How do you replace a rear wheel bearing?
How do you replace a rear wheel bearing?
To remove bearing bend up the locknut stake and remove axle nut – torque is between 159 – 217 ft pounds. Now remove the hub, retaining ring, rear wheel knuckle, wheel bearing (if loose), dust cover. Replace with new parts, locknut, dust cover, knuckle bushings and hub bolts (if worn). Assembly is reverse of the above.
What are the rear axle bearings on a Ford F-150?
Rear axle wheel bearings are a part of the F-150’s suspension. The bearings allow the wheels to rotate while supporting the vehicle’s weight.
How to replace the rear hub bearing on a Ford Explorer?
Loosen the lug nuts from the wheel which the bearing is going to be replaced. Step 2: Raise and secure the vehicle. Raise the vehicle and secure it on jack stands, and then remove the wheel. Place blocks of wood underneath the front and rear of the wheel diagonally opposed from the one you will be working on.
How to replace a rear wheel bearing on a Ford Falcon?
Check for rear hub play with a dial indicator, if excessive play either tighten the locknut or remove hub and replace bearing. To remove bearing bend up the locknut stake and remove axle nut – torque is between 159 – 217 ft pounds. Now remove the hub, retaining ring, rear wheel knuckle, wheel bearing (if loose), dust cover.
Loosen the lug nuts from the wheel which the bearing is going to be replaced. Step 2: Raise and secure the vehicle. Raise the vehicle and secure it on jack stands, and then remove the wheel. Place blocks of wood underneath the front and rear of the wheel diagonally opposed from the one you will be working on.
Rear axle wheel bearings are a part of the F-150’s suspension. The bearings allow the wheels to rotate while supporting the vehicle’s weight.
How do you remove a rear axle bearing?
Pull the bar out and forward to pop the seal off. Insert the end of the axle bearing puller hook behind the bearing. Tighten up the nut of the axle bearing puller. Hit it with the slide hammer until the bearing comes out. Check the interior of the bearing to make sure that no bearing roller balls have remained inside of it.
How to replace a rear wheel bearing in a Ford Ranger?
Watch the video and see. The only thing they left out was removing the rear end cover and remove the “C” clips on the end of the axle so you can pull them out. A pair of needle nose pliers come in handy.. 2011 Ranger XLT 2×4,4.0 SOHC, 5 Speed Auto, 3.55 Rear.
