Other

Do you need transmission parts for Chevy S10?

Do you need transmission parts for Chevy S10?

Built to last, your Chevy S-10 handles anything you throw at it. Sometimes, though, the workload can lead to maintenance concerns like slipping gears, which might mean you need Chevrolet S-10 automatic transmission parts from AutoZone for an upcoming repair.

What kind of transmission fluid do you use on a 2000 S10?

I have a 2000 S10 with a 4.3 automatic (4L60E) trans, I was wondering what type and brand fluid to use and if it would be wise to use synthetic or stick with the non-synthetic. And a bottle of Lucas trans additive. Dexron 6 is what gm would recommend.

What are the dimensions of a Chevy S-10?

Visit Chevrolet for more information on the Chevrolet S-10. All dimensions are in inches unless otherwise noted.

What’s the difference between a 4-speed transmission and a 4L60E?

4L60 and 4L60E: It is the four-speed transmission, which is an evolution of 700 R4. The 4L60E family of transmissions uses two shift solenoids. By activating and deactivating solenoids, the electronic system can achieve distinct gear ratios in minimum time. Is there a difference between the 4L60 and 4l60E?

What kind of manual transmission does a Chevy S10 have?

Chevrolet began equipping the two- and four-wheel S10 with the NV3500 in 1990. The Borg-Warner five-speed Tremec T5 five-speed manual served the S10 briefly in 1994 and 1995. It was a lightweight model with an aluminum case. It was popular for its high torque rating of up to 305 foot-pounds.

I have a 2000 S10 with a 4.3 automatic (4L60E) trans, I was wondering what type and brand fluid to use and if it would be wise to use synthetic or stick with the non-synthetic. And a bottle of Lucas trans additive. Dexron 6 is what gm would recommend.

When did the Chevrolet S10 pickup truck come out?

by Rob Wagner. Chevrolet produced the compact S10 pickup truck from 1982 to 2004. The S10 employed myriad transmissions during its production run. From 1994, the S10 used one automatic and three manual transmissions.

What kind of transmission does a Borg Warner S10 have?

The Borg-Warner five-speed Tremec T5 five-speed manual served the S10 briefly in 1994 and 1995. It was a lightweight model with an aluminum case. It was popular for its high torque rating of up to 305 foot-pounds.

When did the Chevy S-10 pickup truck come out?

The Chevrolet S-10 is a compact pickup truck that was produced by Chevrolet. It was the first domestically built compact pickup of the big three American automakers. When it was first introduced as a “quarter-ton pickup” in 1981 for the 1982 model year, the GMC version was known as the S-15 and later renamed the GMC Sonoma.

What kind of engine does the Chevrolet S-10 have?

The flex-fuel (gasoline/ethanol) engine had an upgrade for some versions (LT and LTZ) and offered 206 hp with a 2.5 L LCV Ecotec with direct fuel injection. Also, for the first time in Brazil, Chevrolet offered the flex-fuel S-10 with four-wheel drive.

When did the Chevrolet S-10 Xtreme stop being made?

The SS was discontinued in 1998 and was replaced by the S-10 Xtreme for the 1999 model year. A 4.3 L V6 (which was optional on regular S-10s) was the standard engine used in the SS]

Built to last, your Chevy S-10 handles anything you throw at it. Sometimes, though, the workload can lead to maintenance concerns like slipping gears, which might mean you need Chevrolet S-10 automatic transmission parts from AutoZone for an upcoming repair.

What kind of engine does the Chevy S-10 Blazer have?

The 2.8L V6 was dropped as an option on the S-10 Blazer and Jimmy in 1990, though it was offered as an option on the S-10 and S-15/Sonoma pickups through 1993). A 5-speed manual transmission remained standard through 1994, but only with the TBI engine.

by Rob Wagner. Chevrolet produced the compact S10 pickup truck from 1982 to 2004. The S10 employed myriad transmissions during its production run. From 1994, the S10 used one automatic and three manual transmissions.

Where was the Chevrolet S-10 Blazer pickup truck made?

Chevrolet S-10 Blazer. The S-10 Blazer and S-15 Jimmy were based on the Chevrolet S-10 and GMC S-15 pickup trucks and were manufactured in Pontiac, Michigan; Linden, New Jersey; Moraine, Ohio; Shreveport, Louisiana; Ingersoll, Ontario, Canada; Ottawa, Ontario, Canada; Oshawa, Ontario, Canada; and São Paulo, Brazil .

