How do you program a 2010 key fob?

INSERT key into Ignition and TURN from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm Programming Mode. Within 20 seconds press any button on first keyless remote fob. Door locks will cycle to confirm programming.

How to program a Chevrolet Silverado remote key fob 2007?

An easy to follow video on how to program a remote key fob for a 2007 – 2010 Chevrolet Silverado. 1. Insert Key and turn to ON position so you can access Driver Information Center 2. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY displays 3. Press the set/reset button until REMOTE KEY LEARNING ACTIVE displays 4.

Why is my Remote key fob not programming?

There is a footnote on Step #4 that states if the locks cycle before you release the unlock button the programming will not work because you are not in the programming mode. It suggests that you repeat steps 1-4, and if this doesn’t work you probably have a problem with the vehicles keyless entry system.

What to do when your car key fob is not working?

Once the above steps are performed, turn the ignition back to the ‘Off’ position to terminate the programming procedure. Take your key fobs with you and leave the vehicle and close all doors. Test to both unlocks with all your key fobs that got programmed to verify the function.

How to enter keyless entry in Chevy Silverado?

INSERT key into Ignition and TURN the Ignition to ON/ACC (just shy of cranking engine). PRESS and HOLD the DISP button on the Radio for 5-10 seconds UNTIL settings are displayed. PRESS the SEEK up or down arrows UNTIL “FOB PROG” appears on the display. PRESS the PREV or NEXT buttons to enter the sub menu. The menu will display BEGIN.

How to program the Chevy Silverado key fob remote?

Step 7: Exit programming mode by starting your Silverado. Turn off the vehicle and test your remotes. Step 1: Sit in the vehicle with all the doors closed and unlocked. Start your Silverado and leave it in Park.

Do you need a fob for a Chevy Silverado?

A keyless entry remotes makes our lives easier by locking and unlocking the Silverado from up to 40 feet away. If you’ve purchased an additional remote, also known as a fob, you’ll need to program it to sync with your truck.

How to program Chevy Gm key with no keys programmed?

The programming of any of these Gm keys is relatively easy and most of them can be programmed yourself DIY. If you have at least 1 working key…. If all keys are lost…. Then you must perform what we call the 10x10x10 procedure: Insert new key and turn on (do not start!)

How to program the remote fob on a Chevy Impala?

INSERT key and TURN the ignition to ON (just shy of starting vehicle without cranking engine). PRESS vehicle information button until “PRESS TO RELEARN REMOTE KEY” is displayed. PRESS the Set/Reset Button (Button will have a checkmark) until “REMOTE KEY LEARNING ACTIVE” is displayed. Vehicle is now in Programming Mode.