How much torque does a Ford inline six have?

Torque main caps from the center caps outward and only in one-third values. Lube all bolt threads and contact surfaces for smooth predictable torque application. By one-third values, we mean—40-45 ft/lbs, then, 55-60 ft/lbs, and finally 65-70 total. Then, go back and check final torque.

Can a Ford Super 6.2 liter engine be reused?

Ford V8 Super 6.2 liter Cylinder Head Bolts NOTE: The cylinder head bolts must be discarded and new bolts must be installed. They are a tighten-to-yield design and cannot be reused.

What are the torque specifications for a Ford 4.9L 300ci?

42 504 56.94 Connecting Rod to Crankshaft Nut Type: 2 24 2.71 Pushrod Cover Plate to Engine Block Type: 65 780 88.13 Type: Bolt 80 960 108.47 Cylinder Head Bolts – 3 Step: 55FtLbs; 65FtLbs; 80FtLbs Type: Bolt

What kind of engine bracket does a Ford 4.9L use?

984 111.18 Engine Mount to Chassis/Frame Bracket Type: 82 984 111.18 Engine Mount to Engine Bracket Type: Exhaust Manifold To Cylinder Head

What should torque be on roller rocker arms?

Slowly torque the bolt to 18-20 FT-LBS. Since you are pushing down the plunger in the hydraulic lifter as you torque the bolt, it will probably take a minute or two to complete the procedure. The bolt should have turned between one-quarter to one full turn to reach the torque setting. This will give the correct lifter preload of .020″ to .060″.

Can a cylinder head be modified for rocker arm studs?

Pedestal type cylinder heads can be modified for rocker arm studs (351C illustrated). Machine at right angles to the existing stud hole/bolt hole, not the bottom of the head. The valves in canted valve heads operate at compound angles. For 302/351W cylinder heads, measure from the top of the pedestal.

How much torque does a Ford inline six have?