Is there a fault in my Ford Focus?

I have recently bought a 2005 Ford Focus TDCi 1.8. In the first week it developed a fault with a loss of power and the ‘Engine System Fault’ warning light came on.

What does the oil pressure light mean on a Ford Focus?

If the oil pressure light stays on after starting the vehicle or illuminates whilst driving, this indicates a malfunction. As soon as it’s safe to do so, stop the vehicle and turn off the engine. check engine oil levels – see how to check engine oil, but do not resume the journey even if oil levels are correct. Ford Focus engine warning light

What does the second warning light on the Ford Focus mean?

Whilst the system is malfunctioning, it is deactivated. The second light it also traction control that’s displayed on older versions of the Focus. If traction control is manually switched off, the dashboard warning light will illuminate. The light will extinguish once the traction control system has been reactivated.

Why is the engine management light on in my Ford Focus?

It’s been great reading the codes and advsing the garage, as they haven’t scanned it with their version, which costs nearly £100. Get on OBD2 code reader; less than £20; then you’ll know why the light is on. Often it can be for something minor like a misfire or cat efficiency below optimum.

I have recently bought a 2005 Ford Focus TDCi 1.8. In the first week it developed a fault with a loss of power and the ‘Engine System Fault’ warning light came on.

Are there any warning lights on my Ford Focus?

Pulled over, turned off the car, restarted and it was fine – drove the 30 minute journey to work with no issues. Had a look online and saw the dashboard diagnostic trick, so tried that an no DTC codes logged (and no warning lights on either).

What are the different types of Ford warning lights?

ABS: When the Anti-Lock Braking System (ABS) light flips on, the normal braking system is working fine, but the ABS is malfunctioning. Unless the separate BRAKE warning system comes on, continue driving, but make an appointment today to get this fixed. Brake Lights: When illuminated with the engine on, the parking light is engaged.

Why is the Check Engine light on on my Ford Focus?

The contact stated while at a standstill the vehicle had difficulty starting, when the vehicle was started and loses approximately 1/4 tank of gas and the brake pedal was depressed, the vehicle would stall. The vehicle was able to be restarted.

Why does my Ford Focus stall while driving?

There are more than a few faulty purge valve and similar type valves on the Ford Focus possibly causing excessive vacuum in fuel vapor management system. The excessive vacuum may result in an engine stall while driving,. Without warning and without the ability to restart the vehicle, increasing the risk of a crash.

What’s the campaign number on a Ford Focus?

Upon investigation the contact associated the failure with NHTSA campaign number: 18v735000 (fuel system, gasoline). The manufacturer had been informed of failure and was told that since the dealer cleared the vehicle from the recall they couldn’t do anything.

When do I lose power in my Ford Focus?

Intermittently losing power with either the engine system fault appearing on the display…or the red light coming on next to the display. Happens mostly when we’ve slowed to a stop at junction…in traffic… No error codes appear when scanned with laptop or self test. Changed battery and will be changing spark plugs and coil pack shortly.

When to change spark plugs on Ford Focus?

No error codes appear when scanned with laptop or self test. Changed battery and will be changing spark plugs and coil pack shortly. And only happens when its damp or cool.

Where is Bank 1 sensor on Ford Focus?

The bank1 sensor is located in the engine bay almostbat the tip of the exhaust manifold that connects to the engine. When you open your bonnet check for something that looks similar to a spark plug attached with a wire. As for bank 1 sensor 2.

What is the DTC code on a Ford Focus?

I can now confirm that DTC code indicated is P2135. The generic code scanner describes this code as “Throttle / Pedal Position Sensor / Switch A/B Voltage Correlation”. From what I can tell to Ford this code is a “Throttle body fault code” and indicates “Throttle position sensor ratio error”.

How old is the engine on a Ford Focus?

Have had intimitent what I would call “stutters” on my Focus occasionally during the 13 months I have had it. (one previous owner, bought at 2.5 year old, 25,000 on clock, now done 42,000). Power loss is similar to someone lightly dabbing the brake, hardly detectable to a passenger but detectable and annoying to the driver.

