Other

Is the steering column the same as an Astro van?

Is the steering column the same as an Astro van?

The Vehicles is similar to the Vehicles Astro Van, as all their parts are interchangeable. The multifunction switch in the steering column is designed to control the turn signals, windshield wipers, cruise control and the dimmer switch. When one of these functions ceases to work, it is imperative that you replace the entire switch.

When to replace the Multi-Function Switch in vehicles?

The hazard flasher activation button and turn signal stalk are part of the multi-function switch assembly. When the time comes to replace the multi-function switch in your Vehicles if you have entry-level auto-repair experience, you can perform the job yourself.

When does a Multi Function Switch go bad?

When two or more of these systems experience malfunctions simultaneously, it’s a good bet your multi-function switch has failed. The hazard flasher activation button and turn signal stalk are part of the multi-function switch assembly.

How do you change the turn signal switch?

Disengage the harness connector from the turn signal switch. Take out the screws that secure the multifunction turn signal switch to the steering column. Remove the switch from the column. Set the new multifunction turn signal switch in place on the steering column. Put the screws in place by hand then torque them to 17 inch lbs.

The Vehicles is similar to the Vehicles Astro Van, as all their parts are interchangeable. The multifunction switch in the steering column is designed to control the turn signals, windshield wipers, cruise control and the dimmer switch. When one of these functions ceases to work, it is imperative that you replace the entire switch.

Disengage the harness connector from the turn signal switch. Take out the screws that secure the multifunction turn signal switch to the steering column. Remove the switch from the column. Set the new multifunction turn signal switch in place on the steering column. Put the screws in place by hand then torque them to 17 inch lbs.

How to replace multifunction switch in GMC Sierra?

1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, faded, worn or faulty multifunction/turn signal stalk, high beam and wiper switch. This video is applicable to the 95, 96, 97, 98, 99 GMC Sierra

What is the multifunction switch in the steering column?

The multifunction switch in the steering column is designed to control the turn signals, windshield wipers, cruise control and the dimmer switch. When one of these functions ceases to work, it is imperative that you replace the entire switch. This makes the installation process easier, as the switch is held in place by just two screws.

How to replace the turn signal switch in a 98 Sunfire?

How to Replace Turn the Signal Switch in a 98 Sunfire. Sit in the Sunfire’s driver’s seat and pry the trim collar off the upper steering column with a trim tool to expose the turn signal switch assembly. Pull the turn signal wiring pigtail out of the Sunfire’s turn signal switch body with your fingers.

How to remove turn signal switch from steering column?

Remove the screws and take off the lower and upper steering column covers. Disengage the harness connector from the turn signal switch. Take out the screws that secure the multifunction turn signal switch to the steering column. Remove the switch from the column.

How to check and replace a turn signal Flasher?

1 Locate your relay cluster. You can find this in your car’s owner’s manual. 2 Locate the turn signal relay. This should also be in your owner’s manual. If it’s not, you can consult a service manual for your car. 3 Once you can see your relays, remove the old turn signal flasher relay and replace it with the new one.

Where do I find the turn signal relay?

Locate the turn signal relay. This should also be in your owner’s manual. If it’s not, you can consult a service manual for your car. Once you can see your relays, remove the old turn signal flasher relay and replace it with the new one. Don’t worry about installing it incorrectly, it will only go in one way, the right way.

Where are the bulbs on a turn signal?

Tracking down a loose wire or a ground that isn’t grounding can be a pain in the neck. But let’s get to it. In order to replace your bulbs, you had to access the back of the turn signal housings. Also in this location, you’ll find the plugs that connect your tail lights and front turn signals to the car’s electrical system.

What’s the best way to troubleshoot a turn signal?

Matthew Wright has been a freelance writer and editor for over 10 years and an automotive repair professional for three decades specializing in European vintage vehicles. Turn signals are one of the easiest systems in your car to troubleshoot.

Author Image
Ruth Doyle