Where can I buy a Chevy Blazer automatic transmission?

Buy Online. Pick Up In-Store. 10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only One of the traits that make your Chevrolet Blazer a satisfying SUV is its ability to shift smoothly between gears. You don’t have to do this manually, thanks to its automatic transmission.

The 2.8L V6 was dropped as an option on the S-10 Blazer and Jimmy in 1990, though it was offered as an option on the S-10 and S-15/Sonoma pickups through 1993). A 5-speed manual transmission remained standard through 1994, but only with the TBI engine.

Where can I buy used S10 Blazer parts?

Welcome to the largest online used Chevrolet S10 Blazer parts store on the internet featuring recycled/salvage Chevrolet S10 Blazer parts. All our salvage Chevrolet S10 Blazer parts and assemblies offered with a special 12 months warranty and low-price guarantee. Buying Chevrolet S10 Blazer parts form our salvage yards is safe and guaranteed.

When did the SS package end on the Chevy S-10?

The SS package was replaced by the “Xtreme” package. In 2001, a crew cab option was added and was only available with four-wheel drive and an automatic transmission. For the 2004 model year, the regular and extended cab models were discontinued; only the crew cab model was retained.

When did the Chevrolet’s 10 go out of production?

The S-Series ended production in Brazil in 2012, being replaced by the Chevrolet Colorado, but still with the name S-10. The first compact truck from the big three automakers was the rebadged Isuzu KB sold since 1972 as the Chevrolet LUV, and Ford quickly responded with the Mazda-built Ford Courier the same year.

The flex-fuel (gasoline/ethanol) engine had an upgrade for some versions (LT and LTZ) and offered 206 hp with a 2.5 L LCV Ecotec with direct fuel injection. Also, for the first time in Brazil, Chevrolet offered the flex-fuel S-10 with four-wheel drive.

How big are the teeth on a S-10 transmission?

They are also different size and number. S-10’s are likely 1 inch 14 teeth, V-8 boxes are fine spline. Mine was 1 inch 14 so I used a 11 inch flywheel and an 85 Astro Van 11 inch disc with a pressure plate from a small block. Used a throw out bearing from an SB but for a cast iron fork. Use the stock fork and clutch linkage.

What’s the S-10 transmission code in the glove box?

ML2 code in the glove box is 4.03 first and 2.37 second. ML3 is 3.76 first and 2.18 second. I use an S-10 box with a 4.03 first. 4.03 is great for occasional steep driveways or creeping in a field but I usually start off in 2nd gear, which is 2.37. This will require some slipping the clutch at takeoff but works good for me.

Where did the 1997 Chevy S-10 come from?

1st owner purchased on 03/31/97 and owned in LA until 02/05/02 • 2nd owner purchased on 02/05/02 and owned in LA until 12/13/02 • 3rd owner purchased on 12/13/02 and owned in LA until .

When was the last time I serviced my 1997 Chevy’s 10?

1st owner drove an estimated 6,097 miles/year • 2nd owner drove an estimated 10,453 miles/year • 3rd owner drove an estimated 0 miles/year. Last serviced at 142,770 miles in Nampa, ID on 07/20/18 • Vehicle serviced • A/C refrigerant recharged.

How do you check your automatic transmission fluid?

Steps Park your car on a level surface with the engine running. Raise the hood. Find the automatic transmission fluid pipe. Pull out the transmission fluid dipstick. Check the condition of the transmission fluid. Add transmission fluid, if necessary. Run the car and take it through each gear if possible.

Is the Chevy S10 Pickup a registered trademark?

GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, the CHEVROLET Emblem and the name S10 PICKUP are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes in the product after that time without further notice.

When to invest in an automatic transmission repair?

If you’re seeing signs that your transmission’s performance is going, it’s a good idea to be ready before it happens. Gears slipping, burning or blackened transmission fluid, and leaks are all signs that you need to invest in an S-10 automatic transmission repair.

What does DTC stand for on Chevy S10?

Power on the scan tool and select “PCM” from the main menu. Select “Transmission” from the PCM sub menu. Select “Clear all current and stored DTCs.” DTC is an acronym for “Diagnostic Trouble Code.” Disconnect the can tool from the vehicle and start the engine.

