How old is my cat 277c track loader?
How old is my cat 277c track loader?
Discussion in ‘ Track Loaders ‘ started by uzz32soarer, Jan 27, 2016 . Hi Guys, I’m a newbie here from the other side of the World but I’m having an issue that needs some outside expertise. I have a 277C with only 200 hours on it, but it is three or four years old.
How to turn off the light and beeper on Cat 277c?
At first the light and beeper came up and stayed on until forward motion stopped and hand was off joystick. Then after a while it actually stopped the machine, no forward or backward motion just the bucket still operating fine. Turn off the machine and do a full restart and it came back again.
Where is the cable on a cat 277c?
The right side cable was beautifully placed in a cleft created by the two hydraulic lines. Well protected and laid. Left side was a mess. Wrapped around hydraulics, more exposed, clearly no care placing that when the machine was wired.
How are speed sensors on a cat 277c?
The speed sensors break away from the main loom at two plugs. Then each side has a short 650mm plug to plug loom with the four wires in it. These looms exit the sides of the machine and plug to the sensors. I started out inside the machine at the entry to the first plugs from the ECM and had 8.14v on both sides of the plug.
Discussion in ‘ Track Loaders ‘ started by uzz32soarer, Jan 27, 2016 . Hi Guys, I’m a newbie here from the other side of the World but I’m having an issue that needs some outside expertise. I have a 277C with only 200 hours on it, but it is three or four years old.
The speed sensors break away from the main loom at two plugs. Then each side has a short 650mm plug to plug loom with the four wires in it. These looms exit the sides of the machine and plug to the sensors. I started out inside the machine at the entry to the first plugs from the ECM and had 8.14v on both sides of the plug.
At first the light and beeper came up and stayed on until forward motion stopped and hand was off joystick. Then after a while it actually stopped the machine, no forward or backward motion just the bucket still operating fine. Turn off the machine and do a full restart and it came back again.
How does a cat 277c exclamation warning work?
Pop off both plugs and they were perfectly clean, not even a spec of dust had penetrated the plug seals. The sheath close to the sensor was wrapped around the hydraulic fitting and then went down to the sensor but there were two small perforations in the sheath close to the large hydraulic nut.
Pop off both plugs and they were perfectly clean, not even a spec of dust had penetrated the plug seals. The sheath close to the sensor was wrapped around the hydraulic fitting and then went down to the sensor but there were two small perforations in the sheath close to the large hydraulic nut.
What makes the cat 279d compact track loader so good?
The Cat 279D Compact Track Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power. Its standard, suspended undercarriage system provides superior traction, flotation, stability and speed to work in a wide range of applications and underfoot conditions.
How big is a small specalog for cat 279d?
Operating Specifications* Operating Weight 4487 kg 9,893 lb Rated Operating Capacity: 35% T ipping Load 932 kg 2,055 lb Power Train 50% T ipping Load 1331 kg 2,935 lb Travel Speed (Forward or Reverse): Rated Operating Capacity One Speed 7.2 km/h 4.5 mph with Optional Counterweight 1444 kg 3,185 lb
What kind of engine does a cat 279d3 have?
Cat ® 279D3 C ompaCt t raCk L Specifications . Engine Power Train . Engine Model Cat C3.3B DIT (turbo) Gross Power SAE J1995 55.4 kW 74.3 hp Net Power SAE 1349 54.4 kW 72.9 hp Net Power ISO 9249 54.9 kW 73.7 hp Peak Torque at 1,500 rpm SAE J1995 265 N·m 195 lbf-ft
Where can I find part number for cat 277c?
I’ll check with Cat in Melbourne but I’m thinking that it’s going to be prohibitively expensive and I may have to get one from the States. Seems that the part number is 2623764 and it looks like the attached image. Would anyone with a parts manual care to confirm the number for me please?
What makes a cat 277c yellow exclamation warning?
Left side was a mess. Wrapped around hydraulics, more exposed, clearly no care placing that when the machine was wired. Off with the cable ties and lay the look properly and inspect every cm at the same time.
Left side was a mess. Wrapped around hydraulics, more exposed, clearly no care placing that when the machine was wired. Off with the cable ties and lay the look properly and inspect every cm at the same time.
Which is Cat D compact track loader do you use?
Built for low ground pressure with outstanding performance, comfort and versatility, the Cat D Series Compact Track Loaders help you get more done to improve your bottom line. Operator Station
How many horsepower does a 279d track loader have?
279D/289D Compact Track Loaders Engine 239D 249D 259D 279D 289D Gross Power (SAE J1995) 50.1 kW 67.1 hp 50.1 kW 67.1 hp 55.4 kW 74.3 hp 55.4 kW 74.3 hp 55.4 kW 74.3 hp Weights Operating Weight 3306 kg 7,289 lb 3486 kg 7,685 lb 4013 kg 8,846 lb 4487 kg 9,893 lb 4778 kg 10,533 lb Operating Specifications
What is the manual for compact track loaders?
Operation and Maintenance Manual 279C, 289C and 299C Compact Track Loaders MBT1-Up (279C) JMP1-Up (289C) JSP1-Up (299C) SAFETY.CAT.COM i03991620 Important Safety Information
