Are there convertible top lift cylinders for Chrysler Sebring?

1 Pair (Drivers & Passenger Side) New Convertible Top Lift Cylinder for 1998-2006 Chrysler Sebring. These Lift Cylinders are an exact fit replacement for the original cylinders. This set includes 2 cylinders, 1 for the driver side and 1 for the passenger side.

How many miles does a 2004 Chrysler Sebring have?

OUr 2004 Chrysler-Sebring convertible has ONLY 51,500 miles. Yet the front catalytic converter got so hot, that it burned a hole in the converter. That is extremely disappointing. Of course, the warranty for the converter was ONLY 8 years, so we are out $1,000 for a replacement.

Can a cabriolet top cylinder be rebuilt?

Cabriolet Hydraulics offers a rebuild service for leaking convertible top cylinders. We have addressed the problem of failed OEM seals by replacing them with superior hard-wearing elastomer seals. Our seals are custom designed and manufactured to our specifications, significantly increasing the service life of the rebuilt cylinders.

When did the Chrysler Sebring convertible come out?

Although the coupe shared the same name and some styling cues, it was mechanically unrelated to the other Sebring models. The Sebring line was introduced in 1995 with the Chrysler Sebring coupe. It was the replacement for the Chrysler LeBaron coupe. In 1996 the convertible was introduced, replacing its LeBaron counterpart as well.

How do you replace the rear window on a Chrysler Sebring?

How to Replace the Rear Window in a Chrysler Sebring Convertible Use a sharp blade to cut away the black rubber weather stripping perimeter around the edge of the window. Begin by making an incision at the top of the perimeter and proceed to cut around the tape in a clockwise direction.

How big is the window on a Chrysler?

Verify that the window drops approximately 1/4 inch when the door opens, and raises when door closes. If window does not drop or raise, repeat procedure starting at step 3. You can disregard the portion about clearing the dtc’s they won’t hurt anything as they’ll store and eventually delete themselves.

What kind of car is the 2007 Chrysler Sebring?

Show full review The totally redesigned 2007 Sebring midsize sedan has the unenviable spot of being Chrysler’s first all-new car since the 300 full-size sedan, a runaway success credited with reversing Chrysler’s flagging fortunes. Breakout models like the 300 don’t come around all that often, and back-to-back hits are even more uncommon.

What’s the difference between a Chrysler 300 and a Sebring?

On the outside, the Sebring has little in common with the hulking 300; its grille and headlights remind me of the Crossfire roadster. Like the Crossfire, the Sebring also has the brand’s now-signature hood strakes. From the hood to the back, the Sebring has a number of different design elements in play.

What’s the towing capacity of a Chrysler Sebring?

The Sebring’s maximum trailer towing capacities are competitive for this class, and vary by engine size. Four-cylinder models can tow up to 1,000 pounds, while Sebrings with the 2.7-liter V-6 can haul 1,500 pounds. Opting for the 3.5-liter V-6 brings a 2,000-pound towing capacity.

When do I need to replace my Sebring convertible top?

If you’re driving a 2001-2006 Chrysler Sebring convertible and require a replacement Chrysler Sebring convertible top or need Sebring convertible top repair parts, you won’t find a better deal than right here.

What kind of top do you use for a convertible?

Has foam backing and is best used with Sailcloth Vinyl convertible tops. New replacement foam backed headliner for vinyl and canvas tops. Steel cables threaded into a pocket around the windows.

How to install a convertible top hydraulic lift cylinder?

Ensure the plate tab is inserted into the locating hole (A) and the pin is inserted in cylinder (B). Tighten the attaching nut (C) with a 13mm wrench to the proper torque. The cylinder must move/swing freely. If not, remove the cylinder and investigate the cause.

Can a mismatched top cylinder cause a problem?

We should advise our customers that mismatched hydraulic top cylinders can create problems. It is a real possibility that a new convertible top cylinder can apply its pressure differently than the other old (retained) top cylinder. This will result in asymmetrical operation of the convertible top.

What kind of fabric does a Chrysler Sebring use?

Ray B, 2004 Chrysler Sebring. Almost all manufacturers use Haartz fabrics. They may specify “heaviest weight” or “original replacement” in ways that seem reassuring. But they do not really tell the whole story.

Who is top hydraulics for Mercedes soft top?

Top Hydraulics remanufactures all hydraulic cylinders for the soft tops and vario roofs on Mercedes convertibles and many other models. We make your cylinders “better than new” with seals superior to those used by the OEM! Top Hydraulics, Inc. is an equal opportunity employer.

Who is the largest remanufacturer of convertible top cylinders?

Some of our upgrades include replacing interior parts with precisely machined ones that allow us to use seals of superior quality, material, size, and geometry. Top Hydraulics, Inc. is the largest remanufacturer of convertible top cylinders.

Is there a way to rebuild a leaking hydraulic cylinder?

Our seals are custom designed and manufactured to our specifications, significantly increasing the service life of the rebuilt cylinders. These seals have a high resistance to decomposition when exposed to hydraulic fluid, moisture, pressure, and high temperatures. We offer several rebuild service options for your leaking cylinders.

How many hydraulic cylinders are in a Chrysler convertible?

Chrysler PT Cruiser Convertible Model Years 2006-2008 use two hydraulic lift cylinders. Top Hydraulics offers a Core Exchange option for PT Cruiser hydraulic cylinders, where we can ship cylinders from our stock first. Chrysler Crossfire Convertible Top Hydraulic Cylinders Rebuild/Upgrade Service, using the best seals available.

Why is my hydraulic pump leaking on my Chrysler convertible?

If your convertible top is moving slowly or not at all, you likely have one or both of the hydraulic cylinders leaking, which emptied out the pump’s reservoir. This is normal for a convertible of this age, as the seals in the hydraulic cylinders are decaying.

How do you fill a hydraulic pump in a Chrysler convertible?

You can fill the pump slowly with a syringe or a squirt bottle through the fill plug in the middle, on top of the pump. You may need to use pliers or vise grips to loosen the plug if you end up stripping the 5-mm inside hex. The filling process through the fill plug is slow.

What happens to hydraulics in a convertible top?

The OEM cylinders will all eventually fail, accelerated by heat and impurities or water in the hydraulic fluid – Top Hydraulics replaces the seals with far superior material. Send in your cylinders, and we turn them around quickly. Sorry, no core exchange.