Most popular

Why is my TBI fuel injection light on?

Why is my TBI fuel injection light on?

Troubleshooting your TBI Fuel Injection System Most of the problems encountered while installing your fuel injection system or after a time of operation are very simple. If your check engine light is on you more than likely have a hard fault meaning something is grounded out, unplugged, operating out of range or has gone bad.

Why is my Check Engine light on after installing fuel injection?

Most of the problems encountered while installing your fuel injection system or after a time of operation are very simple. If your check engine light is on you more than likely have a hard fault meaning something is grounded out, unplugged, operating out of range or has gone bad.

What causes a vacuum leak in a fuel injection system?

Vacuum leaks are the leading cause of installation issues with your fuel injection system. Check all sources of potential vacuum leaks including components not related to the fuel injection system. There are instances where the vacuum leak is coming from the adapter plate used to attach the throttle body to the manifold.

What should fuel pressure be when no Buzz?

Fuel pressure is typically in the 35 to 45 psi range. If your Anti-Theft light is flashing; the anti-theft system is disabling the fuel pump to prevent the engine from starting. Bad fuel pump (Pump should run for a few seconds when ignition key is turned to start, no buzz means no fuel delivery to the engine).

What are the symptoms of a bad air injection pump?

One of the early symptoms of a bad secondary air injection pump is the Check Engine warning light turning on. The engine control unit can automatically detect when the secondary air injection pump has a problem.

What happens when the fuel injector fuse is blown?

It was driving fine, and then suddenly the engine died shortly after exiting the freeway. Fuel pump seems to be fine, but the fuel injector fuse is blown and when replaced, blows again. Clicking this will make more experts see the question and we will remind you when it gets answered. You can’t post conmments that contain an email address.

When to replace a secondary air injection pump?

If you’ve already experienced engine stalling, poor acceleration, and a check engine warning light, then you need to have the secondary air injection pump checked out immediately. If it is proven to be the problem, have it replaced by a certified mechanic.

What can cause an air pump to malfunction?

Faulty Air Pump Check Valve(s) Defective Vacuum Lines or Air Control Solenoids. Defective Air Pump or Air Pump Relay. Restricted System or System Plugged with Carbon. Water collected and accumulated in the AIR pump. Frozen or corroded pump. Blown AIR pump fuse caused by freezing.

What kind of scan tool do I need for GM TBI?

A scan tool can be used and set up for a GM TBI application to read the data, or to check for stored codes. Consult a service manual or see below for any check engine light code definitions. You can use a late 80’s or early 90’s GM TBI definition. If you have access to a scan tool use a hook up for a 1990 350 cu. in. 5.7L Chevrolet truck.

What is the TBI code on a 1990 Chevy truck?

Consult a service manual or see below for any check engine light code definitions. You can use a late 80’s or early 90’s GM TBI definition. If you have access to a scan tool use a hook up for a 1990 350 cu. in. 5.7L Chevrolet truck. For some scan tools enter VIN 10th“L” 3rd“C” 8th“K”.

When to change the TBI pump in a car?

Nice thing about the Actron gauge is the hose is long enough that you can watch it while you drive. If the fuel pressure drops more than 1 psi under 8-10 seconds of full throttle the pump should be changed and dont put the stock TBI pump back in even if your engine is stock.

Troubleshooting your TBI Fuel Injection System Most of the problems encountered while installing your fuel injection system or after a time of operation are very simple. If your check engine light is on you more than likely have a hard fault meaning something is grounded out, unplugged, operating out of range or has gone bad.

Nice thing about the Actron gauge is the hose is long enough that you can watch it while you drive. If the fuel pressure drops more than 1 psi under 8-10 seconds of full throttle the pump should be changed and dont put the stock TBI pump back in even if your engine is stock.

Consult a service manual or see below for any check engine light code definitions. You can use a late 80’s or early 90’s GM TBI definition. If you have access to a scan tool use a hook up for a 1990 350 cu. in. 5.7L Chevrolet truck. For some scan tools enter VIN 10th“L” 3rd“C” 8th“K”.

A scan tool can be used and set up for a GM TBI application to read the data, or to check for stored codes. Consult a service manual or see below for any check engine light code definitions. You can use a late 80’s or early 90’s GM TBI definition. If you have access to a scan tool use a hook up for a 1990 350 cu. in. 5.7L Chevrolet truck.

How do you clean a Chevy TBI fuel injector?

How to Clean a Chevy TBI Fuel Injuctor. Spray the injector or injectors with throttle body cleaner, and gently clean the exterior and the tip of the injector with the brush. Do not insert any metal objects into the tip of the injector, as this will enlarge the nozzle tip, permanently damaging the injector. Replace the air filter assembly,…

Do you need a tachometer for fuel injection?

Use of this section may require a digital voltmeter, test light, fuel pressure gauge, timing light, tachometer and/or a diagnostic scan tool. If you are familiar with vehicles and how they are serviced you should be able to work through this section with no issues.

Which is the best way to test a fuel injector?

Check your repair manual for further tests, if necessary. You can also test the injector controlling circuit using a noid light. This is the easiest way to test an injector feeding circuit. The noid light connects to the harness of the fuel injector you want to test. You can loan or buy a set of noid lights from your local auto parts store.

Can a throttle body fuel injector be inspected?

Photo courtesy of Albertas Agejevas on Flickr. Unlike injectors on throttle body fuel injection (TBI) systems, those used on an Electronic Fuel Injection (EFI) configuration don’t have their fuel spraying accessible for inspection.

Most of the problems encountered while installing your fuel injection system or after a time of operation are very simple. If your check engine light is on you more than likely have a hard fault meaning something is grounded out, unplugged, operating out of range or has gone bad.

Author Image
Ruth Doyle