How much does automatic transmission cost at AutoZone?

Shop AutoZone for Chevrolet S10 Automatic Transmission. 10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only Built to last, your Chevy S-10 handles anything you throw at it.

When do you need to repair an automatic transmission?

Gears slipping, burning or blackened transmission fluid, and leaks are all signs that you need to invest in an S-10 automatic transmission repair. If ignored for too long, the problems worsen and could sideline your vehicle. Shop at your local AutoZone to find the right products at the right prices.

Why was the Chevy S10 pickup truck made?

Chevrolet parts manufacturers design a variety of motors that are meant to increase the power, speed, and torque in your vehicle. Components for the S10 pickup truck are efficient because they’re built with commercial-grade hardware.

How big is the engine on a Chevy S10?

Engine 4.3L VIN X 8th Digit Opt LU3 134K MILES!! Fits 03-07 EXPRESS 1500 (Fits: Chevrolet S10) Chevrolet parts manufacturers design a variety of motors that are meant to increase the power, speed, and torque in your vehicle.

How many liters does a 1997 Chevy S10 have?

In 1997, Chevy S10 vehicles had different hardware, so the hardware options built for gasoline components distributed less fluid. As a result, a typical product for a 1997 Chevrolet truck will have 2.2-liter hardware. Because the liters are reduced, some products for a 1997 Chevy pickup may be built with four cylinders.

Where to buy used Chevrolet S10 pickup transmissions?

Buy used Chevrolet S10 Pickup transmission from our network that offers up to a two-year warranty on qualified units! We carry a wide-ranging catalog of used Chevrolet transmissions for all applications including gas and diesel engines. Buy your used Chevrolet S10 Pickup transmissions from us and save time and money.

How much does a 1999 Chevy S10 pickup cost?

$7,995 West Coast Auto Sales Center Used 1999 Chevrolet S10 Pickup 2WD Regular Cab $9,900 Joe’s Car Connection Used 2000 Chevrolet S10 Pickup 2WD Extended Cab New Listing $11,900 Kuehn Motor Company Used 1998 Chevrolet S10 Pickup 2WD Regular Cab $16,988 Dean Auto Sales Used 1998 Chevrolet S10 Pickup 2WD Extended Cab $19,990 Done Deal Motors Inc

Chevrolet parts manufacturers design a variety of motors that are meant to increase the power, speed, and torque in your vehicle. Components for the S10 pickup truck are efficient because they’re built with commercial-grade hardware.

What kind of engine is in a Chevy S10?

Because the Chevy S10 has practical hardware, you can use components that are designed for other automobiles to power an S10 truck. Hardware for GMC vehicles manufactured in 2003 with 4.3-liter components can be used with an S10, and 1996 Blazer items are suitable for a Chevy S10 as well. The 2003 Sonoma also has hardware that fits the S10 pickup.

Can a 92 Blazer transmission fit a 94 S10?

Will a 92 blazer (4.3 4×4) transmission work in my 94 S10 (4.3 4×4)? the transfer case from the blazer is about 3 to 4 inches longer then the one in my s10! what do i do!? 9 people found this helpful. Is there any difference between a 87 2.8 transmission and a 91 2.8 transmission 10 people found this helpful.

Can a 2.2L transmission fit a S-10?

12 people found this helpful. To all the questions for the 98-02 YEARS 2.2 automatic 4L60E trans on a S-10…the 98-02 YEARS 3.8L V6 automatic Camaros and Firebirds bell housing is the same. Just did a bunch of research and found the casting number on my broken bell housing.

Is there any difference between 87 and 91 transmission?

Is there any difference between a 87 2.8 transmission and a 91 2.8 transmission 10 people found this helpful. Can anyone help me can I use the tcase out of a 2.8 88 s10 in my 89 4.3 s10 blazer

What kind of transmission does a 1996 Chevy S10 have?

The 1996 and later model year S10s powered by in-line four-cylinder 2.8-liter engines were equipped with the New Venture (NV) 1500 five-speed manual transmission. It had an aluminum case. This transmission remained with the S10 until the end of its production run. NV3500 Manual

What is the shifting solenoid on a Chevy S10?

The shifting solenoid on a Chevrolet S-10 pick-up is designed to regulate when the transmission shifts. This solenoid is part of the electronic transmission control system, and is controlled by the powertrain control module, or PCM. The PCM actuates the shifting solenoid when it determines that an upshift or downshift is required.

