What does the Lucas Transmission fix formula do?

Lucas Transmission Fix is a non-solvent formula designed to mix with your transmission fluid to stop slip, hesitation, and rough shifting in worn transmissions and eliminate seal leaks. Lucas Transmission Additive is designed to1:

What causes a transmission to slip on a Lucas?

In most cases, the transmission slips due to a clogged valve body, worn band, or bad torque converter. Lucas can be useful in freeing up any worn transmission valve body solenoids. It also has friction modifiers that are added to renew transmission bands.

When do you need to replace transmission seals in a Lucas?

To properly fix this problem, the worn-out seals need to be replaced to eliminate transmission leaks. In most cases, the transmission slips due to a clogged valve body, worn band, or bad torque converter. Lucas can be useful in freeing up any worn transmission valve body solenoids.

Can a bad transmission shift solenoid cause hard shifting?

You may also have intermittent problems with the transmission shift solenoid, which will cause shifting problems. This can cause hard shifting or shiftings at too low or too high RPM, for example.

Is there a quick fix for transmission shift solenoid?

You may also do this procedure, with the engine running in park, to flush out dirt from the solenoid. You may ground the solenoid inside the car, at the transmission connector. This test is also good for duty cycle controlled solenoids. This concludes the Transmission Shift Solenoid Quick-Fix. Loading…

Do you need to check transmission fluid before adding Lucas?

Before you add Lucas transmission additive to your transmission, it is important to check the transmission fluid level. You should not overfill the transmission with fluid. Siphon out as much automatic transmission fluid as you plan on adding from the additive. If you add half a quart of Lucas Transmission Fix]