How can I Kick on my Cat air conditioner?
How can I Kick on my Cat air conditioner?
Most A/C systems have all of the sensors hooked in a series so that when one fails or doesnt see the value that is needed, the compressor cannot kick on. Manually kick on the compressor the compressor if it will not do it on its own.
Why does my cat air conditioner get hot?
The compressor getting hot can indicate a few things, one that the condenser is not getting enough airflow to cool the refrigerant; two that the system could be over or under charged; three that the belt is not running tight. Easy things to check: make sure that the condenser is clean and you have good airflow.
What should the air velocity be in a cat air conditioner?
Easy things to check: make sure that the condenser is clean and you have good airflow. If you can measure it with an anemometer you should get at least 500 to 600 FPM of air velocity, more is better.
Why is my cat air conditioner at a pressure switch?
If it is at a pressure switch, it may mean that you are low on refrigerant. You also want to check on the ground side of the compressor circuit, since Cat sometimes puts the thermostat on the ground side of he circuit. 2) Make sure the belt is on, tight and in good condition. Slipping belts will fail a compressor quicker than anything.
Most A/C systems have all of the sensors hooked in a series so that when one fails or doesnt see the value that is needed, the compressor cannot kick on. Manually kick on the compressor the compressor if it will not do it on its own.
If it is at a pressure switch, it may mean that you are low on refrigerant. You also want to check on the ground side of the compressor circuit, since Cat sometimes puts the thermostat on the ground side of he circuit. 2) Make sure the belt is on, tight and in good condition. Slipping belts will fail a compressor quicker than anything.
Why does my cat air conditioner keep slipping?
Check the belt on the compressor – should be tight and not slipping – slipping can be caused by a loose tensioner or liquid getting onto the belt (oil, antifreeze, washer fluid, etc). Once the belt gets a glaze on it it should be replaced with a good quality raw edged belt.
Is the AC compressor on a Western Star working?
Discussion in ‘ Western Star Forum ‘ started by 04 LowMax, Jul 7, 2014 . Wondered if anyone has done any trouble shooting for this problem on a star? Was all prepared to head to a shop and get ac recharged, then thought I better just make sure the compressor is working. Good thing I did, it wasn’t. No 12 volts at comp plug.
What are the features of the cat 259B series 3?
The 259B Series 3 features the following: Ergonomic operator station features easy to use pilot operated joystick controls for reduced operator fatigue and increased productivity. High performance power trainprovides high engine horsepower and torque, allowing part-throttle operation for lower sound levels and fuel consumption.
How tall is a cat 259b compact track loader?
Cat 259B Series 3 COMPACTTRACKLOADER Specifications Dimensions* 1Length of Track on Ground 1495 mm 59 in 2Overall Length of Track 1995 mm 79 in 3Length w/o Bucket 2722 mm 107 in 4Length w/Bucket on Ground 3432 mm 135 in 5Height to Top of Cab 1986 mm 78 in 6Maximum Overall Height 3872 mm 152 in 7Bucket Pin Height at Maximum Lift 3046 mm 120 in
