What are the trouble codes for Cummins ISX engines?

These Cummins trouble codes pertain to ISX engines built with the EGR system, but pre-DPF (2002 – 2006). 115 Engine Magnetic Speed/Position Lost Both of Two Signals – Data Erratic, Intermittent, or Incorrect 122 Intake Manifold 1 Pressure Sensor Circuit – Voltage Above Normal, or Shorted to High Source

Are there any fault codes for 2010 ISX?

They say previously active and all have one occurrence except for one of them that has 3. SPN 2633 FMI 7 has (3) occurrences and both SPN 101 FMI 2 and SPN 1209 FMI 16 have (1) fault. I never cleared them and honestly don’t know how to find out how old they are.

What does SPN 2633 FMI 7 fault code mean?

SPN 2633 FMI 7 has (3) occurrences and both SPN 101 FMI 2 and SPN 1209 FMI 16 have (1) fault. I never cleared them and honestly don’t know how to find out how old they are. What does this mean and how can I correct it??

Is the CM2350 the same as the ISL9?

This engine was also commonly called the “ISL” until 2016, when it was renamed the “L9” or “ISL9”. The CM2350 is the accumulation of all emission related technology from 2007 to current, including EGR valve, EGR cooler, DPF filter, DOC, and SCR. There 558 codes for this series engine, and our website has detailed troubleshooting on all of them.

What is the code for Cummins ISX15 CM2350?

/ ISX Related Help / Cummins ixs 15 code Got 2014 Volvo with Cummins isx15 cm2350.. purchased truck not to long ago. Truck has 475 hp tune done by dealer. But truck does pull and on slight hills it looses rmps and boost. So far replaced throttle valve and checked for boost leaks. One time got a code spn 1239 fmi 16.

What is the ISX fault code for Cummins CM871?

Here are all the Cummins ISX engine fault codes available for the Cummins CM871 ECM. These codes pertain to the ISX engines built between 2007 and 2010. These engines are easily identified by having a DPF and regen on a regular basis. These codes do NOT pertain to engines using DEF.

What’s the SPN for my Cummins ISX engine?

SPN 1209 (Engine Exhaust … read more Auto Mechanics 1&2/diesel… Bought 2005 KW on highway truck. Has cummins isx. Just Hi. Bought 2005 KW on highway truck. Has cummins isx. Just trying to find horse power for motor Thankyou Charlie … read more I am in the middle of the Yukon in northern Canada and my isx cummins engine is derated.

How to find the fault code for a Cummins Engine?

Cummins Fault Codes list for QSB, QSC, QSL9, QSM11, QSX15, QSK19, QSK23, QST30, QSK45, QSK60, QSK78 engines. To determine the malfunction, you just need to write out the fault code from the device in the cab and find the codes in the table by selecting your own engine type. Fault code (LAMP) SID, PID FMI. SPN.

What are the fault codes for Cummins trucks?

596 Electrical Charging System Voltage – Data Valid but Above Normal Operational Range – Moderately Severe Level 597 Electrical Charging System Voltage – Data Valid but Below Normal Operational Range – Moderately Severe Level 598 Electrical Charging System Voltage – Data Valid but Below Normal Operational Range – Most Severe Level

What kind of SCR does Cummins ISX cummings use?

The ventilated exhaust lowers the combustion chamber temperature. The ISX Cummings started featuring the selective catalytic reduction (SCR) system in 2006. It injects urea, which is an active element in diesel exhaust fluid (DEF), into the exhaust.

How much did it cost to clean a 2009 Cummins ISX?

They had it for three days and charged me for 10 hours of labor, $500.00 for the DPF cleaning, a couple gaskets and a clamp, about $1,800.00 out the door. I left, parked for the night and the next morning, drove 180 miles to deliver a load.

When does an ISX fault code become active?

The pressure in the intake manifold exceeded the maximum allowable value for a given engine rated power. This DTC becomes active when the pressure in the intake manifold exceeds the maximum allowable value for a given engine power rating. ISF 2.8, ISF 3.8, ISB, ISC, ISL, ISLe , ISDe , QSB 3.3

What’s the regeneration process on a Cummins ISX?

• Press “Force regeneration switch” for at least 2-7 seconds. • If Regeneration is accepted, RPM will rise until regeneration is complete. Regeneration Process Cummins Engine Note: Prior 2009 models had regeneration switch inside the cab in driver controls.

What are the diagnostic codes for Cummins ISX?

Cummins diagnostic trouble codes for ISX, ISF 2.8, ISB, ISC, ISLe, 4ISBe, 6ISBe, ISDe, ISM, QSM, QSX engine control units

What is the ISM Code for a Cummins 8600?

