How do you change the thermostat on a Chevy Venture?

Fortunately, replacing the thermostat on your Venture model is an easy process. Place a catch pan under the drain valve of your Venture radiator. Open the radiator valve and drain at least 2 quarts of coolant. Then close the drain valve. Remove the air cleaner and duct assembly from the top of the engine to gain access to the thermostat housing.

How does the Chevy Venture Van cooling system work?

The cooling system of your Chevy Venture van uses a simple thermostat to regulate and maintain engine temperature. The thermostat allows the exchange of high and low temperature coolant between the engine and radiator. However, the thermostat components may wear down over time and stop operating.

How do you remove a clamp from a venture thermostat?

Use a pair of rib joint pliers to loosen the clamp, and then slip it off the thermostat housing towards the radiator. Other Venture models may use a worm clamp type, which you can remove using a standard screwdriver or ratchet and socket.

How can I drain coolant from my venture radiator?

Place a catch pan under the drain valve of your Venture radiator. Open the radiator valve and drain at least 2 quarts of coolant. Then close the drain valve. Remove the air cleaner and duct assembly from the top of the engine to gain access to the thermostat housing. Use a screwdriver and a ratchet and socket if necessary.

How do you remove a thermostat from a car?

Unscrew the two mounting bolts from the thermostat housing using a ratchet, ratchet extension and socket. Detach the thermostat housing from the engine. Note the exact position of the thermostat so that you install the new one the same way. Then remove the thermostat and gasket.

Where is the temp sensor on a Chevy Venture?

Some thermostats can be put in upside down, so pay attention to the arrows on the thermostat. The water should flow from the engine towards the radiator. The temp sensor I think is in the rear passenger side of the engine on top.

It will require draining the coolant from the radiator, the removing the thermostat housing, usually two bolts. Some thermostats can be put in upside down, so pay attention to the arrows on the thermostat. The water should flow from the engine towards the radiator.

How to reset Transmission Control Module Chevy [ updated ]?

Now all you have to do is press the accelerator pedal. Be sure to press it down. Press the accelerator pedal all the way down in order to activate the kick-down switch. Activating the Kick-Down switch is all you need. Keep pressing the foot pedal, and continue to the next step.

How do you change the thermostat in a car?

Have someone with a temperature gauge gun shoot the car and see if there are any hot spots in the area of the thermostat. The thermostat is cheap to replace, time is the only thing. It will require draining the coolant from the radiator, the removing the thermostat housing, usually two bolts.

Why is my Chevy Dorman thermostat not working?

Maybe the car doesn’t like the new Dorman thermostat. If I do that, everything except the housing will be Chevy or AC Delco again. A mechanic suggested I replace the thermostat because of the age and the fact that I needed to replace the housing, maybe that has been my downfall.

What happens if the thermostat on my car stops working?

However, the thermostat components may wear down over time and stop operating. This will cause the engine to operate over or under the recommended temperature, which may cause major damage and costly repairs. Fortunately, replacing the thermostat on your Venture model is an easy process.

How do you set a new thermostat in place?

Apply a light coat of room temperature vulcanizing (RTV) sealer to the threads of the thermostat housing bolts. Set the new thermostat and new gasket in place. Set the thermostat housing in place and start the two mounting bolts by hand. Then tighten the bolts using the ratchet, ratchet extension and socket.

Why is the thermostat on my Chevy Van stuck open?

If your Chevy van is having temperature problems, the thermostat could be the cause. If the thermostat is stuck open, the engine will take a long time to warm up. If the engine overheats, it can be because the thermostat is stuck closed; if this is the case, the engine will be hot, but the upper radiator hose won’t be.

How to change the thermostat on a Chevy Impala?

2000 2001 2002 2003 2004 2005 Chevrolet Impala Thermostat change. The car ran hot while just sitting from the start up. This wasn’t a intermittent problem, as soon as the car started it was on its way to overheat. Changed the thermostat and everything is now fine I only used a 1/4 ratchet set and a 13mm wrench. Loading…

Who is the vice president of 98 ventures?

Started with 98 Ventures as Controller. Built our current financial infrastructure from the ground up while fortifying a team to safeguard that infrastructure for years to come. Today, he serves 98 Ventures as Vice President of Finance. Started with 98 Ventures as Director of Human Resources.