How many quarts of oil does a Dodge Ram 2500 v10 take?
How many quarts of oil does a Dodge Ram 2500 v10 take?
Dodge 8.0L Magnum V10 Specs
| Engine: | Dodge 8.0L Magnum V-10 |
|---|---|
| Fuel Requirements: | Regular 87 octane unleaded gasoline |
| Oil Capacity: | 7.0 U.S. quarts w/ filter change |
| Peak Horsepower: | 300 hp @ 4,100 rpm (1994 – 1998 model years) 310 hp @ 4,100 rpm (1999 + model years) |
| Peak Torque: | 450 lb-ft @ 2,400 rpm |
What oil does a Dodge v10 take?
Mobil Full Synthetic; SAE 5W-30; 1 Quart (Manufacturer Rebate Available!)
How many quarts does a Ram 2500 take?
7 quarts
Capacity: 7 quarts (with filter)After refill check oil level.
What oil does a 2019 Cummins take?
Factory fill is synthetic. The 2019 RAM diesel manual (Page 104) shows that 5W 40 is recommended for all temps, and required below 0F. From the RAM manual “CAUTION! Failure to use SAE 5W-40 synthetic engine oil in ambient temperatures below 0°F (-18°C) could result in severe engine damage.”
How many quarts of oil does a Cummins 6.7 take?
12 quarts
Many vehicles use a 6.7 Cummins, with most requiring 12 quarts for a complete oil change. For top-ups, it depends on your vehicle’s condition and the oil you’re using. Cummins are known for consuming a lot of oil, especially the older models.
How much oil does a 2020 Ram Cummins hold?
Fill engine with 11.5 quarts of new engine oil with oil fill funnel and reinstall oil fill cap.
What kind of engine oil does a Dodge Ram use?
RED LINE Full Synthetic 5W-30 is fully compatible with other conventional and synthetic engine oils. First class engine oil, the highest quality engine oil on the market and the most popular viscosity on the market. Designed for maximum protection, efficiency, cleanliness and excellent drain intervals. Excellent wear protection & friction reduction
How much fluid is in a Dodge Magnum?
48RE 4-Speed Automatic Service Fill 3.80 8.00 Cooling System Fluid Liters Quarts 48RE 4-Speed Automatic O-haul Fill (5) 14.00 -16.00 29.00 – 33.00 3.7L Magnum V6 (2) 15.40 16.20 45RFE & 545 RFE 5-Speed Automatic
How much water is in a ram fluid?
Ram Fluid Capacities (1) Includes 0.9L (1.0 quarts) for coolant reservoir. (2) If equipped with Trac-lok add 0.25 pints (118mL) of Limited Slip Additive. (3) Dry fill capacity depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary.
What are the specs of a Dodge Ram?
A few specs for the 8.0L V10 Magnum engine include: Engine Dodge 8.0 Magnum V10 Valvetrain Pushrod OHV Oil Capacity 7.0 quarts Horsepower 300-310 HP Torque
48RE 4-Speed Automatic Service Fill 3.80 8.00 Cooling System Fluid Liters Quarts 48RE 4-Speed Automatic O-haul Fill (5) 14.00 -16.00 29.00 – 33.00 3.7L Magnum V6 (2) 15.40 16.20 45RFE & 545 RFE 5-Speed Automatic
Ram Fluid Capacities (1) Includes 0.9L (1.0 quarts) for coolant reservoir. (2) If equipped with Trac-lok add 0.25 pints (118mL) of Limited Slip Additive. (3) Dry fill capacity depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary.
What kind of lubricant does a Dodge Ram use?
ATF+4. The reason it doesnt take gear fluid is because if the seal between the transmission and transfer case starts to leak, the transmission wouldnt get contaminated by gear fluid, but instead ATF+4. 75W-140 Synthetic gear lubricant for heavy duty or trailer towing intended uses.
Is the Dodge Ram 8.0 Liter V10 reliable?
Ram V10 reliability is a tough one. It’s not hard to say the 8.0 liter V10 is reliable. However, it has tough competition going up against the 5.9 6BT Cummins engine which is widely regarded as one of the most reliable passenger diesel engines of all time.