When coming down mountain with jake break on -thats when check engine light ca … read more HAVE A 2007 8600 INTERNATIONAL WITH A CUMMINS ISM HAS MANY FAULS, i KNOW IT NEEDS A EGR VALVE, IT WILL NOT OPEN OR CLOSE, CONECTIONS GOOD, ENGINE SN 35107608.

What is the ISM Code for a 2012 Cummins T800?

CODE 1866, PID 4, FMI 2 SPN 411 CLEANED OUT DIFF PRESSURE PORTS, … read more Getting spn0411 code ona cummins isx. 2012 KW T800. Cummins. Vocational, Technical or Tra… I having issues with an ism here. Engine #35137981. Starts Hi. I having issues with an ism here. Engine #35137981. Starts real good runs for maybe 20 seconds dies.

What are the fault codes for Cummins engines?

Cummins engines fault codes list Error code 111 Engine: ISF 2.8, ISF 3.8, ISB, QSB, QSC, ISL, QSL, ISM, QSM, ISX, QSX Error: ECM internal failure. Description: This DTC can only occur if there is a problem inside the ECM.

What is the fault code for a Cummins truck?

CUMMINS ISX Fault Codes DTC. Cummins ISX Codes 111-500. 111 Electronic Control Module Critical Internal Failure – Bad Intelligent Device or Component. 115 Engine Magnetic Speed/Position Lost Both of Two Signals – Data Erratic, Intermittent, or Incorrect.

What is the Regen code for a Cummins Engine?

These engines are easily identified by having a DPF and regen on a regular basis. These codes do NOT pertain to engines using DEF. 111 Engine Control Module Critical Internal Failure – Bad Intelligent Device or Component 115 Engine Magnetic Speed/Position Lost Both of Two Signals – Data Erratic, Intermittent, or Incorrect

What are the ISL codes for Cummins ECM?

122 Intake Manifold Pressure Sensor Circuit – Voltage Above Normal or Shorted to High Source 123 Intake Manifold Pressure Sensor Circuit – Voltage Below Normal or Shorted to Low Source 124 Intake Manifold One Pressure – Data Valid but Above Normal Operational Range – Moderately Severe Level

What do you need to troubleshoot a Cummins Engine?

There are trim codes on the injector that must be installed into the ECM for proper operation. You really need the proper Cummins troubleshooting program called INSITE. It helps with these electronic engines as well as the special tooling for troubleshooting. Without them it is a guessing game.

Can you replace an injector without Cummins Insite?

You cannot replace injectors without Cummins Insite program. There are trim codes on the injector that must be installed into the ECM for proper operation. You really need the proper Cummins troubleshooting program called INSITE. It helps with these electronic engines as well as the special tooling for troubleshooting.

What is the fault code for a Cummins forklift?

195-2wire Coolant Level Sensor 1 Circuit – Voltage Above Normal, or Shorted to High Source 195-3wire Coolant Level Sensor 1 Circuit – Voltage Above Normal, or Shorted to High Source 196-2wire Coolant Level Sensor 1 Circuit – Voltage Below Normal, or Shorted to Low Source

Where is the shutdown valve on a Cummins diesel?

The shutdown valve is the little square block with a single wire going to it on the side of the fuel manifold, above the fuel filter. It is basicially an electro-magnet solenoid that holds open a valve. When you turn off the key, the ECM kills the power to the solenoid.

What are the fault codes for Cummins oil pressure sensor?

A low signal voltage or an open circuit is detected in the oil pressure sensor circuit. The ECM determines that the oil pressure sensor signal voltage is less than 0.25 VDC for more than 16 seconds. ISF 2.8, ISF 3.8, ISB, ISC, ISL, ISLe , ISDe , QSB 3.3 A high signal voltage or an open circuit is detected in the coolant temperature sensor circuit.

Can a Cummins ISX15 crank no start no codes?

1 07-29-2019, 01:46 AM (This post was last modified: 07-31-2019, 05:35 PM by Jas00500 .) Working on a isx15 cm2350 in a pro star. Looked at it quickly few days ago did not get too far yet. Truck cranks but no start and no fault codes in insite. Check rail Pressure was OK open fuel line at rail have fuel. Check engine speed was ok.

Where is the WiF sensor on a Cummins ISX?

Hello Sawguy, the WIF sensor is located on the bottom of the fuel filter. Should be the only item on the fuel filter housing that has a wire going to it. sawguy Thanks this.

What causes a fault on a Cummins ISX?

The ECM detects that the signal inputs of the crankshaft position and camshaft position sensors are connected in reverse order. The engine speed signal from the camshaft position sensor is not detected. Possible causes for this DTC are damage to the camshaft position sensor, an open or short circuit in the circuit, or a fault in the power circuit.

