How to bypass security 2001 blazer?
How to bypass security 2001 blazer?
Turn ON the ignition, with the engine OFF. Attempt to start the engine, then release the key to ON (vehicle will not start). Observe the SECURITY telltale light, after approximately 10 minutes the telltale light will turn OFF. Turn OFF the ignition, and wait 5 seconds .
How do you turn off PassLock on a Chevy?
Key on, press volume till readout says SETTINGS then scroll to the Security to toggle off by pressing reset ( watch YOUTUBE). I personally see no sense of having no security system so try the RELEARN method. Other thing is that the Ignition Switch has a Sensor on it and the wire clip comes loose.
How do I Turn Off the PassLock security light?
1. Turn the key to ON and attempt to start the engine and release the key to the ON position. 2. The SECURITY light will illuminate. Wait 10 minutes until it turns off. 3. Turn the key to OFF for 10 seconds. 4. Turn the key to ON and attempt to start the engine. If it starts and run, the system has reset.
Why does my PassLock not work on my car?
The following information can help to determine the cause of the problem. The PASSLock system does not disable the starter; it only disables the fuel after the engine has started. If the vehicle will not crank, PASSLock cannot cause this condition. If the vehicle starts, but stalls quickly, this condition can possibly be related to PASSLock.
Why is the security light blinking on my Blazer?
I had the same problem 2 years ago with my 2000 Blazer. I went through hell trying to figure out the problem with many mechanics. If the security light is blinking you have to wait 10-15 minutes for the system to recycle. When the light stops blinking it will start.
1. Turn the key to ON and attempt to start the engine and release the key to the ON position. 2. The SECURITY light will illuminate. Wait 10 minutes until it turns off. 3. Turn the key to OFF for 10 seconds. 4. Turn the key to ON and attempt to start the engine. If it starts and run, the system has reset.
Key on, press volume till readout says SETTINGS then scroll to the Security to toggle off by pressing reset ( watch YOUTUBE). I personally see no sense of having no security system so try the RELEARN method. Other thing is that the Ignition Switch has a Sensor on it and the wire clip comes loose.
The following information can help to determine the cause of the problem. The PASSLock system does not disable the starter; it only disables the fuel after the engine has started. If the vehicle will not crank, PASSLock cannot cause this condition. If the vehicle starts, but stalls quickly, this condition can possibly be related to PASSLock.
How to turn off GM PassLock security Telltale?
Here it is in it’s entirity. Turn ON the ignition, with the engine OFF. Attempt to start the engine, then release the key to ON (vehicle will not start). Observe the SECURITY telltale, after approximately 10 minutes the telltale will turn OFF. Turn OFF the ignition, and wait 5 seconds .
