How do you replace brake drum on Chevy Malibu?
How do you replace brake drum on Chevy Malibu?
Reattach the long springs by levering them onto the shoe hooks with the screwdriver, or using a screwdriver-like brake tool (notch at tip). Replace the drum with a new or resurfaced unit by pressing it over the shoes until it reaches the backing plate.
How often do you change the brakes on a Chevy Malibu?
Most Chevrolet Malibu automobiles were manufactured with a rear drum braking system, which can wear out and require replacement. The drums and shoes comprise the friction surface that stops the car, and these are regular maintenance items designed to be changed out every 40,000 to 60,000 miles.
How do you remove rear wheel cylinder on Chevy Malibu?
While pulling the cylinder away from the knuckle, alternate loosening each star screw from side to side. The idea, is that instead of backing the screws all the way out of the backing plate, the screw heads stay flush with the backing plate while you pull the cylinder away from the front of the plate. Seems like that would work.
How to remove a brake drum that is stuck on?
Watch how to remove a brake drum that is stuck on. I go through the steps so anyone can remove their drum brake. In this case the drum adjuster was stuck so first try to get it off by wiggling back and forth. Then spray penetrating oil to remove rust between the drum and the seat. Then hit it with a hammer hard.
While pulling the cylinder away from the knuckle, alternate loosening each star screw from side to side. The idea, is that instead of backing the screws all the way out of the backing plate, the screw heads stay flush with the backing plate while you pull the cylinder away from the front of the plate. Seems like that would work.
Watch how to remove a brake drum that is stuck on. I go through the steps so anyone can remove their drum brake. In this case the drum adjuster was stuck so first try to get it off by wiggling back and forth. Then spray penetrating oil to remove rust between the drum and the seat. Then hit it with a hammer hard.
What’s the best way to remove brake shoes?
Use a pair of pliers to pull back the shoes’ return springs. Next, use a brake spring tool to remove the hold-down pins and springs. At this point, some brake shoes will be able to be removed. If not, you may need to use a screwdriver to disconnect the brake cable.
How is a brake drum puller attached to a wheel?
Place each of the brake drum puller’s 3 hooks evenly around the brake drum’s flange. Ensure that the screw in the middle of the brake drum puller lies above the middle of the wheel hub. Use a screwdriver to attach the brake drum puller’s screw tightly. Tighten the screw until the brake drum puller is securely fastened around the brake drum.
