Do you need to replace the brakes on a Dodge Ram?
Do you need to replace the brakes on a Dodge Ram?
The brakes on the Dodge Ram work very hard, and since it’s all about the friction in the brake system, periodic maintenance is much needed. Here’s how to replace your brake pads, calipers, and rotors in the comfort of your own garage. This article applies to the Dodge Ram 1500 (2009-Present).
How big is the brake pin on a Dodge Ram?
Pump the brakes multiple times to seat the pads. Then, road test them. For a 2003-2005 Ram (all series), torque the front mounting pin bolts to 24 foot pounds and the rear bolts to 11 foot pounds. Torque the front banjo bolt for the brake hose to 20 foot pounds and the rear banjo bolt to 23 foot pounds.
Where are the brake shoes on a Dodge Ram?
So, on a drum-brake-equipped truck, replacing the emergency brake is a matter of replacing the rear brake shoes. The emergency brake on a disc-brake-equipped truck works with shoes located inside of the rear brake rotors.
How do you Bleed the brakes on a Dodge Ram?
Have your helper sit in the driver’s seat of the vehicle, pump the brake pedal three times and then hold it down. Place the appropriate size socket on the bleeder screw located on the top of the brake caliper, and turn it counter-clockwise a quarter turn; this will release brake fluid and any air that is present.
When to replace brake pads on Dodge Ram 1500?
Just remember, before you order that brake pad replacement for Dodge Ram 1500, inspect the entire set of brakes. You might need more pads, or you might be dealing with brakes that need more parts replaced than just the pads. An inspection ensures you order all the right parts the first time.
So, on a drum-brake-equipped truck, replacing the emergency brake is a matter of replacing the rear brake shoes. The emergency brake on a disc-brake-equipped truck works with shoes located inside of the rear brake rotors.
What is the purpose of the emergency brake on a Dodge Ram?
The emergency brake has two major functions. As the name suggests, it is a back up brake just in case your other brakes fail for some reason. It is also used as a parking brake to keep your vehicle rolling away while you’re not in it.
How do you replace the rear wheel on a Dodge Ram?
Elevate rear wheels off ground. Using a breaker bar or an air impact wrench and the proper size socket, remove the wheel lug nuts that secure the rear wheel in place. Once you have removed the lug nuts, remove the rear wheel and place it out of the way. Figure 2. Remove rear wheel lug nuts.
