How can I replace the top of my car?
How can I replace the top of my car?
– 1 replacement top for your model of vehicle. Do some searching online – the best deal and selection we found was here: Kit will include the top, pop rivets, staples, new hold-down cables, and glue you need to do the job.
How do you replace the top on a cabrio?
The rear side panels in the Cabrio are pretty clever. There is a single screw into the body that goes into a bar that holds the whole thing in. Access the screw from the front after the seat is removed. Remove all the rubber trim around the edge of the frames.
How do you remove a shock from a suspension?
Use a socket set or a nut splitter to disengage the nut that connects the shock to the suspension, and remove it from the bolt. If there isn’t enough room to operate the splitter, you can apply penetrating solvent.
How do you change a doughnut tire backwards?
The valve stem of a doughnut tire should face outwards, away from the vehicle. If your vehicle uses acorn-style lug nuts, it is easy to put those on backwards as well. Be sure the tapered part of the nut faces the wheel when tightening it down. Tighten the nuts by hand until they are all snug. They should turn easily at first.
Where can I find step by step axle removal instructions?
You can use the social sharing buttons to the left, or copy and paste the website link: https://www.diyford.com/ford-axle-removal-complete-step-step-instructions/ The most important aspect of safety is to be aware of your surroundings and take the time to remove any dangerous or hazardous items.
How do you replace a control arm assembly?
Once positioned, slowly lower the car onto the jack stand using the floor jack. Do not fully lower the jack and keep it in the extended position. Step 1: Remove the wheel. Using the ratchet and socket, loosen the lug nuts on the wheel. Carefully remove the wheel and keep it aside. Step 2: Separate the ball joint from the hub.
– 1 replacement top for your model of vehicle. Do some searching online – the best deal and selection we found was here: Kit will include the top, pop rivets, staples, new hold-down cables, and glue you need to do the job.
What’s the best way to replace a wheel assembly?
Grab the jack, place it in the correct spot under the vehicle, and jack the car up until you can remove the jack stands. Then you can lower the vehicle back onto the ground. Step 8: Torque the wheels.
