How do I unlock my GM TheftLock radio?

Unlocking your Theftlock radio will require you to enter a unique 4-digit numerical code. Before you can do this, however, it will be necessary to write down two separate 3-digit numbers, which you’ll get by punching a series of buttons on the radio’s interface.

How does the TheftLock RDS radio system work?

About the theftlock RDS radio system . The theft deterrent system now utilizes class 2 serial data to determine if the radio is in the authorized vehicle.

What causes a GM radio to lock up?

Take your car to a qualified GM mechanic or car radio technician to have them diagnose the source of the problem. GM Theftlock radios are designed to lock up automatically when the vehicle’s battery dies or becomes disconnected, though an electronic malfunction could also cause the Theftlock function to activate.

What to do if your car radio is locked?

Start your vehicle like normal, or turn the key until it’s in the “On” or “Accessory” position. Then, press the power button on the radio’s volume dial to turn on the radio. The digital display will read “LOC” if the radio is locked.

Where can I find the TheftLock radio code?

You will find the “TheftLock” radio code feature on most Pontiac, Cadillac, GMC, Chevrolet, Saturn, Geo, Oldsmobile, Hummer and Buick vehicles.

How do you unlock the radio on a GM car?

To unlock radio you will need access to a GM scan tool. The radio must be in LOC mode NOT in INOP mode. Turn the ignition ON (The radio displays LOC). Press and hold presets buttons 2 & 3 or 1 & 4 for approximately 10 seconds. The radio display changes from LOC to a three-digit number. Write this number down.

What happens when you fail to enter your radio code?

If you have activated the Theft-Deterrent feature of your radio and loose power, the radio goes into LOC (theftlock) mode. With the ignition on, you must use the MN and HR buttons to enter your personal code in order to unlock it. If you fail to enter the correct code eight (8) times, the radio goes into INOP mode.

What does it mean when your car radio says locked?

If a match does not occur, the radio display will indicate “locked”. Once this occurs the radio will not respond to operations and become inoperative. The following conditions will enable radio lock: A radio is installed from another vehicle.

Where can I get the radio unlocked on a Chevy?

You can go to a Chevrolet dealership to have your radio unlocked, but some dealers can charge high fees to unlock the radio. Even if they unlock your radio for you, they may not give you the radio code to use in the event of future radio lockouts. Theftlock radios have evolved over time but are still used in some vehicles currently.

How to unlock a Chevy TheftLock Radio Part 3?

Part 3 of 4: Obtain the radio unlock code 1 ) sign. 2 Enter the radio serial number. You will be prompted to enter the radio serial number you have just obtained. 3 Write down the radio unlock code. The prompt will read out your four-digit radio unlock code. Write it down precisely.

How can I get the radio unlocked on my car?

To get the four-digit unlock code, you must find the serial number of your car’s radio first. This can be obtained straight from your radio. Step 1: If your radio doesn’t have the “RDS” code, insert the key on the ignition and turn it to “Accessory” or “On” mode. Step 2: Turn the radio on.

Do you need a code to unlock your car stereo?

If you own a vehicle, you may find that the audio systems are equipped with an Anti-theft or radio code feature that requires a special “security code” to unlock your radio. This radio unlock code is not required for normal operations. It’s purpose is to deter a potential thief from removing the stereo.

Is there a theft lock on a GMC radio?

Both Chevrolet and GMC cars are equipped with Theftlock radios, which make stereo unsuitable for potential thieves. The disadvantage of the Theftlock system is that if the battery runs out or is disconnected, you must enter the radio code to turn off the Theftlock system.

What to do if you buy a radio without a VIN?

If not then the radio will not power up. When a person buys a radio without the code, they will take the radio, vehicle and receipt for the radio to the dealer where the service or parts det can retrieve the code. At this time they will delete the original VIN and apply the new VIN to the system.

Where is the anti theft code on a Honda Accord?

