How do you change the alternator on a Stratus?
How do you change the alternator on a Stratus?
No matter which engine package or alternator your Stratus has, the process of changing the alternator is the same. Remove both battery cables from the battery, using the correct wrench to turn the nuts on the terminals counterclockwise. Use the battery terminal and post cleaner to clean the cable ends and the battery posts thoroughly.
How do you remove an alternator from a 2.5 liter engine?
On the four-cylinder engines, pry the alternator away from the engine using the pry bar, tighten the adjuster and pivot bolts. On the 2.5-liter engine, tighten the adjuster and pivot bolts, then the tensioner bolt until the belt will only twist 1/4 to 1/3 of the way around.
What kind of engine does a Dodge Stratus have?
The 2000 Stratus was Dodge’s entry into the mid-size sedan class. The interior is roomy, thanks to Dodge’s “cab-forward” design. The Stratus was available with three different engines in 2000. The entry-level SE had either a 2.0 liter or a 2.4-liter, four-cylinder engine, while the upscale ES came equipped with a 2.5-liter V-6 engine.
How do you loosen the pivot on an alternator?
Loosen the pivot and adjuster bolts on the alternator — the adjuster or tensioner on the 2.5-liter engine — by turning the bolts counterclockwise with a socket and ratchet. Mark the outside edge of the alternator belt with the chalk.
No matter which engine package or alternator your Stratus has, the process of changing the alternator is the same. Remove both battery cables from the battery, using the correct wrench to turn the nuts on the terminals counterclockwise. Use the battery terminal and post cleaner to clean the cable ends and the battery posts thoroughly.
How do you install an alternator on a four cylinder car?
Install the new alternator, the pivot and adjuster bolts. Install the alternator belt, ensuring the chalk line is on the outer edge. On the four-cylinder engines, pry the alternator away from the engine using the pry bar, tighten the adjuster and pivot bolts.
The 2000 Stratus was Dodge’s entry into the mid-size sedan class. The interior is roomy, thanks to Dodge’s “cab-forward” design. The Stratus was available with three different engines in 2000. The entry-level SE had either a 2.0 liter or a 2.4-liter, four-cylinder engine, while the upscale ES came equipped with a 2.5-liter V-6 engine.
Loosen the pivot and adjuster bolts on the alternator — the adjuster or tensioner on the 2.5-liter engine — by turning the bolts counterclockwise with a socket and ratchet. Mark the outside edge of the alternator belt with the chalk.
On the four-cylinder engines, pry the alternator away from the engine using the pry bar, tighten the adjuster and pivot bolts. On the 2.5-liter engine, tighten the adjuster and pivot bolts, then the tensioner bolt until the belt will only twist 1/4 to 1/3 of the way around.
When is it time to replace your alternator?
Your alternator needs to know when each one of those things is plugged in and turned on, so that it can increase power. More importantly, just like with your breathing, your alternator needs to know when to put out less power.
How do you install a new alternator in a car?
Installing the New Alternator Slide the new alternator into place. You might have to wiggle the alternator around to squeeze it back into place in a crowded engine bay. Insert the mounting bolts. Slide the mounting bolts through the alternator and into the mounting bracket. Run the belt over the new alternator pulley.
What causes an alternator to wear down over time?
Over time, there are several components in the alternator that naturally wear down. In my experience, it’s either the brushes (magnets) or the voltage regulator that break down the soonest. With the brushes, it’s not very complicated.
How to replace the alternator on a Dodge Stratus?
Directions to Replace the Alternator on a 2000 Dodge Stratus. 1 Step 1. Remove both battery cables from the battery, using the correct wrench to turn the nuts on the terminals counterclockwise. Use the battery 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5.
How do you remove an alternator from a car?
Remove the pivot and adjusting bolts and lift the alternator out. On cars equipped with cruise control, remove the vacuum line from the speed control module and remove the two mounting bolts with a socket and ratchet. Move the module out of the way. Install the new alternator, the pivot and adjuster bolts.
How do you install an alternator on a 2.5 liter engine?
Install the alternator belt, ensuring the chalk line is on the outer edge. On the four-cylinder engines, pry the alternator away from the engine using the pry bar, tighten the adjuster and pivot bolts. On the 2.5-liter engine, tighten the adjuster and pivot bolts, then the tensioner bolt until the belt will only twist 1/4 to 1/3 of the way around.
