How do you reset the fuel pump inertia switch?

How do you reset the fuel pump inertia switch?

Resetting the fuel pump inertia switch simply involves pushing down on the button located on top of the inertia switch till it bottoms out. The following fuel pressure test gauge kits are pretty good deals: The following fuel pumps are pretty good deals:

How to test the fuel pump in a 1990 Ford?

Part 2 -How to Test the Fuel Pump (1990-1997 2.3L Ford). Connecting a fuel pressure gauge, to test fuel pressure, is possible due to the Schrader valve on the fuel injector rail.

What causes a 2.3L Ford Ranger to not start?

CASE 1: If the fuel pressure gauge registered 0 PSI. This confirms that the cause of your 2.3L Ford Ranger’s no start problem is caused by a lack of fuel. Now, I usually take one more precaution, before condemning the fuel pump as bad and this is to check that the fuel pump is getting 12 Volts as the engine is cranking.

How do you reset the fuel gauge on a car?

If this happens, reset your fuel gauge. Each make and model of car has its own specific instructions on how to reset the fuel gauge, but the process is basically the same. Turn the ignition switch to the “On” position. Press the “Odo/Trip” button until the odometer is put into “ODO” mode. Turn off the ignition.

How do you change the fuel pump in a Ford Ranger?

Lifting the bed is the easy way to change the pump: there is one caveat. If the tank is dirty you need to drop the tank and clean it out the old fashioned way. 1. Remove the fuel pressure relay and depressurize the system 2. Remove tailgate 6. TEAM LIFT bed off 7. Remove fuel pump fittings 8. Replace pump

How do you change a bad fuel pump?

I lift the bed and change out the fuel pump that tested bad in a previous video. Lifting the bed is the easy way to change the pump: there is one caveat. If the tank is dirty you need to drop the tank and clean it out the old fashioned way. 1. Remove the fuel pressure relay and depressurize the system 2. Remove tailgate 6. TEAM LIFT bed off 7.

What causes a Ford fuel pump to shut off?

If your Ford ever fails to start or stalls on you suddenly, the first thing to check is the inertia fuel shut-off switch. The switch is designed to trip and cut power to the fuel pump in the event of a collision, but you can also trigger it by hitting a large bump or pothole as well.

Is it safe to run a Ranger with an empty gas tank?

Drivers who routinely operate their Rangers with near empty fuel tanks increase the risk of premature fuel pump failure. While there are other causes for premature pump failure, it’s always a good idea to keep your Ranger’s gas tank at least a quarter full.