Many Honda models will have the radio code listed on a small white sticker inside the glovebox. The five or six digit code will be labeled “Anti-Theft Radio Code.” Enter this code through the preset radio buttons on your radio. You will hear a beep and then the radio will resume normal function.

Is it possible to get a GM radio code?

Most GM dealerships will try to charge you a lot of money for a radio retrieval code, but it’s possible to get it yourself in a just a few short minutes, provided you know the dealer code associated with your vehicle’s radio.

Is it possible to unlock a GM RDS radio?

Tip: If the letters “RDS” appear on the display, it won’t be possible to unlock your radio yourself, as GM doesn’t offer retrieval codes for RDS radio units. In this case, you’ll need to visit a licensed GM dealership to have them reset your radio manually.

What happens if your car stereo is stolen?

If the factory car stereo is stolen from the vehicle, the radio becomes inoperable without the radio code. Operating the unit will require a “secret stereo unlock code” known only by the owner. Experienced a dead battery. Disconnected the factory radio harness. Disconnected the battery to the vehicle.

Can You Find Your factory car radio code?

Experienced a dead battery. Disconnected the factory radio harness. Disconnected the battery to the vehicle. Click on your vehicle below to retrieve code now! Orders are processed 7days a week.

How do you find the anti theft code on a Jeep Wrangler?

1. Call 1-800-448-0944 2. Request anti-theft code. 3. State dealer code. 4. State radio serial number. 5. State VIN 6. The 4-digit anti-theft code will be provided. Eastern Time Monday through Friday. 1. Ignition in the run position. 2. Press the ON/VOL control.

How long does it take to get a radio code for a Dodge?

Step 3 – Purchase code You will receive your radio unlock code, via email. Approximate code retrieval time is 30 minutes to 24 hours. After receiving requested information. Dodge – Chrysler – Jeep Radio code retrieval

Is there a way to unlock a Pontiac radio?

This solution is an express one so you will forget that you ever had a trouble with the unlock code for your Pontiac radio. So the Pontiac radio code generator is now the first choice of many people around the world. Not only that, but it is the favorite tool of the Pontiac radio service workshops as well.

What does it mean when your GM Radio is locked?

The digital display will read “LOC” if the radio is locked. If you don’t see the letters “LOC” but your radio isn’t working, the issue may lie elsewhere. Take your car to a qualified GM mechanic or car radio technician to have them diagnose the source of the problem.

How to unlock your Chevy or GMC radio without paying a fee?

Step 1: Start the vehicle and turn on the radio. Step 2: Press and hold preset numbers 2 and 3 until a three digit code appears on the radio display. Write this code down. Step 3: Press the AM/FM button. Your radio will display a second three digit code. Write the second code down. You will now have a six digit code.

What to do if your GMC radio says INOP?

If radio display reads “INOP” while the vehicle is on, too many incorrect radio codes have been entered. To remove “INOP” from your display and unlock your radio, you must leave the key in the On position for one hour. Once you’ve retrieved your radio unlock code, write it down for future use.

Where can I find the radio unlock code?

The radio serial # is U1121L1858. I like to plead with anyone that can help send the code. Pls can you unlock my car radio code. Thanks and God bless. Just replaced the battery in my 04 civic and need the code to get the radio happy again.

How to decode Jeep anti theft radio code?

Once you get the new icon just hit two left mouse clicks on it to open the Jeep anti theft radio code decoder, Finally at the end once you will finish whit entering data process just click on the main decode button!

General Motors radio unlock codes Aveo Cadillac Geo Hummer Pontiac Buick Chevrolet Corvette GMC Oldsmobile Saturn Acura Audi BMW Daewoo Dodge Chrysler Honda Hyundai Jaguar Kenwood Kia

When do you enter your radio security code?

Applies to: Most vehicles 2002 model year and older. As part of the radio’s anti-theft system, the radio disables itself when it loses power from the vehicle’s battery. If the radio display indicates “CODE” or “OFF,” then the radio security code must be entered into the radio in order for the radio to work. 01How to find your Radio Code

How do I unlock my GM TheftLock radio?