Other

How much diesel does a train use?

How much diesel does a train use?

Similarly, a typical train might haul 3,000 tons of freight 500 miles and consume approximately 3,049 gallons of diesel fuel. The efficiency of this freight haul would be calculated as: (3000 tons x 500 miles) / (3,049 gallons) = 492 ton-miles per gallon.

How much diesel a railway engine consumes When started?

Much depends on the size of the composition, because it varies according to the weight of cargo being added to the total weight of the composition (train) and the type of engine power and speed and he travels and the type of slope of the rail line can reach 50 liters of diesel per kilometer, or hours worked, because …

What is the mileage of Indian train in diesel?

If we talk about a 12-coach passenger train powered by a diesel engine, then it gives a mileage of one kilometer in 6 liters. On the other hand, even if a diesel engine is traveling with 24 coach express train, it still gives a mileage of 6 liters per kilometer.

How much fuel does a train use per Kilometre?

The average fuel consumed per kilo- meter for all passenger and cargo trains is 7.97 L/ km.

What fuel do trains use now?

Note: Today’s trains are diesel-electric not diesel there is a huge difference) diesel is used to power the main alternator, which produces electricity for the traction motors, putting the train on move. A steam engine (coal) powered train.

How many liters of diesel does a locomotive use?

The amount of Diesel being taken by a locomotive depends on the load that the engine is pulling: If it is pulling only it’s own weight then it is 0.56 km/litre. With load of about 5000 tons, this loco will consume 4 liters / km. Normal cruising at about 90kmph, mileage of 400 litres of Diesel per 100 kms. Idling at 25 Lit. per hour.

How much electricity does a diesel train use?

And comparing a specific diesel train (though you do not specify the number of coaches) with a generic “electric one” seems to suggest you think a Class 323 is going to use the same amount of electricity as an 11-car Pendolino or a Class 91 and rake of 9 Mk4 coaches plus DVT? It is stated here that an HST uses about 4.6 L of diesel fuel per km.

How much Diesel does a truck use per kilometer?

For instance, larger engines will use more fuel than smaller engines. Also, larger vehicles, like 18-wheelers and large commercial trucks will use more fuel per kilometer than smaller trucks and vans might use. On average, however, larger trucks can typically use between 35 and 50 Litres of diesel per ever 100 kilometers.

How much Diesel does a HST train use?

It is stated here that an HST uses about 4.6 L of diesel fuel per km. That’s 7.4 L per mile which would cost about £9 at your local filling station, though I expect that’s not quite the same sort of diesel trains use.

What is the fuel efficiency of a train?

A modern electric train with 200 passengers uses 10 kWh per mile, so you can go 4 miles per gallon of gas (equivalent). Per person, it is (10 kWh/200 passengers) 0,05 kWh per mile, or 800 miles per gallon of gas.

What kind of fuel do trains run on?

  • until
  • Diesel-Electric Power.
  • Gas-Turbine Power.
  • Electric Power.

    What is the fuel consumption of a locomotive?

    A typical ALCo locomotive WDM3D consumes about 3 litres of diesel at startup and for idle mode (just running at lowest possible RPM without any load) it consumes 27 liters of diesel per hour.

    How much does a diesel locomotive weigh?

    A Locomotive engine is a 2-stroke diesel and weighs 30,000 lbs (just the motor). The locomotive diesel is used only to generate electric DC voltage which drives the truck (wheel) DC motors. It runs at top end RPM’s continuously for decades and generates 3,200 hp non-stop all the time. A train engine is very impressive.

Author Image
Ruth Doyle