How to change the door lock on a Chevy Silverado?
How to change the door lock on a Chevy Silverado?
1 Pop the window and door lock switch panel off the door handle. 2 Unplug the door lock connectors and inspect to make sure nothing stands out. 3 Follow lead wire to the door lock actuator. 4 If any wiring is damaged, replace them.
Why does my driver side door lock not work?
The windows and the locks are on two separate circuits. The only part that these two have in common is the master switch. Of course it is also possible that the wiring harness between the driver side door and cowl is corroded and that some of the pins are to corroded or even broken off and do not make contact.
Why does my drivers side window not work?
A smaller version of GM’s rebirth of the Hummer. Hard to start yesterday,drivers side window,power door locks wont work,either by buttons on both doors or on key fob.Other windows work! Replaced Battery checked door lock fuse,still no drivers side window or door locks. Answered! View the answer I have this problem too Is this a good question?
How do you change the power door lock?
Do not remove the key from the ignition. Press and hold the power door lock button until the DIC display shows the current door lock mode. To view the next available mode, press and hold the reset stem until the mode appears. Release the reset stem and press and hold again to view the next mode.
1 Pop the window and door lock switch panel off the door handle. 2 Unplug the door lock connectors and inspect to make sure nothing stands out. 3 Follow lead wire to the door lock actuator. 4 If any wiring is damaged, replace them.
What’s the switch on the left side of a Silverado?
Replacement Power Window Switch – This switch replaces the left or driver side power window switch also known as the master power window switch on your Silverado, Traverse, HHR & Sierra. This switch provides includes controls for all 4 power windows and power door locks on your truck.
The windows and the locks are on two separate circuits. The only part that these two have in common is the master switch. Of course it is also possible that the wiring harness between the driver side door and cowl is corroded and that some of the pins are to corroded or even broken off and do not make contact.
What should I replace the door handle on my 2013 Chevy Silverado?
Chevy Silverado 2013, Exterior Door Handle by Replace®. Put your vehicle back in top shape and replace your exterior door handle with the high quality and affordable price of Replace products. Designed with high quality and durability…
Where is the door lock relay located on a 1998 GMC Sierra?
The door lock relay is located under the center of the dash. Wow! This is probably why none of my searches are producing informative results. I also currently own a 1998 GMC Sierra truck and the dash looks identical. I have the Chilton manual for my 98′ but it never dawned on me to look.
What to do if your door lock does not work?
If the driver door lock switch doesn’t work, try the passenger door lock switch or any other door. If they work, then you’ve narrowed down your problem. If they do not, then you may have a bigger issue.
Can a power door lock only lock the passenger side?
On the passenger side the power door switch will unlock and lock the drivers side door but it will only unlock the passenger side. So that is the trouble I’m having Neither switch will lock the passenger side, I was wondering out of the three relays what one could cause that.
