What does a no Bus code mean?
What does a no Bus code mean?
“No bus” is your ECM telling that one of the other computers onboard doesn’t wanna talk to the ECM. This is “usually” a wiring/connector problem. Check you wiring/connections, especially under the drivers side kick panel.
What does no Bus mean on a 2000 Dodge Dakota?
If You see a no bus error message on the instrument cluster in Your Dodge Dakota that means that Your gauge cluster has lost communication with the ECU. The ECU communicates with instrument cluster via a system that is called CAN BUS. If it is loose at all then that would lead to a loss of communication.
Where is the no bus sign on my car?
If any sensor shorts out the pcm goes dead and the no bus sign shows. On the rear drivers side top of bellhousing is the location for the crank sensor. Unplug the sensor and watch your dash. Your meters will restore and the NO BUS flag will be gone.
What does no bus mean on the odometer?
RECENTLY HAD “no buS” SHOW ON THE ODOMETER IN MY 2000 JEEP WRANGLER. THE VEHICLE DID START AND RAN WITHOUT A PROBLEM, BUT WHO KNOWS FOR HOW LONG. THE ONLY RECENT CHANGE WAS A NEW BATTERY. Having the same problem on my ’99 Jeep Cherokee.
Where is the no bus signal on the Odom?
The no bus signal on the odom. Pcm depends on an 8 volt ref to communicate through the bus line to the cluster to operate the dash and to communicate threw the aldl connecter. If any sensor shorts out the pcm goes dead and the no bus sign shows. On the rear drivers side top of bellhousing is the location for the crank sensor.
What does no bus mean on a jeep?
The reply stating that the battery was just changed makes me more suspicious that this is the cause. The no bus syndrome on the jeeps. Had one in the shop a no start with the fuel and amp gauge not working. The no bus signal on the odom.
If any sensor shorts out the pcm goes dead and the no bus sign shows. On the rear drivers side top of bellhousing is the location for the crank sensor. Unplug the sensor and watch your dash. Your meters will restore and the NO BUS flag will be gone.
RECENTLY HAD “no buS” SHOW ON THE ODOMETER IN MY 2000 JEEP WRANGLER. THE VEHICLE DID START AND RAN WITHOUT A PROBLEM, BUT WHO KNOWS FOR HOW LONG. THE ONLY RECENT CHANGE WAS A NEW BATTERY. Having the same problem on my ’99 Jeep Cherokee.
The no bus signal on the odom. Pcm depends on an 8 volt ref to communicate through the bus line to the cluster to operate the dash and to communicate threw the aldl connecter. If any sensor shorts out the pcm goes dead and the no bus sign shows. On the rear drivers side top of bellhousing is the location for the crank sensor.
Is the data bus the same as a computer?
Your cars have a “data bus” the same as a personal computer. It is basically just part of the computers wiring system. Try checking plug in connectors in your wiring system. This could possibly be somewhere besides behind the instrument cluster, such as at the computer. Another thing to check is the ground system.
