What kind of ABS does a 1993 K-1500 have?
What kind of ABS does a 1993 K-1500 have?
I have a 1993 K-1500, so if you have ABS I’d check that, the only thing is that black box ain’t cheap so the mechanic just unhooked and heck the brakes work fine. The mechanic told me that it was only front ABS anyways so I really didn’t need to replace that box.
What is dump valve on Chevy C / K 1500?
The dump valve is the alluminum block with two soliniods on it mounted below the brack module and has a 4 pin connecter going into the brake module, and two brake lines. Remove the grey or black 4 pin connector and check the ohms across pins D to A 3-6 ohms and pins D to B 1-3 ohms measured from the harness end.
What are the brake codes for a Chevy truck?
Discussion in ‘ Suspension & Brakes ‘ started by davbell22602, Apr 9, 2010 . Here’s information on pulling Chevy Truck OBDI Brakes codes for the RWAL and AWAL brake systems and codes.
How to bleed the ABS on a C / K 1500?
Wait one minute for the tool to energize and cycle the ABS solenoids. Bleed each wheel as the scan tool instructs you to. The pump will run and the release valve on each wheel will cycle for one minute. Afterward, the scan tool purges any extra air with one last 20 second cycling of the solenoids.
What kind of brake system does a Chevy c1500 have?
This is a known issue on Chevy C1500 pickup trucks equipped with rear-wheel anti-lock (RWAL) brake systems. There is a small black module near the master cylinder that serves as the brain for this system, and there are ways to check for diagnostic trouble codes. Once a code is revealed, diagnosis can be fairly simple.
I have a 1993 K-1500, so if you have ABS I’d check that, the only thing is that black box ain’t cheap so the mechanic just unhooked and heck the brakes work fine. The mechanic told me that it was only front ABS anyways so I really didn’t need to replace that box.
The dump valve is the alluminum block with two soliniods on it mounted below the brack module and has a 4 pin connecter going into the brake module, and two brake lines. Remove the grey or black 4 pin connector and check the ohms across pins D to A 3-6 ohms and pins D to B 1-3 ohms measured from the harness end.
Discussion in ‘ Suspension & Brakes ‘ started by davbell22602, Apr 9, 2010 . Here’s information on pulling Chevy Truck OBDI Brakes codes for the RWAL and AWAL brake systems and codes.
