How does a PCV system work in a v-237 engine?
How does a PCV system work in a v-237 engine?
At this point, you simply push the PCV Valve in and this step is complete. The Valve is Standard Brand V-237 and we are using 3/8″ PCV/Fuel Line hose. I needed about 4 feet. The concept is to connect the PCV Valve via the hose to the intake manifold’s vacuum inlet on the other side of the engine. How you go about doing this is up to you.
How many PCV valves are there in a car?
34JULY 2015 engine professional It isn’t uncommon to see 50 or more PCV valves on the shelf of any auto parts store. Each one has unique flow characteristics and vacuum transition points, and is designed to work with the vacuum and blowby requirements of a certain group of engines.
Is there a vacuum line in the engine?
Symptoms include high idle while running down the road, 40mph and release gas pedal and truck very slowly lowers in speed unless brakes depressed then it slows the engine idle down. examination shows a vacuum line port with no hose and I cannot determine what (if anything) should be in there?
Where is the PCV hose on a 5.7 liter engine?
the pcv hose on the driver side of the 5.7 liter engine connects from the valve cover to the intake manifold. There is another smaller vacuum line that comes from this connection at the intake manifold.
Where to put the PCV valve on a carb?
If you have a manifold port available that is convenient to the PCV location on the valve cover, use that one. If not, use whatever port that is most convenient to the PCV valve and requires the least amount of plumbing.
Where is the PCV valve on a Camaro?
The car is 78 z28 camaro with 350 engine and 650 holley carb. My question is about the PCV valve connection. The valve is working properly one way going out from the valve cover. it is located on the passenger side and the breather is on the driver side.
the pcv hose on the driver side of the 5.7 liter engine connects from the valve cover to the intake manifold. There is another smaller vacuum line that comes from this connection at the intake manifold.
Symptoms include high idle while running down the road, 40mph and release gas pedal and truck very slowly lowers in speed unless brakes depressed then it slows the engine idle down. examination shows a vacuum line port with no hose and I cannot determine what (if anything) should be in there?