Shop AutoZone for Chevrolet S10 Automatic Transmission. 10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only Built to last, your Chevy S-10 handles anything you throw at it.

What kind of car is the Chevy’s 10?

Sleek styling, fuel-efficient base engine, stout optional V6, stump-jumping ZR2 off-road package, sporty Xtreme model handling. Spotty build quality, inferior-grade interior trim, low seating positions, poor crash-test scores.

What kind of suspension does a Chevy S-10 have?

Off-roaders will want the burly ZR2 package with its wider track and taller ride height, featuring special wheel flares, tough suspension components, aggressive rubber and 3.73 rear-axle ratio.

What kind of transmission does a Chevrolet S10 have?

The three-element torque converter coordinates with the trademark Simpson planetary geartrain, offering three forward levels and a reverse. Starting in the early 1980s, the system was gradually updated to include four-speed S10 transmission.

How much does a 2000 Chevy S10 pickup cost?

Used 2000 Chevrolet S10 Pickup LS $5,995 Wagner Ford Toyota Used 2001 Chevrolet S10 Pickup 2WD Extended Cab $6,999 Empire Auto Used 2001 Chevrolet S10 Pickup 2WD Extended Cab $7,995 West Coast Auto Sales Center Used 2002 Chevrolet S10 Pickup 4×4 Crew Cab LS $8,399 S.S. Motors LLC Used 1999 Chevrolet S10 Pickup 2WD Regular Cab $9,900

What’s the gas mileage on a 2000 Chevy S-10?

CARFAX used car owners give the 2000 Chevrolet S-10 4.4 stars out of 5, with a total of 17 reviews. Reviewers especially like the 2000 S-10 for its cost and performance. What is the MPG of the 2000 Chevrolet S-10? The EPA-estimated gas mileage for the 2000 Chevrolet S-10 is 16 mpg for city travel and 21 mpg on the highway.

How much does a Chevy S10 cab cost?

Used 2002 Chevrolet S10 Pickup 4×4 Crew Cab LS $8,399 S.S. Motors LLC Used 1999 Chevrolet S10 Pickup 2WD Regular Cab

How long does a Chevrolet S10 transmission last?

We carry a large inventory of Chevrolet S10 Pickup automatic transmissions. Our used S10 Pickup transmissions inventory changes daily as we dismantle more vehicles. We warranty our entire used S10 Pickup manual or automatic transmissions with a minimum 6-months to 2-years depending on the specific S10 Pickup transmission assembly.

Will a 92 blazer (4.3 4×4) transmission work in my 94 S10 (4.3 4×4)? the transfer case from the blazer is about 3 to 4 inches longer then the one in my s10! what do i do!? 9 people found this helpful. Is there any difference between a 87 2.8 transmission and a 91 2.8 transmission 10 people found this helpful.

12 people found this helpful. To all the questions for the 98-02 YEARS 2.2 automatic 4L60E trans on a S-10…the 98-02 YEARS 3.8L V6 automatic Camaros and Firebirds bell housing is the same. Just did a bunch of research and found the casting number on my broken bell housing.

Do You need automatic transmission parts at AutoZone?

Sometimes, though, the workload can lead to maintenance concerns like slipping gears, which might mean you need Chevrolet S-10 automatic transmission parts from AutoZone for an upcoming repair. If you’re seeing signs that your transmission’s performance is going, it’s a good idea to be ready before it happens.

What was the first GM four speed transmission?

It uses lighter materials such as alloys instead of ferrous metals. It is also the first GM transmission to use throttle valve cable to control the shift points and part throttle kick down. 700 R4: Introduced in 1982, this is a four-speed transmission. It was renamed 4L60 in 1990.

Gears slipping, burning or blackened transmission fluid, and leaks are all signs that you need to invest in an S-10 automatic transmission repair. If ignored for too long, the problems worsen and could sideline your vehicle. Shop at your local AutoZone to find the right products at the right prices.

Sometimes, though, the workload can lead to maintenance concerns like slipping gears, which might mean you need Chevrolet S-10 automatic transmission parts from AutoZone for an upcoming repair. If you’re seeing signs that your transmission’s performance is going, it’s a good idea to be ready before it happens.

Author Image
Ruth Doyle