Can you replace the brakes on a 1985 Chevy K10?

Am replacing brake cylinders and brakes on my 1985 Chevy K10 after discovering a leaking cylinder during State inspection. This picture and color coded piece you have prepared is absolutely the best i have ever had the pleasure of using. Thank you for your excellent guide!

What causes rear wheel to lock up when braking?

Problem: One or both rear wheels lockup during braking or the rear end of the car squats when braking. Cause: Rear Wheel lockup or squatting has many causes. Here is the list of possible causes: Service and parking brake adjustment. Rear brake hardware. Shoe lands or bosses. GM clip in wheel cylinders. Brake drum condition.

What causes rear drum brakes to engage too soon?

If the parking brake system is not de-adjusted properly before the brake shoes are adjusted it will cause the rear brakes to engage too soon. This is especially true of vehicles equipped with duo-servo rear drum brakes (see Figure 61.1).

What kind of brakes do Chevy trucks have?

The problem is my Chevy truck is a ’49, which came with the old style huck brakes. Having no luck finding detailed instructions or a complete hardware list to verify that I actually have all the parts I need for the rear drums (disc kit installed up front).

What is the assembly sequence for a 1966 GM drum brake?

Assembly sequence for a “typical” GM drum brake 1966 GM half-ton pickup (Delco Shown, Bendix similar) The parts pile, excl. park lever and pushrods. NOTE: colors are random paints I had on hand. Not “color-coded”. Self adjuster (SA arm) group Adjuster wheel group Where it all goes Park brake lever on the cable

How do you know if your Chevy has a brake problem?

You will find the booster between the master cylinder and the firewall in your engine compartment. A check valve that is faulty can also let vacuum bleed out. You can diagnose this by starting your Chevy in order to build vacuum, and then turning it off for four or five minutes. Then you should try the brakes.

How do you install a drum brake assembly?

put guide on anchor. place SA arm with pivot on rear shoe with nail, tube washer & straight spring Add actuator link, follow with overide spring from arm to pivot (next pic) Place return spring under SA arm. note placement of pivot and link Press shoes against anchor. Install front shoe return spring to anchor.

How do you install a park brake lever?

Park brake lever on the cable Start here: lube park lever pin and wavy washer, install thru rear shoe, add the “Jesus clip” Lube Starwheel shaft & threads with chassis grease or moly lube; thread the adjuster together but do not tighten star wheel end goes toward rear shoe. NOTE!

What is the assembly sequence for a GM drum brake?

Drum brake assembly Assembly sequence for a “typical” GM drum brake 1966 GM half-ton pickup (Delco Shown, Bendix similar) The parts pile, excl. park lever and pushrods. NOTE: colors are random paints I had on hand. Not “color-coded”. Self adjuster (SA arm) group Adjuster wheel group Where it all goes Park brake lever on the cable