE: In case you’re wondering, the factory manual specifies that the fuel pressure for the CSFI system should be between 56-62 PSI.
Can a bad fuel pressure regulator cause a misfire?
There are also many causes of engine misfires. It can be a problem in the spark plug or the ignition coil. A fuel injector problem can also cause engine misfires. It is also one of the symptoms of a bad fuel pressure regulator. A problem with this device can lead to low fuel pressure.
How to check for fuel leaks in a GM 4.3L?
Once the fuel pressure gauge registers pressure, check for fuel leaks around the Schrader valve. It’s very important that NO fuel leaks are present for the accuracy of the test. Once you have verified no fuel leaks, continue to the next step. Have your assistant crank the engine as you eyeball the fuel pressure gauge.
How to check no fuel condition on GM 4.3L?
I’ve also included how to check a no fuel condition with starting fluid (although this is not the most effective way to test the fuel pump). It’s been my experience that misdiagnosing a bad fuel pump is a common occurrence on the 4.3L, 5.0L, 5.7L GM vehicles with the ‘Spider’ fuel injector assembly.
What should fuel pressure be on GM 4.3L Vortec?
You can find this tutorial in Spanish here: Cómo Probar La Bomba de Combustible (GM 4.3L, 5.0L, 5.7L) (at: autotecnico-online.com ). The fuel system in your 4.3L, 5.0L, or 5.7L Vortec engine needs at least 50 PSI of fuel pressure to start.
What does 0 psi mean on fuel gauge?
CASE 2: The fuel pressure gauge’s needle DID drop down to 0 PSI immediately after the Key was turned to the Off position: This tells you that there is something leaking inside the plenum. More than likely, it’ll be the fuel pressure regulator, to make sure go to: TEST 2.
What should the fuel pressure be on a GM 4.3L?
This is where you’ll connect your fuel pressure gauge (the first photo, in the image viewer, is of a 4.3L, and the second of the V8 engine). NOTE: In case you’re wondering, the factory manual specifies that the fuel pressure for the CSFI system should be between 56-62 PSI. The CPI system’s fuel pressure should be between 60-66 PSI.
CASE 2: The fuel pressure gauge’s needle DID drop down to 0 PSI immediately after the Key was turned to the Off position: This tells you that there is something leaking inside the plenum. More than likely, it’ll be the fuel pressure regulator, to make sure go to: TEST 2.
Once the fuel pressure gauge registers pressure, check for fuel leaks around the Schrader valve. It’s very important that NO fuel leaks are present for the accuracy of the test. Once you have verified no fuel leaks, continue to the next step. Have your assistant crank the engine as you eyeball the fuel pressure gauge.
How can I check the pressure of my fuel pump?
There are two ways to tap into the fuel line to see how much pressure the fuel pump in producing. One method involves removing the fuel filter and using an adapter, that has a Schrader valve on it, in its place. You then connect your fuel pressure test gauge to this adapter.