Other

What does the OBD code p0133 mean?

What does the OBD code p0133 mean?

What does code P0133 mean? OBD-II Code P0133 is defined as an Oxygen Sensor Circuit Slow Response (Bank 1, Sensor 1) Code P0133 is triggered when the powertrain control module or PCM determines that the oxygen sensor voltage switch from below 400 millivolts to above 450 millivolts is taking too long.

What causes the p0130 O2 sensor to malfunction?

Usually the cause of P0130 is a bad oxygen sensor, however this isn’t always the case. If your o2 sensors haven’t been replaced and they are old, it’s a good bet that the sensor is the problem. But, It could be caused by any of the following:

What to do when the freeze frame code is p0133?

When the code P0133 is set, record the freeze frame data in fine detail. Next, duplicate the code setting conditions on a test drive, paying particular attention to load, MPH, and RPM. The best tool to use on this test drive is a data streaming scan tool that has factory quality, dedicated live data.

What are the P codes for mechanical fault?

P0016 Crankshaft position/camshaft position, bank 1 sensor A -correlation Wiring, CKP sensor, CMP sensor, mechanical fault P0017 Crankshaft position/camshaft position, bank 1 sensor B -correlation Wiring, CKP sensor, CMP sensor, mechanical fault

What does code P0133 mean? OBD-II Code P0133 is defined as an Oxygen Sensor Circuit Slow Response (Bank 1, Sensor 1) Code P0133 is triggered when the powertrain control module or PCM determines that the oxygen sensor voltage switch from below 400 millivolts to above 450 millivolts is taking too long.

What is the p0130 code on an oxygen sensor?

P0130 code definition The P0130 code is associated with the bank 1, sensor 1, oxygen sensor. Your vehicle may have anywhere up to five oxygen sensors. It also may be related to other codes, such as: P0131, P0132, P0133, P0134. P0135, P0171, or P0175.

What are the causes of a p0130 gas leak?

P0130 Possible Causes 1 Faulty Front Heated Oxygen Sensor Bank 1 2 Front Heated Oxygen Sensor Bank 1 harness is open or shorted 3 Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection 4 Inappropriate fuel pressure 5 Faulty fuel injectors 6 Intake air leaks may be faulty 7 Exhaust gas leaks

When the code P0133 is set, record the freeze frame data in fine detail. Next, duplicate the code setting conditions on a test drive, paying particular attention to load, MPH, and RPM. The best tool to use on this test drive is a data streaming scan tool that has factory quality, dedicated live data.

How much does it cost to repair a car p0133?

The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. When is the P0133 code detected? The response of the voltage signal from the sensor takes more than the specified time.

How much does it cost to replace a p0133 Ford sensor?

Replacing the Front Heated Oxygen Sensor Bank 1 usually takes care of the problem. What does this mean? The cost of diagnosing the P0133 FORD code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

What is the diagnostic code for O2 sensor circuit slow?

Cost of diagnosing the P0133 code. P0133 is a diagnostic trouble code (DTC) for “O2 Sensor Circuit Slow Response (Bank 1 Sensor 1)”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.

Author Image
Ruth Doyle