How to reset the engine management light in Ford Focus?

Try the cleaner and reset the light. If that only works temporarily then clean again and sell. Thats if you don’t want to part with £1500. Then its someone elses problem.

Why did my Ford Focus go into limp mode?

The car went into ‘Limp Mode’ after displaying the ‘Engine System failure’ message on the dash after motorway drive. Called out the RAC but they could not diagnose any faults so recommended that the car was checked out by Ford. Ford diagnosed that the problem as a faulty throttle body and both this part and the wiring loom had to be replaced.

Is the Ford Focus LS still in production?

Ford Focus LS (2004-2007) has been discontinued. See all Ford Hatchbacks. See the Best Hatchbacks in 2021 as rated by Australians on ProductReview.com.au. Cleaning & Maintenance ? Your trust is our top concern. Companies can’t alter or remove reviews from ProductReview.com.au.

What are the fault codes for Ford Focus Club?

P1199 Fuel level input circuit low P1201 Injector circuit open / shorted – cylinder 1 P1202 Injector circuit open / shorted – cylinder 2 P1203 Injector circuit open / shorted – cylinder 3 P1204 Injector circuit open / shorted – cylinder 4 P1205 Injector circuit open / shorted – cylinder 5 P1206 Injector circuit open / shorted – cylinder 6

How many miles does a Ford Focus ST have?

£7000 is top book for a 2006 Focus ST with 63,000 miles. Bought from a Ford dealer it should be absolutely spot on. Another poster with time to write a story. Ford Focus ST – ford focus st ENGINE SYSTEM FAULT !!!!!

Is the Ford Focus Still under warranty?

My Focus is 57 reg and hence still under Ford warranty. Same symptoms as described by other contributors. To local Ford garage today, couldn’t find the fault. They did tell me that for the car to record the fault the engine light has to come on (mine hasn’t) and that cars memory deletes any recorded faults after 30 uses of the ignition.

What is the lane departure warning light on a Ford Focus?

The lane departure warning light will illuminate when the system is deactivated or in conjunction with a message. The system monitors lane discipline and warns of lane drifting. The gear shift / change indicator light will illuminate on the dashboard to inform you that changing to a higher gear will offer better fuel economy.

What does the ABS warning light on Ford Focus mean?

ABS warning light. If the Ford Focus ABS dashboard warning light illuminates whilst driving, it indicates there is a malfunction within the Anti-lock Braking System (ABS). Normal braking will continue without the use of ABS.

Why is the second light on my Ford Focus not working?

If it does not illuminate after turning on the ignition, if the symbol illuminate continuously during driving, it indicates a malfunction. Whilst the system is malfunctioning, it is deactivated. The second light it also traction control that’s displayed on older versions of the Focus.

How to tell if your focus has a transmission malfunction?

Ok, so to be clear My focus on transmission malfunction sign, revs more than suppose to, sometimes it reaches the 3 bar and normal I used to reach the 2 bar. when trying to stop the car (applying brakes ) it doesn’t realize that it needs to stop but you can feel the engine revs for 3 seconds.

Have had car fail again several times and have borrowed a OBDII code scanner to plug into car when error has occured. I can now confirm that DTC code indicated is P2135. The generic code scanner describes this code as “Throttle / Pedal Position Sensor / Switch A/B Voltage Correlation”.

What does the red exclamation mark mean on a Ford Focus?

This technology reduces fuel consumption and reduces CO2 emissions. The red cog with a red exclamation mark warning light signifies a fault with the powertrain. Typically, the usual reason is a fault with the faulty glow plug relay or a fault with the glow plugs. Diagnostics will specify the exact fault. Vehicle is safe to drive.

What does error code p242f mean on Ford Focus?

This weekend I got error code P242F stating “diesel particulate filter restriction ash accumulation” and the vehicle has gone into limp mode. I first had the same error a few months ago and was fortunate enough to be able to clear it using my OBDII tool and a ‘hi-rev’ journey up and down the motorway.