How much does a Cummins ISX diesel engine cost?

2008 Cummins ISX DPF Diesel Engine, 485HP. Approx. 420K Miles. All Complete. $13,995.00 with Exchange For Information on this or any other engines. Please Call . 2006 Cummins ISX EGR Diesel Engine, 500HP. Approx. 431K Miles. All Complete. $11,995.00 with Exchange. For Information on this or any other engines. Please Call .

Can a Cummins engine be put in a truck?

I put a crate engine from Cummins ReCon at 800k miles. Yes it had a bad cam and fallower. Guy I’m leased to put a new Cummins engine in his 13 after the fuel pump took a dump and destroyed the engine at 340k miles.

Why does my Cummins ISX low boost high exhaust temps?

If you run down south for the week, truck will no due this all week come north and it will do this all the time. 35 degrees or less and it does it. Changed out Exhaust gas pressure sensor, did not fix. Any ideas? check the turbo see if the shaft rocks enough to hit the housing also check the boost sensor see if its plugging up

Where are the vanes on a Cummins ISX?

In the 2nd video, you can see the turbine housing. The vanes on the turbine wheel fit in the slots of the rotating collar in the turbine housing at the left. If those slots fill with soot, the that collar can stick as well. Everything can be cleaned, but the dealers pretty much just replace them under warranty.

Is the 2006 Cummin ISX a good truck?

Only egr problem I had with 3 ISX’S I drove in 4 years. I got lucky. I have an 06 isx in my 07 w900 it has 1.4 million on it but was inframed at 1.15 million no problems with the way it pulls or with fuel mileage 6.2 average.

What is the aftertreatment temperature of Cummins ECM?

1665 Aftertreatment Exhaust Gas Temperature 1 Circuit – Voltage Below Normal, or Shorted to Low Source 1666 Aftertreatment Exhaust Gas Temperature 1 Circuit – Voltage Above Normal, or Shorted to High Source 1667 Aftertreatment Exhaust Gas Temperature 1 – Data Erratic, Intermittent, or Incorrect

Is the 2006 Cummins ISX good or bad?

I have a 06 Cummins isx with a rebuild with 1.1 million miles have had for 2 months so far so good. I have an 06 with 1.3 million in it. It also is in an 07 379. Being that is a 500 it does not seem to be as prone to the Cam issues as the larger hp motors. Every month 400 people find a job with the help of TruckersReport. Please Select…

Is the Cummin ISX in a 07 379?

It also is in an 07 379. Being that is a 500 it does not seem to be as prone to the Cam issues as the larger hp motors. Every month 400 people find a job with the help of TruckersReport. Please Select… I Need CDL Training In CDL School Now CDL Grad, No Experience 1-5 Months 6-11 Months 1 Year 2 Years 3 Years 4 Years 5+ Years

Which is the most severe fault code for Cummins?

352 Sensor Supply 1 Circuit – Voltage Below Normal or Shorted to Low Source 386 Sensor Supply 1 Circuit – Voltage Above Normal or Shorted to High Source 415 Engine Oil Rifle Pressure – Data Valid But Below Normal Operating Range – Most Severe Level 418 Water in Fuel Indicator – Data Valid But Above Normal Operating Range – Least Severe Level

What are the International fault codes for trucks?

INTERNATIONAL Navistar Truck Fault Codes list DTC. INTERNATIONAL Trucks Fault Codes DTC. DTC Circuit Condition Description. 111 ECM No errors detected – flash code only. 112 ECM PWR Electrical system voltage B+ out-of-range high. 113 ECM PWR Electrical system voltage B+ out-of-range low. 114 ECT Engine Coolant Temperature signal out-of-range low.

What is the fault code on an Intl 9200i?

No International engines have a 197 fault code. If your truck has a Cummins engine, 197 is for low coolant level. 3HTrucking and Captredbeard Thank this. I have 4 fault codes on my 2005 Intl 9200i, ISM Cummins.

What are the fault codes for International trucks?

International Trucks Fault Codes List (DTCs) for Model: 3200, 4100, 4300, 4400, 7300, 7400, 7500, 7600, 7700, 8500, 8600, BE 200, CE Bus, CXT, DuraStar, LoneStar, MXT, ProStar, RXT, TranStar, WorkStar. See also: International Trucks Service Repair Manuals PDF

Are there any international engines with a 197 fault code?

What is the engine code for a 9400i?

136:F08 SID 003 is for left rear abs wheel speed sensor failure, or circuit. 136:F01 SID 003 is also another code for the left rear abs sensor. Right now only your ABS light should be on. Only the ABS shows a problem. Then engine codes are only old ones that need to be cleared out. You cannot clear codes from the dash display.

What is the fault code for a Volvo?

