What is the fault code for the Allison Transmission 3000?

Allison Transmission 3000/4000 series fault code list Allison Transmission 3000/4000 series fault code list Allison Transmission PDF Service Manuals Automatic transmissions Allison 3000 and 4000 Series with electronic control Gen4 Error code Description Lamp Check Trans

What are the specs of an Allison 1000?

Allison 1000 Specs Name: Allison 1000 Weight: ~ 330 lbs dry Max Input RPM: 3,300 rpm (2015 MY spec) Nom. Max Input Torque: • 520 lb-ft (01 – 05 MY) • 565 lb-ft (05 ATF: Dexron-III (5 spd models) or Dexron-VI A

When did GM stop using the Allison Transmission?

GM sold Allison Transmission in 2007, although Duramax powered pickups continue to use their transmissions. Moderate changes have occurred to the transmission throughout the years however the platform itself has, for all intents and purposes, remained the same since 2001.

What are the weaknesses of the Allison Transmission?

This allows for low engine speeds at cruising rpm and ultimately opportunities for significantly reduced fuel consumption in relative terms. The Allison is not without a few weaknesses, which include insufficient lubrication to the C3 clutch and the off-center engagement of the C1 and C2 clutches.

Is the Allison 1000 a manual or automatic transmission?

General Motors was the first of the “Big 3” to phase out a manual transmission option for their diesel – the ZF 6 speed was last offered for the 2006 model year. Modern automatic transmissions, such as the Allison 1000, are far superior to manual transmissions in almost every category.

Are there any weaknesses in the Allison 1000?

The Allison is not without a few weaknesses, which include insufficient lubrication to the C3 clutch and the off-center engagement of the C1 and C2 clutches.

How to know if your Allison code is C eared?

Shift selectors with a single digit display will flash the LED indicator three times after about three seconds and three times again after about ten seconds indicating that all of the codes are c eared. 2 DRIVE THE VEHICLE AND CHECK FOR CODE REOCCURRENCE.

What’s the off button on an Allison Transmission?

Off. Off. Off. Off. Sample control at excess temperature. Holds 4 transfer. Torque converter lock ban. Disables adaptation gear. Off. Prohibition on blocking the torque converter. DNA ON. ON.

How does the code list work on Allison?

Each item is displayed for about one second. The display cycles continuously until the next code list position is selected by pressing the MODE button. THE FOLLOWING LIST REPRESENTS A CODE DISPLAY USING CODE 25 11 AS AN EXAMPLE: Code list position d 1 (will be displayed one digit at a time on a shift selector with a single digit display).

Are there any problems with the Mercedes MBE 4000?

I have a 2005 Freightliner Columbia with Mercedes MBE 4000 engine. This truck has been nothing but problems from day one. At 290K the coolant started to leak from head gaskets, so the dealer replaced liners, pistons and head gaskets under warranty.

What is the code for the Allison Transmission?

ALLISON AT Code (DTC) P1769 AG4 Transmission Torque Modulation Fault ALLISON AT Code (DTC) P1770 Clutch Solenoid Circuit Malfunction ALLISON AT Code (DTC) P1775 Transmission System MIL Fault

What is Allison at Code ( DTC ) p0604?

ALLISON AT Code (DTC) P0603 Internal Control Module Keep Alive Memory (KAM) Error. ALLISON AT Code (DTC) P0604 Internal Control Module RAM Error. ALLISON AT Code (DTC) P0605 Internal Control Module ROM Error (Module Identification Defined by SAE J1979) ALLISON AT Code (DTC) P0606 PCM Processor Fault.

Are there any fault codes for Mercedes Benz?

This is the complete list of Mercedes Benz fault codes. If you are working on a Mercedes-Benz engine and need more information we have factory printed manuals available at the links below:

What does the Allison Transmission Control package do?

The Allison electronic controls package oversees the operation of the transmission, controlling transmission upshifts and downshifts, and providing important information on the operation of your drive system. Through readouts on your shift selector, you will be able to monitor transmission oil levels and read diagnostic codes.

What do the codes on the Allison code mean?

(8, 7, 6, 5, 4, 3, 2, 1) NOTE: Failure to meet any of the above conditions will stop the two- minute countdown. The shift selector will display one of the following oil level codes to show the reason for the countdown interruption. The countdown will resume where it stopped once all conditions have been met.

When did the Allison Generation 3 come out?

In1998, the Allison Generation 3 replaced the original WTEC II transmission controls. Theis generation ushered in the computer-based diagnostic era, which meant you could use a variety of diagnostic tools to connect to the Allison Transmissions to read codes, clear codes, perform diagnostic commands, and more. Other differences:

What was the purpose of the Allison Transmission?

Theis generation ushered in the computer-based diagnostic era, which meant you could use a variety of diagnostic tools to connect to the Allison Transmissions to read codes, clear codes, perform diagnostic commands, and more. Other differences: The controls for the Allison Transmission were updated, offering several different styles.

How does the Allison oil level code work?

The shift selector will display one of the following oil level codes to show the reason for the countdown interruption. The countdown will resume where it stopped once all conditions have been met. Shift selectors with single digit displays will display the four digit codes one digit at a time.

What’s the horsepower of the Allison 3000 series?

The 3000 Series includes close or wide ratio gearing and a maximum rating of 336 kW (450 hp). The addition of 5th Generation advanced electronic controls enhance operation and prognostics capabilities. An optional integral output retarder for better vehicle braking and reduced brake wear is also offered.

Can a tool not be used by Allison Transmission?

Accordingly, ANYONE WHO USES A SERVICE PROCEDURE OR TOOL WHICH IS NOT RECOMMENDED BY ALLISON TRANSMISSION OR THE VEHICLE MANUFACTURER MUST ﬁrst be thoroughly satisﬁed that neither personal safety nor equipment safety will be jeopardized by the service methods selected.

What’s the maximum horsepower of an Allison Transmission?

Allison Transmission’s 3000 Series is designed for medium-duty commercial vehicles and is engineered to adapt and operate efficiently in a variety of applications. The 3000 Series includes close or wide ratio gearing and a maximum rating of 336 kW (450 hp).

What is the oil sensor on Allison World transmission?

It has an oil sensor option to detect transmission oil level, a feature that is now supplied automatically with the shallow oil pan option. The transmission can detect malfunctions and protects itself by illuminating a dash-mounted “DO NOT SHIFT” warning light.

What does do not shift signal mean on Allison World?

The transmission can detect malfunctions and protects itself by illuminating a dash-mounted “DO NOT SHIFT” warning light. It will then shift hydraulically to a default gear in “Convertor Mode” and release the lock-up clutch.

What is the fault code for the Allison Transmission 3000?