What’s the error code on my Ford Focus?

I first had the same error a few months ago and was fortunate enough to be able to clear it using my OBDII tool and a ‘hi-rev’ journey up and down the motorway. Unfortunately I’m not as lucky this time and I’m seemingly stuck with the error for now.

What happens when the instrument cluster fails on a Ford Focus?

You will notice the immobilizer light flashes continuously when the instrument cluster fails and the mileage reading will only show dashes (——-) instead of the mileage. Often the instrument cluster will fail completely and stay that way.

Is the Ford Focus 1.6 TDCi fault code?

Purchased a 2012 1.6 DCI Focus , sometimes when driving it would appear to judder almost like it has a cough and eventually the eml would come on , acceleration would be really slow

Why is the engine warning light on in my Ford Focus?

What had happened was that in the testing process, perhaps revving the engine, it had pulled a strong vacuum in the hose that is tucked under the inlet manifold ( 3 way hose half an inch across or so) and split it on the corner. Obviously the hose was getting old! This caused it to register unmetered air and to run lean.

What does the ESP / Bas warning light on Ford Focus mean?

ESP/BAS warning light. The ESP/BAS Ford Focus warning light is related to ABS. If this light illuminates, it suggests a problem with the Electronic Stability Program. The ESP/BAS light will often illuminate alongside the ABS warning symbol.

What was the warning light when my car broke down?

In the first week it developed a fault with a loss of power and the ‘Engine System Fault’ warning light came on. The dealer fitted a new fuel filter but it lasted less than 24 hours before breaking down again with the same problem, except that this time the engine cut out completely and I couldn’t restart it and had to be towed home.

No error codes appear when scanned with laptop or self test. Changed battery and will be changing spark plugs and coil pack shortly. And only happens when its damp or cool.

What does the ESP / Bas symbol mean on a Ford Focus?

The ESP/BAS light will often illuminate alongside the ABS warning symbol. The tyre pressure monitoring system (TPMS) may not be available on earlier verions of the Ford Focus. The tyre pressure warning light will illuminate on the dashboard to inform the driver that air pressure has fallen to or below the 25% threshold limit.

What causes rear light clustets on Ford Focus Mk2?

Rear light clustets boot hinges and spoiler seal all leak tell tale signs is a damp or wet boot process of elimination though its best to use quality sealant and seal all 3 suspected areas.

What is power loss in a Ford Focus?

Power loss is similar to someone lightly dabbing the brake, hardly detectable to a passenger but detectable and annoying to the driver. Loss is not quite enought to visibly move the rev counter down.

What are the warning lights on a Ford Focus Mk2?

We have created this Ford Focus Mk2 dashboard lights meaning guide and will show you how to deal with an engine light, airbag warning light, ABS light and all of the other car warning signs on your dashboard. You might need to buy a scanner online which will show Ford trouble codes and clear the warning light for good.

Is there an engine system fault on a Ford Focus?

We also have a new set of Forum rules so please take the time to give them a read and familiarise yourself. Engine Systems Fault on Ford Focus? I’ve got an ’08 Ford focus diesel and over the last few weeks the Engine Systems Fault warning has come up, but when I restart the car it’s gone again.

Why does my Ford Focus say transmission failure?

Ive driven my 2007 Ford Focus sport for over a year and the issue began a few months ago. It’s a 1.6 Sport variation with auto transmission. The car randomly says ‘transmission malfunction’ and ‘engine systems failure’ whilst driving and the rev and speed gauges sit at zero.

What does the ignition warning light on a Ford Focus mean?

Ignition warning light. If the ignition warning light illuminates whilst driving, it is indicating a malfunction. Immediately switch off all unnecessary electrical equipment and have the vehicle assessed by a trained technician immediately.

What does the engine management warning light mean?

The engine management warning light is different from the other lights on your dashboard, as it doesn’t alert you to a specific fault. Unlike the coolant temperature warning or low oil level warning lights, the engine management light (EML) can be triggered for a number of reasons.

