Do you need Noid light for fuel injector?
Do you need Noid light for fuel injector?
All fuel injection and ignition functions are regulated by the computer control module, which is sometimes also referred to as the ECM, PCM or VCM. First of all you need a noid light to check for a pulse. A voltmeter will not work, neither will a 12 volt test light.
What’s the difference between the 88 and 92 injectors?
The Throttle bodies look the same, the injectors may have some internal difference, perhaps the 92 has higher fuel pressure, the 88 only has 9 to 13 lb fuel pressure. I’m on my way to get the noid light now, its noon here.
What is the code for a fuel injector failure?
If you are using a generic (not vehicle manufacturer specific) code reader; then you can expect to see codes beginning with P02. For example, a fault with an injector in cylinder one would give a code of P0201.
What kind of injector does a Sonoma 88 S10 use?
Compnine also lists the 92 sonoma with a fuel injector as a ACDelco #217-338. On the 88 s10 the fuel injector is a ACDelco #217-336. Thanks for the help. The Throttle bodies look the same, the injectors may have some internal difference, perhaps the 92 has higher fuel pressure, the 88 only has 9 to 13 lb fuel pressure.
Why is my Check Engine light on after installing fuel injection?
Most of the problems encountered while installing your fuel injection system or after a time of operation are very simple. If your check engine light is on you more than likely have a hard fault meaning something is grounded out, unplugged, operating out of range or has gone bad.
Why is my TBI fuel injection light on?
Troubleshooting your TBI Fuel Injection System Most of the problems encountered while installing your fuel injection system or after a time of operation are very simple. If your check engine light is on you more than likely have a hard fault meaning something is grounded out, unplugged, operating out of range or has gone bad.
What causes a fuel injection system to leak?
First and foremost the engine and fuel injection system must be free from vacuum leaks. Vacuum leaks are the leading cause of installation issues with your fuel injection system. Check all sources of potential vacuum leaks including components not related to the fuel injection
