Can You Bleed the brakes on a car?
Can You Bleed the brakes on a car?
YES, I DID, AND I’M AN AUTO TECH, I BLED THE BRAKES IN THE SEQUENCE THAT IT SAYS TO DO IT IN, RR, LF, LR, RF, BUT CAN NOT GET THE REAR BRAKES TO BLEED OUT. now try the brake,full pedal? Do this on every line until you find your problem area
Is the master cylinder still bleeding after replacing?
I HAVE TRIED TO BLEED IT OUT ALL DAY, I HAVE USED MY SNAP ON SCAN TOOL, STILL BLEEDING AND DRIVING, BLEEDING AND DRIVING, ANY HELP WOULD BE APPRECIATED. reading your comments I was able to find an issue on one of the calipers after replacing the master cylinder twice and after bleeding the system several times, thanks!
What’s the problem with the right front caliper?
OK I DID THIS PROCEDURE AND FOUND THAT THE RIGHT FRONT CALIPER IS THE PROBLEM, AND OF COURSE NOTHING IS OPEN NOW, IN THE MORNING I WILL CALL THE DEALER AND SEE WHAT I CAN FIND, UNITED AUTO SUPPLY AND NAPA DO NOT HAVE ANYTHING AVAILABLE. THANKS FOR YOUR HELP. Remember this test cause i don’t share it with everyone.
How to fix no pressure brakes after replacing calipers?
Brakes, no pressure after replacement of calipers and then bleeding brakes. 1. Remove reservoir filler caps and fill reservoir. 2. If calipers, or wheel cylinders were overhauled, open all caliper and wheel cylinder bleed screws. Then close each… 3. Attach one end of bleed hose to bleed screw and
How to diagnose soft brake pedal master power brakes?
The easiest way to diagnose this problem is to pump the brake pedal gently a few times. In doing so, the pedal should become firmer with each gentle press of the pedal. If it does, then the obvious approach of bleeding the brakes must commence.
YES, I DID, AND I’M AN AUTO TECH, I BLED THE BRAKES IN THE SEQUENCE THAT IT SAYS TO DO IT IN, RR, LF, LR, RF, BUT CAN NOT GET THE REAR BRAKES TO BLEED OUT. now try the brake,full pedal? Do this on every line until you find your problem area
Why do I have soft brake pedal on my car?
The most common reason for a soft brake pedal is simply air still in the system. The easiest way to diagnose this problem is to pump the brake pedal gently a few times. In doing so, the pedal should become firmer with each gentle press of the pedal. If it does, then the obvious approach of bleeding the brakes must commence.
