Other

How big are the brake drums on a 1946 Ford?

How big are the brake drums on a 1946 Ford?

1946-48 used 12 inch drums with the five 1/2-20 studs on 5-1/2 inch bolt circle and had the hub mounted outside the drum. The drum is usually a steel plate with the cast iron shoe surface cast to the center plate as shown in the pic. The following pic shows the detail of the 1946-48 brake drum style which is mounted to the inside of the hub.

How do you remove a brake drum on a flathead Ford?

Usually this will not come off in one pull due to the drag of the brake shoes. So simply remove the tool and re adjust the pull by taking the axle protector nut flipping it so the solid end buts the end of the axle and re assemble the puller and repeat the operation.

Can a Ford hub pull split the brake drum?

On the very worst Ford hub pull I ever did, on a really crummy Model A rear, the distortion from a 3-legger was enough to actually SPLIT the brake drum! I am pretty sure that every dog within 5 miles jumped 5 feet into the air at the sound that made, and then jumped again a bit later when the %&$# hub finally let go of its axle…

Where are the brake drums mounted on a Ford?

The following pic shows the detail of the 1946-48 brake drum style which is mounted to the inside of the hub. There are two varieties of this drum, and one will mount to 1932-35 welded wire spoke wheels directly with no adaptor and no problems.

What kind of brakes do I need for a 1946 Ford?

Complete brake rebuild kit for 1946-1948 Ford … 39-42 Ford front or rear brake shoes. 46-48 Ford front or rear brake shoes. Hub Fits 40 Style Drums 5×4-1/2″, 5×4-3/4″, 5x…

How big are the brake drums on a 1932 Ford?

All 1932-35 Ford wire spoke wheels matched a cast support and locator tab on the brake drum casting, just radially inboard of the lug stud. This is important for wheel location and support on the original drums. 1931 cast drums are 11 inch cast with a single rib on the outside diameter. They have five 1/2-20 studs on a 5-1/2 inch bolt circle.

How big is the stud on a Ford brake drum?

It will also be necessary to break off any balance weights spot welded to the drum in the recess and braze them back on just beyond their original radial location. This will keep them from interfering with the wheel hub. It is important that the offset between the stud hub flange and the drum sheetmetal be 1-3/8 inch as shown in the pic.

On the very worst Ford hub pull I ever did, on a really crummy Model A rear, the distortion from a 3-legger was enough to actually SPLIT the brake drum! I am pretty sure that every dog within 5 miles jumped 5 feet into the air at the sound that made, and then jumped again a bit later when the %&$# hub finally let go of its axle…

How big are the hydraulic brakes on a 1937 Ford?

They have five 1/2-20 studs on a 10-1/4 inch bolt circle and are the only drums which can directly interchange between mechanical and hydraulic brakes on 1937-39. 1940-41 drumsare 12 inch diameter with the five 1/2-20 studs on 5-1/2 inch bolt circle and had the hub mounted inside the drum.

What kind of brake shoes do you need for a 1948 Ford?

Complete brake rebuild kit for 1946-1948 Ford … Complete brake rebuild kit for 1939-1942 Ford … Complete brake rebuild kit for 1946-1948 Ford … 39-42 Ford front or rear brake shoes. 46-48 Ford front or rear brake shoes.

1946-48 used 12 inch drums with the five 1/2-20 studs on 5-1/2 inch bolt circle and had the hub mounted outside the drum. The drum is usually a steel plate with the cast iron shoe surface cast to the center plate as shown in the pic. The following pic shows the detail of the 1946-48 brake drum style which is mounted to the inside of the hub.

The following pic shows the detail of the 1946-48 brake drum style which is mounted to the inside of the hub. There are two varieties of this drum, and one will mount to 1932-35 welded wire spoke wheels directly with no adaptor and no problems.

They have five 1/2-20 studs on a 10-1/4 inch bolt circle and are the only drums which can directly interchange between mechanical and hydraulic brakes on 1937-39. 1940-41 drumsare 12 inch diameter with the five 1/2-20 studs on 5-1/2 inch bolt circle and had the hub mounted inside the drum.

Complete brake rebuild kit for 1946-1948 Ford … Complete brake rebuild kit for 1939-1942 Ford … Complete brake rebuild kit for 1946-1948 Ford … 39-42 Ford front or rear brake shoes. 46-48 Ford front or rear brake shoes.

Author Image
Ruth Doyle