How do you reset the PCM on a Ford Focus?

Step 1 Open the hood of the Ford. Loosen the lock nut located on the negative battery cable connector with a socket and ratchet. Wait for 20 minutes while the PCM bleeds off the electricity it stores for backup power. Once the power drains from the PCM, it resets.

What are the problems with a 2002 Ford Focus?

The B+ terminal could break because it had an incorrect harness, leaving the cable loose. Ford Focus RS models built during December 2002 might have had problems with their brake hoses. They could chafe against the rear wheelarch liners causing a failure. Ford should have fixed this for free, so make sure the work has been carried out.

What are the symptoms of a Ford Focus engine failure?

Common Failure symptoms: 1 Loss of all instrument cluster functions and lights 2 Speedometer, temperature and rev counter drops to zero 3 Engine cuts out while driving 4 Non start 5 Immobiliser light flashes 6 Mileage shows dashes 7 Erratic gauges 8 Pixilated screen

What causes a Ford Focus to cut out while driving?

Ford Focus Dashboard Instrument Cluster – common fault This Ford Focus instrument cluster is a very common failure, this will cause an intermittent failure of all instruments, lights and gauges. If the instrument cluster fails while driving, then this will often cause the engine to cut out.

When did the first Ford Focus come out?

In this article, we consider the first-generation Ford Focus, produced from 2000 to 2007. Here you will find fuse box diagrams of Ford Focus 2000, 2001, 2002, 2003, 2004, 2005, 2006 and 2007, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

How to rebuild a Ford Focus dashboard cluster?

To pay for the rebuild click the link above, select your cluster and click: Get yours rebuilt Print the payment/booking confirmation email. Package the Ford Focus dashboard instrument cluster inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).

What are the symptoms of an instrument cluster failure?

Common Failure symptoms: Loss of all instrument cluster functions and lights. Speedometer, temperature and rev counter drops to zero. Engine cuts out while driving. Non start. Immobiliser light flashes.

Is there a fault in the Ford FOCUS cluster?

Unfortunately, that is the common cluster fault. The solder on the main connector needs re-soldering as they get dry joints and the vehicle looses comms with the modules on the car. Plenty of places offer a repair and return service (check Ebay, search Focus MK2 cluster repair) it’ll cost you about £50-60

What is the temperature warning light on a Ford Focus?

Sensors detect outside air temperature. The warning light symbol will illuminate amber in colour when the air temperature outside the vehicle is between +4°C (39°F) and 0°C (32°F). As temperatures fall below 0°C (32°F) It will glow red. During normal driving, the traction control dashboard light flashes after activation of the system.

Is there an engine malfunction on a Ford Focus?

Engine Malfunction on a 1.6TDCi 16 valve… Been there and then lost my engine a few months later to a spectacular engine run away. Get it onto Forscan as that will pull all the information out that you need as these engines are so fragile if not looked after correctly.

What was the problem with the Ford Zetec engine?

Early versions of the engine had a problem with sticking valves – far more evident in the UK (and in cold climates), where a driving style with earlier gear changes is more common than on the Continent – unless a special Ford formulation of oil was used. After small changes in 1995 to fix this problem the engine was known as the Zetec-E.

When did the Ford Fiesta LX get the Zetec name?

In 1998, Ford of Britain applied the Zetec name to a trim level in the Fiesta range, replacing the Si. Petrol variants of the Fiesta LX were also renamed “Zetec LX,” although this ceased within months. Since then, the Zetec name has become a key staple of the Ford trim level hierarchy, serving as the sports-styled variant in most ranges.

Is there a warning light on a Ford Focus?

There was not a warning light or an engine management light. There was no funny … read more I have an ’02 2.0l petrol Ford Focus Zetec that has done 86,000 miles. When I start up there is often blue smoke coming out the exhaust, when I drive there is an occassional judder as if the engine ha … read more

Is there a fault in my Ford Focus?