What does the fan clutch connect to?

What does the fan clutch connect to?

The Fan Clutch is an important part of your cooling system. Its drive shaft attaches to the water pump. Then, the fan attaches to the clutch housing. The fan clutch’s job is to control when the fan comes on and off.

How does a fan clutch work on an engine?

by Allen Moore. A fan clutch is the assembly that your engine cooling fan rides on and that tells the fan when to turn on and off. A central core, which locks and unlocks based on the temperature, allows the fan to spin with the engine crankshaft or freewheel on its own.

How to attach a fan to a jeep clutch?

Use a 1/2″ socket to secure your Jeep’s fan to the new clutch and tighten the bolts to 15-18 ft. lbs. of torque. 10. Place your Jeep’s radiator fan shroud over your fan and carefully lower both into your engine compartment being careful not to make contact with the radiator. Then, re-attach your Jeep’s fan to the water pump pulley.

Are there different types of thermal fan clutches?

We manufacture four different types of thermal fan clutches: standard duty, heavy duty, severe duty and truck fan drives. Each type is engineered to simulate the performance, fit and appearance of the original equipment clutch that it replaces. All fan clutches are for specific applications and should only be applied for which they are cataloged.

How to test if your fan clutch needs to be replaced?

To test whether or not your fan clutch needs to be replaced, simply spin your Jeep’s fan by hand while the engine is cold and if it spins freely 5 rotations or more, it will need to be replaced. Fortunately, this is a very easy task to do but like any job, the right tools can make all the difference.

Is there a tool to remove a fan clutch?

Only 7 left in stock – order soon. ALPHA MOTO 2 Piece Fan Clutch Wrench Set – Nut Water Hub Removal Remove Removing Holding Holder Clutch Tool Compatible With BMW GM 318i 323i 323is 325 325ci 325e 325i 325is 328i 328is 330ci 330i 330xi .

Is there a pulley holder for a fan clutch?

Pulley Holder & Fan Clutch Tool Kit – 3472 . . Only 4 left in stock – order soon. . . . Only 10 left in stock – order soon.

How does the oil work in a fan clutch?

The latter fills with oil and has a valve that controls the flow of oil between two compartments. One acts as a holding area while the other directs to the clutch. As the valve opens, the oil enters the clutch, and this leads to the fast movement of the fan.

When to use impact chisel on fan nut?

2003.5 F350 6.0 – the wrench, instead of turning the fan nut, is spreading. It springs back to shape when you pull it off, but it’s definitely not helping me in any way. (Yes, I’m going the correct direction for removal) Guess I’m going to have to go the impact chisel route.