FMI 3 The voltage on the contact block of the internal combustion engine EA2 is higher than 4.95 V. A short to the power or signal wire, or the sensor is faulty. FMI 4 The voltage on the contact block of the internal combustion engine EA2 is below 0.08 V. Break of the power supply wire or sensor signal.

What does FMI 14 mean on a Volvo?

FMI 14 The code informs you that the electric fuel pump has been turned on. Not a malfunction code. FMI 1 Low engine oil level, level sensor faulty. FMI 4 The voltage at the contacts of the engine block EV15-EB22 is lower than 0.5 V. A short to negative or to a signal wire. The level sensor may be faulty.

When did Cummins start issuing ISX fault codes?

These codes pertain to the ISX engines built between 2007 and 2010. These engines are easily identified by having a DPF and regen on a regular basis. These codes do NOT pertain to engines using DEF.

When did the ISX engine codes come out?

These codes pertain to the ISX engines built between 2007 and 2010. These engines are easily identified by having a DPF and regen on a regular basis. These codes do NOT pertain to engines using DEF. 111 Engine Control Module Critical Internal Failure – Bad Intelligent Device or Component

What is the problem on Kenworth code 428?

Anyone know what usually the problem is on Kenworth code 428, “water in fuel indicator sensor circuit”. Not sure where indicator actually is, plug on bottom of filter next to drain? 07 T300 Cummins.

What is the fault code on a Cummins ProStar?

Cummins ISX serial #79266759 in a 2008 international prostar with Engine Module fault code 5298 17. What is the malfunction and solution to … read more FIELD SERVICE TECHNIC… FIELD SERVICE TECHNIC… Hi, I am having a yellow triangle plus warn engine display from time to time on my 2009 Prostar ISX Cummings.

Which is the most severe ISX engine fault code?

415 Engine Oil Rifle Pressure – Data Valid But Below Normal Operating Range – Most Severe Level 418 Water in Fuel Indicator – Data Valid But Above Normal Operating Range – Least Severe Level 421 Engine Oil Temperature – Data Valid But Above Normal Operating Range – Moderately Severe Level

What is the fault code for Cummins CM871?

The ISX CM871 was a big deal, as this is the first year Cummins started to place diesel particulate filters (DPFs) in commercial trucks. This filter traps particulate matter (also called “soot”) created by the engine. The DPF system is still used on commercial trucks today. There are 251 fault codes for this engine line.

Why do I have a fault code on my Cummins?

The ECM has detected an error with the injection timingPossible reduced engine performance. This fault code is intended to identify fueling quantity and timing issues. In addition to injector over or under fueling, the following potential system defects trigger this fault code:

What do you need to know about a Cummins fault code?

You may have to get the ECM updated to support this test. Injector Solenoid Driver Cylinder 6 – Mechanical System Not Responding or Out of Adjustment. The ECM has detected an error with the injection timingPossible reduced engine performance. This fault code is intended to identify fueling quantity and timing issues.

What is the 197 code on an international engine?

If you have an International with an International engine the 197 code has nothing to do with the engine. No International engines have a 197 fault code. If your truck has a Cummins engine, 197 is for low coolant level. 3HTrucking and Captredbeard Thank this. I have 4 fault codes on my 2005 Intl 9200i, ISM Cummins.

What are the ISX fault codes for Cummins trucks?

ISF 2.8, ISF 3.8, ISB, ISC, ISL, ISLe , ISDe , QSB 3.3 A high signal voltage or an open circuit is detected in the coolant temperature sensor circuit. The ECM detects that the coolant temperature sensor signal voltage is greater than 5.13 VDC for more than 1 second.

What does ECM mean on an intake manifold?

The ECM determines that the voltage signal of the pressure sensor in the intake manifold exceeds the value specified in the calibration for more than 1 second. ISF 2.8, ISF 3.8, ISB, ISC, ISL, ISLe , ISDe , QSB 3.3 The intake manifold pressure sensor circuit is undervoltage or short circuit.

How does the pressure sensor on the intake manifold work?

Insert a test lead into the keyswitch input signal pin of the original equipment manufacturer (OEM) harness connector. Connect the lead to the multimeter probe. Touch the other probe to a clean, unpainted surface on the engine block ground. Turn the keyswitch to the ON position. The measured voltage mustshow battery voltage.

Where is the pressure sensor on the ISX CM870?

Intake Manifold Pressure Sensor (019-061) Signature and ISX CM870 Key Switch Battery Supply Circuit Section 19 — Electronic Engine controls Page 19-55 Intake Manifold Pressure Sensor (019-061) Remove Slide the locking tab on the top side of the connector to the unlock position.

What are the trouble codes for Cummins ISX engines?