How much does it cost to replace a ball joint on a Ford Explorer?

Upfront and transparent pricing. Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM. Ford Explorer Ball Joint Replacement (Front) costs $307 on average. What is the Ball Joint Front all about?

How much does it cost to replace a ball joint on a Subaru?

For some more specific estimates of the cost to replace ball joints on common vehicles, using $100 an hour as a labor rate, and adding in an average amount for a wheel alignment: For a 2007 Subaru Forester, the labor to replace the front lower ball joint is .8 of an hour.

How much does it cost to replace ball joint on Honda Civic?

For A 2003 Honda Civic, the labor time to replace the front lower ball joint is 2 hours. It’s pressed into the knuckle, which is usually removed for the service. A factory part costs about $65, or a Mevotech part costs about $35.

How long does it take to replace a ball joint on a 1997 Chevy k1500?

For a 1997 Chevrolet K1500 four wheel drive with torsion bar suspension, the labor time to replace the front ball joints on one corner is 4 hours. This has an independent suspension, but has the disadvantage of the original ball joints being held in by heavy rivets, which must be cut and driven out.

How much does a ball joint replacement cost?

There are also two joints per each wheel. If you want the basic parts for a do-it-yourself ball joint replacement, it may cost around $35 to $75 per ball joint or $130 to $300 for four. If you own a high-end or luxury vehicle, it can cost you more.

Where are the ball joints on a car?

Ball joints are an essential part of a vehicle’s suspension system. There are usually four ball joints in a car’s front suspension, with an upper and lower one on each front wheel. “ New upper and lower ball joints, tie rod ” ( CC BY 2.0 ) by | El Caganer – Over 6 Million views! How much does ball joint replacement cost?

How many ball joints are there in front suspension?

Usually there are four ball joints in a car’s front suspension, with an upper and lower one on each wheel. Depending on the wear pattern on the suspension system, it can be necessary to replace one, two or all four ball joints. Typical costs:

How to replace the front ball joint on a Chevy Silverado?

Remove the wheels. Remove the control arm (s). Remove and replace ball joints. Check the entire suspension system for any problems. When applicable, make sure the ball joints are lubricated during a major service. What common symptoms indicate you may need to replace the Ball Joint Front?

Where are the ball joints on an Acura TL?

Depending on the suspension design, ball joints can be found either in the front or the rear. The vehicle may need to be taken to a shop for wheel alignment after this service. Mobile mechanics do not have the machinery to align wheels. Remove the wheels. Remove the control arm (s). Remove and replace ball joints.

What happens when a ball joint fails in a car?

Loose joints can also cause suspension noise (typically a “clunking” sound when going over a bump). If a ball joint fails, the suspension can collapse, causing a loss of control of the vehicle. Depending on the suspension design, ball joints can be found either in the front or the rear.

What are the ball joints in a car?

Ball joints are part of the suspension system, and consist of a ball and socket that’s encased in a lubricant-filled rubber boot. They link the steering knuckle (which supports the wheel hub, bearing and wheel) to the lower and upper control arms.

How much does it cost to replace a lower ball joint?

Get the ball joint replaced right away if it ends up being the culprit. The cost to replace the lower ball joint is anywhere from $220 to $290. The cost of the parts will only be around $90 to $120, while the labor costs will be from $130 to $170. There will be added fees and taxes applied to these prices as well.

How can I check the ball joint on my front suspension?

If your front suspension uses MacPherson struts, look for a wear indicator, which is usually a grease fitting. Grasp the fitting and try to wiggle it. If the fitting moves around inside the housing, you’ll need to replace the ball joint. Jack up the car on the front cross-member.

How to replace the ball joints to a 99 Ford Explorer?

3) Remove lower ball-joint castle nut and upper ball joint retaining bolt 5) Retract the axle out of the steering knuckle and suspend it using a bungee cord out of the way. 8) Pound the lower ball joint back out with a hammer or use a press tool. 9) Remove upper control arm and replace (It houses the upper joint).

How much does it cost to replace a suspension joint on a Ford Explorer?

The average cost for a Ford Explorer suspension ball joint replacement is between $233 and $276. Labor costs are estimated between $165 and $209 while parts are priced at $68. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

How to replace a steering knuckle hole in a soccer ball?

Guide the new joint through the knuckle hole. Slide the new rubber boot over the ball joint’s stud and guide the new ball joint back up through the steering knuckle hole, where it came from. 2 Bolt the joint into place using the hardware included.

Why do you need ball joint in Ford Explorer?

Ensure every adventure goes smoothly with a new Ford Explorer ball joint. This is an important part of your suspension and allows your SUV to stay properly aligned even when its suspension upright articulates and moves. Your Explorer was made to bring you into the great outdoors, but it’s no stranger to the urban jungle either.

Can a worn ball joint cause a car to lose control?

A vehicle with a significantly worn ball joint should not be driven. If the ball joint fails completely, the control arm can detach from the steering knuckle, meaning you will lose control of the car.

How often do ball joints need to be replaced?

There is no set replacement schedule for ball joints, though most vehicles will need to have them changed at some point. Most ball joints will last for 100,000 miles or more. Rough driving habits may shorten the life of these parts.

How do you check the ball joint on a new car?

Most new cars do not have wear indicators, or a grease fitting. If you can’t find a wear indicator, or if the indicator doesn’t give you a clear enough sign, raise up the car to inspect the joint more thoroughly. Raise the front end of the car.

What happens when a front ball joint fails?

Should a ball joint break, the wheel becomes totally free to move in any direction, which can damage the car’s fender, tire, and several suspension components, if not more. Usually, when front ball joints start to fail, the vehicle will display a few symptoms that alert the driver a problem has occurred.

What does a ball joint on a car do?

A ball joint is essentially a flexible ball and socket that allows the suspension to move and, at the same time, the wheels to steer. Cars and trucks will have multiple ball joint assemblies depending on their type of suspension system. Like any other suspension component, ball joints will eventually wear out and become loose.

What happens when your steering wheel ball joint loosens?

Over time, a car’s ball joints may wear down. If a ball joint starts to loosen, you’ll hear clunking sounds from the front as the joint rattles in the socket. If it tightens up, the steering will bind so you can have a stiff spot as you turn the steering wheel.

What happens if a ball joint fails on a Chevy Suburban?

If a ball joint fails, the suspension can collapse, causing a loss of control of the vehicle. Depending on the suspension design, ball joints can be found either in the front or the rear. The vehicle may need to be taken to a shop for wheel alignment after this service.

How do you replace a ball joint on a Chevy Aveo?

How much does it cost to replace a ball joint on a Ford Explorer?