How to disable Auto lock on Chevy Silverado?
How to disable Auto lock on Chevy Silverado?
To disable the auto-lock function, press the LOCK side of the power door-lock switch on the door panel TWICE. This will turn off the auto-lock feature. At least, this is how it works on my 01 Silverado, it’s worth a go…If you don’t mind me asking, why do you want to do this?
How to turn off the automatic door lock?
No doors lock/None of the doors unlock:: the door panel twice. This turns off the automatic door lock feature. : 1.Start with the ignition OFF, hold down the power unlock button on the door panel. Turn ignition key ON, : OFF, ON, OFF. Release power unlock button on the door panel. The locks will cycle once.
What kind of door lock does a Chevy Silverado have?
The switch is a single-throw double-pole that turns two circuits on/off independent of each other. This panel is easily pulled out for access such as mounting these aftermarket switches. Our 2009 Chevrolet Silverado has a nice engine (Duramax) and a nice tranny (Allison).
Do you need a door lock actuator on a Chevy Silverado?
We don’t need the door lock actuators snapping up and down like the remote operated locks at a max security prison, every time we shift, wearing themselves out and costing upwards of a hundred dollars and six hundred swear words each to replace (they’re entombed in the doors like a royal Egyptian burial and take hours to DIY swap).
To disable the auto-lock function, press the LOCK side of the power door-lock switch on the door panel TWICE. This will turn off the auto-lock feature. At least, this is how it works on my 01 Silverado, it’s worth a go…If you don’t mind me asking, why do you want to do this?
No doors lock/None of the doors unlock:: the door panel twice. This turns off the automatic door lock feature. : 1.Start with the ignition OFF, hold down the power unlock button on the door panel. Turn ignition key ON, : OFF, ON, OFF. Release power unlock button on the door panel. The locks will cycle once.
The switch is a single-throw double-pole that turns two circuits on/off independent of each other. This panel is easily pulled out for access such as mounting these aftermarket switches. Our 2009 Chevrolet Silverado has a nice engine (Duramax) and a nice tranny (Allison).
We don’t need the door lock actuators snapping up and down like the remote operated locks at a max security prison, every time we shift, wearing themselves out and costing upwards of a hundred dollars and six hundred swear words each to replace (they’re entombed in the doors like a royal Egyptian burial and take hours to DIY swap).
How do you deactivate auto lock on a Honda Accord?
Turn the ignition back to on. The horn should beep once. This tells you that you’re now in programming mode. Press the Unlock button, then press Lock again. The horn will beep once to tell you that Auto Lock was deactivated. It will beep twice if you’re reactivating the system.
How does a Chevy Silverado automatic door lock work?
With the CT6100 simply connect your wiring harness with a couple of spade connectors, finish with heat shrink tube. The CT6100 isolates both sides of the fuse socket without any fiddling around. (Remember to add fuse holders into your harness since you’re eliminating a fuse here to create your connection).
Where are the fuses on the automatic door lock?
1. ID which fuses are on the automatic door lock circuits. In our case with 2009 Silverado 2500 HD, the fuses were easily located using the owner’s manual; they’re in the cabin fuse panel on the left side of the dash. Experiment by removing fuses and seeing how the locks behave.
Is there a toggle switch for automatic door lock?
A simple toggle switch is much nicer.) Time for a hardware hack. Sorry digital age — sometimes a toggle switch is better. The process is simple. ID the fuses on the automatic door lock circuits, bypass with a switch. Challenge is making a couple of bypass harnesses for the mini ATM fuses.
How to turn off auto door unlock on GMC Sierra?
Press the customization button until AUTO DOOR UNLOCK appears on the DIC display. Press the set/reset button once to access the settings for this feature. Then press the customization button to scroll through the following settings: OFF: None of the doors will automatically unlock.
How do you activate or deactivate the auto lock feature?
Turn the ignition off. Press the Unlock button three more times. Turn the ignition back to on. The horn should beep once. This tells you that you’re now in programming mode. Press the Unlock button, then press Lock again. The horn will beep once to tell you that Auto Lock was deactivated.
