How big are cat 3176b cylinder head bolts?
How big are cat 3176b cylinder head bolts?
CAT 3176B Cylinder Head Bolts Bolts 1-26 Step 1 = 150 Nm, 110 lb.ft Step 2 = 275 Nm, 200 lb.ft Step 3 = repeat step 2 = 275 Nm, 200 lb.ft Bolts 27-33 Step 4 = 25 Nm, 18 lb.ft Click for CAT 3176 engine manuals and specs
What kind of strength does cat bolts have?
Cat® Bolts are engineered to exceed SAE Grade 8 standards and ISO 10.9 strength specifications for longer wear life and improved reusability.
What is the new finish for Caterpillar bolts?
Bolts sizes M6 through M12 with the new Zinc Flake finish will be black. Bolts sizes M14 through M36 with the new Zinc Flake finish will be gray. Until stock of the current finish is depleted, you may receive either the current or new bolt color. Caterpillar is changing from Zinc Plating to a Zinc Flake finish for many bolts.
What’s the best way to install cat bolts?
Clean all surfaces of rust, paint, nicks, and burrs. Install bolts first in the center and work out toward the edge. Tighten all bolts to the specified torque (see chart below for specifications). Set bolt heads firmly into the edge countersink using a heavy hammer. Safety glasses MUST be worn when striking bolt heads.
Cat® Bolts are engineered to exceed SAE Grade 8 standards and ISO 10.9 strength specifications for longer wear life and improved reusability.
Bolts sizes M6 through M12 with the new Zinc Flake finish will be black. Bolts sizes M14 through M36 with the new Zinc Flake finish will be gray. Until stock of the current finish is depleted, you may receive either the current or new bolt color. Caterpillar is changing from Zinc Plating to a Zinc Flake finish for many bolts.
Where can I buy cat bolts for my car?
View local pricing and inventory as well as place orders online. Cat® Bolts are engineered to exceed SAE Grade 8 standards and ISO 10.9 strength specifications for longer wear life and improved reusability. We offer over 1,700 different bolt products with various grip lengths, thread sizes and finishes.
What’s the best way to tighten a bolt?
Tighten all bolts to the specified torque (see chart below for specifications). Set bolt heads firmly into the edge countersink using a heavy hammer. Safety glasses MUST be worn when striking bolt heads. Tighten all bolts again to the specified torque.
How much horsepower does a cat 3176 have?
CAT 3176 Power Land 187 kW to 242 kW, 250-325 hp @ 1700 to 2100 rpm Marine up to 448 kW, 600 hp @ 2300 rpm Click for CAT 3176 engine manuals and specs
Where can I find the latest torque specs?
Find the most up-to-date torque spec listings in electronic format. FelPro-Only.com is your convenient source for advanced sealing information. It’s the place to learn and share “tricks of the trade,” find proper diagnosis and installation instructions, and enjoy easy access to parts reference.
What does the initial torque do on a fastener?
There is an initial torque and an additional turn. The initial torque is required to bring all parts of the joint into contact. The additional turn provides the desired clamping force. Ensure that all fasteners have been torqued before you perform the additional turns. Turn the fastener according to the specified amount.
CAT 3176 Power Land 187 kW to 242 kW, 250-325 hp @ 1700 to 2100 rpm Marine up to 448 kW, 600 hp @ 2300 rpm Click for CAT 3176 engine manuals and specs
CAT 3176B Cylinder Head Bolts Bolts 1-26 Step 1 = 150 Nm, 110 lb.ft Step 2 = 275 Nm, 200 lb.ft Step 3 = repeat step 2 = 275 Nm, 200 lb.ft Bolts 27-33 Step 4 = 25 Nm, 18 lb.ft Click for CAT 3176 engine manuals and specs
Find the most up-to-date torque spec listings in electronic format. FelPro-Only.com is your convenient source for advanced sealing information. It’s the place to learn and share “tricks of the trade,” find proper diagnosis and installation instructions, and enjoy easy access to parts reference.
There is an initial torque and an additional turn. The initial torque is required to bring all parts of the joint into contact. The additional turn provides the desired clamping force. Ensure that all fasteners have been torqued before you perform the additional turns. Turn the fastener according to the specified amount.
