How do you clear the codes on a 2014 Dodge Ram 1500?

How do you clear the codes on a 2014 Dodge Ram 1500?

How To Reset the Check Engine Light on a RAM 1500

1. Find your battery under the hood and disconnect the black/negative cable.
2. Wait 20 minutes for the power reserve to expire. The RAM 1500 check engine light should reset automatically during this time.
3. Now, just reconnect the black/negative cable.

How do I reset my 2014 Dodge Ram?

1st Way:

1. With the key out of the ignition.
2. Disconnect the Negative battery Cable.
3. Put the key in the ignition and turn it as if you where trying to the START it.
4. Release the key and leave it in the “ON” position and let it sit for 10- 15 min.
5. Remove key from the ignition.

Where is the fuel filter on a 2014 Ram 1500?

The 2014 Dodge Ram 1500 has a fuel filter that can be found on the inside of the gas tank. The filter is mounted to the inside of the tank, encased by the filter assembly.

How to reset oil service light Ram 1500?

Reset oil service light RAM 1500, year 2014. Turn the ignition to run (one position before starting engine). Press and release the DOWN arrow button to scroll downward through the main menu to “Vehicle Info”. Press and release the RIGHT arrow button to access the ”Oil Life” screen. Press and release the DOWN arrow button to select “Reset”,…

How to reset the oil change due message?

Dodge Ram Pickup Oil Change Due Indicator Reset. 1 STEP 3. Push the start button to RUN Position (Ignition On) Don’t start the engine. 2 STEP 4. 3 STEP 5.

How to reset oil service light to 100%?

Press and release the DOWN arrow button to select “Reset”, then press and release the Right arrow button to select reset of the Oil Life to 100%. Press and release the Up arrow button to exit the EVIC screen. Turn the ignition off and then start the engine to veirfy the indicator has been reset. . You must be logged in to post a comment.

How do you reset a Dodge Ram truck?

Push the start button to RUN Position (Ignition On) Don’t start the engine. Fully depress the GAS PEDAL slowly three times within 10 seconds Make sure to depress the pedal all the way down.

What oil does a Dodge Ram 1500 use?

5w20 oil is recommended for all of the 2007 year model 1500 engines. For the 5.7L HEMI it is mandatory to use 5w20 oil as different oil can set the check engine light and can cause issue with the multiple displacement system that disables four cylinders at cruising speed for more efficient fuel mileage.

How do you turn off the change oil light?

Watch for the change oil light to flash. If it does not flash and remains on, turn the ignition key to the off position and then retry the procedure. After the change oil light flashes, it should go out. If the change oil remains on for five seconds (depending on the year and model Chevy), it may not have reset.

How do you reset oil change indicator?

Hold the button down until the “Oil” icon or word starts to flash, or the indicator lights show some other sign of resetting. Some cars will flash the word “Reset,” or display the numeral “100” to show that 100 percent of oil life remains after the oil change. Turn the ignition off, wait a few moments, and then start the engine.