How do you find the Flash code on a Ford airbag?

When an error occurs, your warning light may flash a code, made up of a flash sequence, a pause, then another sequence. Count the flashes in each sequence and use the flash code to find the associated cause below. For example, four flashes then nine gives a flash code of 49.

What does it mean when your air bag flashes?

The flashing means that there is a fault with the system. You can read the number of flashes and it will give you a code (codes listed below for ford ranger and Mazda B3000).

What’s the code on the airbag dash light?

Count the flashes on the airbag dash light. Each code is two digits and is counted by quick flashes and pauses. So a flash, flash, pause, flash equates to a code 21 on the fault code chart. Clear the codes with a jumper wire or by a specific brand scanner.

How does the airbag warning light work on a Ford?

by Alexander Poirier. When there is a problem with a Ford’s airbag, the airbag warning light will illuminate and flash a code that identifies the problem. Because airbag problems range from a lost battery feed to a shorted circuit, it is important to understand the codes so that the airbag can be properly repaired.

Why does my airbag warning light keep flashing?

A flashing airbag light can mean one of two things. The first possibility is that your battery is in death throes. Have it tested at your local auto parts store. The second possibility is that there is an actual problem with the airbag system. Below is a list of airbag codes, which will flash on the warning light.

What does the code 32 on the airbag light mean?

Code 32 (triple flash, pause, two flashes) means the driver side airbag has a circuit open or with high resistance, Code 33 (triple flash, pause, two flashes) means the passenger side airbag has a circuit open or with high resistance, Code 34 (triple flash, pause, four flashes) means the driver side airbag has a shorted circuit or one with low

How does the air bag light code work?

These codes are started by a single flash of the indicator light, followed by a two-second pause. After the pause, the light will flash the number of times that corresponds to the second digit of the code.

What is the DTC Flash code for an air bag?

Lamp flash code: 34 1.24 DTC B2292 Error value 24: Passenger safety belt pretensioner short to ground. Lamp flash code: 34 1.25 DTC B2293 Error value 31: Driver air bag first stage short to ground. Lamp flash code: 19 1.26 DTC B2293 Error value 30: Driver air bag first stage short to battery. Lamp flash code: 19

What is the Flash code on a lamp?

Lamp flash code: 42 1.63 DTC B2434: Driver safety belt buckle switch short circuit to ground. Lamp flash code: 51 1.64 DTC B2435: Driver safety belt buckle switch resistance out of range. Lamp flash code: 51 1.65 DTC B2438: Passenger safety belt buckle switch short circuit to ground.

What does code 52 mean on Ford airbag?

The code should then clear. Code 52 just means that the battery voltage to the airbag curcit has been interupted. if it flashs code 12 this is a hard fault and you will probably find the fuse blown.

Where is the code on the airbag light?

On the data link connector there is a airbag code clear pin. after the ignition is turned on and the airbag light has flashed the code you gound the pin and the cluster will beep 5 times. The code should then clear.

What does Code 51 mean on Ford airbag?

Code 51 (five flashes, pause, one flash) means the airbag diagnostic monitor’s internal fuse is blown, Code 52 (five flashes, pause, two flashes) means the back-up power supply has had a voltage boost fault and Code 53 (five flashes, pause, three flashes) means the front crash sensor has high resistance or the diagnostic monitor has failed.

What is the code for the airbag light?

Code 21 (double flash, pause, one flash) means the diagnostic monitor is not mounted properly.

Why does my Ford airbag light keep flashing?

FORD AIRBAG This video will show you how to diagnose or retrieve the ford airbag trouble codes from the Ford airbag system. If your Airbag light on or airbag light flashing. When you retrieve the ford airbag codes than you can know why is your airbag light on.

What is the Flash code on a Ford air bag?

Lamp flash code: 13 1.3 DTC B1317: Battery voltage high. Lamp flash code: continuous 1.4 DTC B1318: Battery voltage low. Lamp flash code: continuous 1.5 DTC B1342: Air bag control module is defective. Lamp flash code: 12 1.6 DTC B1869: Air bag warning indicator open circuit or short to ground.

Why is my air bag light flashing code 34?

Code 34 is for DRIVER SIDE AIR BAG CIRCUIT LOW RESISTANCE OR SHORTED. The most common problem we have seen is the clock spring that connects the drivers side steering wheel air bag to the harness in the steering column. Replace the clock spring and the code 34 will be cleared. Below is a picture of the clock spring. Sounds likely to me.

How do you find the Flash code on a Ford airbag?