Do you need to replace the transmission on a Chevy Silverado?

The Silverado has a durable drivetrain for the most part and 4WD components don’t commonly need to be repaired or replaced if they’re maintained right. But the transmission is a different story. Chevy Silverado transmission problems show up first as shift flares while you’re accelerating.

How do you change transmission fluid in a Chevy Silverado?

Find the transmission oil dipstick which has a red cap and insert a funnel into where the dipstick is. Now, you can pour in the fluid. Put in 5 quarts of fluid and keep checking the oil level so that you won’t overfill it. Now start the car and let it run for some minutes. Shift all the gear and place back in the park.

Why is my Chevy Silverado transmission not working?

But the transmission is a different story. Chevy Silverado transmission problems show up first as shift flares while you’re accelerating. Then the Check Engine light comes on for ‘loss of prime’ codes. Soon after, the transmission won’t engage forward, reverse, or both. Again, lack of maintenance is often the culprit.

What’s the transmission capacity of a 2004 Chevy Silverado?

The fluid capacity for 2004 Silverado is 2004 7.3 L and 12.8L. Park the vehicle on a leveled surface and put it in the brake. Then, open the hood and let the transmission cool for 30 minutes. Now you need to check your manual to know the capacity of your car’s transmission.

How much transmission fluid does a Chevy Silverado use?

A Chevy Silverado 1500 transmission flush can use around 10 quarts of fluid. The right amount of fluid ensures proper cleaning and flushing out of the system. Based on the transmission type, you can find a difference in the quantity of fluid. For instance, a manual transmission may need 13.7 quarts, while the automatic one needs about 13.4 quarts.

When to check shift cable on Chevy Silverado?

If you find that you are having issues shifting into gear or removing your key from the ignition then you should inspect your shift cable for any signs of wear or damage.

Why does my Chevy Silverado not reverse forward?

Soon after, the transmission won’t engage forward, reverse, or both. Again, lack of maintenance is often the culprit. Once symptoms are present, it’s too late just to change the transmission fluid and filter.

Why are my reverse lights not turning on?

Before replacing the switch, when you engaged the reverse gear, the reverse lights did not turn on, because there was a fault inside the switch itself. With the new one installed, current will be allowed to flow through the switch in the transmission, allowing the reverse lights to turn on.

How to know if your Chevy Silverado has transmission problems?

No 1st or 4th gear (torque converter doesn’t lock, can be driven in 2nd, 3rd, and Reverse gear): 1 Transmission is in “limp home” mode or lost electrical power. 2 Check the under-hood fuse that powers the transmission. If it’s tripped, look for a short. 3 If in “limp home” mode, look for PCM codes to trigger this fault condition.

What do you need to know about Lo Reverse transmission?

The “Lo-reverse” clutches are worn out, there’s a broken sun shell, a fluid leak in the reverse apply circuit, or a worn boost valve. A high-viscosity additive/seal restorer may help with the fluid leak, and worn valve for the short term. Transmission must be removed and rebuilt. Check the wiring and grounds.

What does the torque converter do in a Chevy Silverado?

It is a fluid-filled coupling that acts as an intermediary between the engine and the transmission. When you set off from a stop and the engine revs shoot up a bit before the car takes off, that’s the torque converter helping to convert initial engine revs into movement.

The 3rd-4th clutches are worn out. The transmission needs to be replaced or repaired. 1st and 3rd only, but no 2nd, 4th, or reverse: The sunshell is damaged. The transmission needs to be replaced or repaired.

What kind of truck is a 1998 Chevy?

1998 chevy truck: gears..quit working..stoped..reverse works fine. Vocational, Technical or Tra… Hello, I have a 2004 GMC Sierra HD Duaramax 6.6L with Allison Transmission.

How much does it cost to replace a GM transmission?

Details: Offer ONLY valid on purchase of engines, transmissions, and transfer cases. $1,000 minimum purchase. When you enter the code SHIPFORFREE, we will immediately take $100 off your shipping charges at checkout.

Where is the cooling inlet on a Chevy 4L60 automatic transmission?

The automatic transmission usually has its cooling inlet on the right side with a square oil reservoir. The key distinction of the 4L60E automatic transmission (1997-2006) from the early 4L60E (1992-1997) or 4L60 (1990-1992) or 700R4 (1982- 1989) is the “six hex bolts” of the rear output or rear cover.

Why is the transmission slipping on my Chevy Silverado?

The sunshell is damaged. The transmission needs to be replaced or repaired. The 2-4 band is slipping, or servo seals are leaking. Servo seals can be replaced without pulling transmission, or the transmission must be removed for band replacement. No 1st or 4th gear, and transmission shifts from 2nd to 3rd by itself: