What kind of engine does a Dodge Ram SRT 10 have?
What kind of engine does a Dodge Ram SRT 10 have?
Dodge Ram SRT-10 engine (with aftermarket intake tube) The SRT-10 featured a Chrysler 8.3 liter V10 that was first used in the third generation Viper. This engine produced 500 bhp (373 kW; 507 PS) at 5,600 rpm and 525 lb⋅ft (712 N⋅m) of torque at 4,200 rpm.
Which is the hot wire on a car radio?
Car radios are designed to have a single ground wire and two power wires. One power wire is hot all the time, and the other only has power when the engine is running, or when the ignition switch is in the accessory position.
What kind of brakes does a Dodge SRT 10 have?
The standard ABS-equipped brakes were fitted with 15 in (381 mm) rotors in front and 14 in (356 mm) rotors out back. 2004 models used red-painted two-piston sliding brake calipers front and rear; these were replaced with larger four-piston monoblock calipers up front in 2005–06, designed by TRW and unique to the SRT-10.
Is it possible for a car radio to fail?
While it is possible for a car radio to fail altogether, there are a lot of internal and external issues that can be fixed well short of total replacement. Some of the most common issues include a blown fuse, bad or damaged wiring, and anti-theft modes that are often triggered when the battery dies.
How to troubleshoot poor or no AM or FM radio reception on your car?
How to troubleshoot poor or no AM or FM radio reception on the car stereo. IMPORTANT: It is recommended that all car stereo installations be performed by a qualified, professional installer. NOTE: If model-specific information is needed to complete any of these steps, refer to the instructions supplied with the product.
How many speakers does the Dodge infinity have?
The Infinity system includes a CD/cassette receiver or a CD receiver in the dash, and a complement of 7 speakers: 3-1/2″ speakers in the dash (left, right), a 2-1/2″ center dash speaker, two 6″x9″ woofers in the front doors, and two 5-1/4″ speakers in the rear doors.
What to do if your car stereo is not working?
Try resetting the car stereo. There could also be a poor ground connection. We would recommend that you contact your local installer to have the ground connection checked. If the issue is still unresolved, service may be required. Go to Product Repair. Get Support Content on the Go!
Who is the best person to install a car stereo?
IMPORTANT: It is recommended that all car stereo installations be performed by a qualified, professional installer. NOTE: If model-specific information is needed to complete any of these steps, refer to the instructions supplied with the product. Manuals are posted on your model support page.
