Why is my sewing machine not threading properly?

Make sure your presser foot is up while threading—many machines lock the tension disks when the presser foot is down, making it impossible to thread the machine through the disks correctly. Remove and re-thread your bobbin. Some machines are particular about which way the bobbin unwinds. Consult your manual to be sure it’s inserted correctly.

What causes thread to get tangled on Brother Sewing Machine?

The wrong sized cap may cause the thread to get tangled and you would have to untangle it. When trying to diagnosis these issues make sure your owner’s manual is handy. It will help guide you in solving a lot of these issues as well as show you how to re-thread the machine correctly.

Which is the correct way to thread a sewing machine?

When threading the machine keep the presser foot up to release the tension. Check out this post on correctly threading the machine. Needle may be inserted wrong or not in all the way ; Make sure that the needle is fully inserted and facing the correct directions as specified in the sewing machine manual.

Why does my sewing machine keep getting Lint on it?

The most common explanation is a need for cleaning or maintenance. Right away stop operating the machine ; turn off the power and then inspect the machine for the problem. Try Replacing the needle. Another solution is to remove lint from under needle plate and bobbin area.

Why is the thread on my Serger not working?

First, you may have missed a thread guide on the lower looper arm. Second, it may be that your lower looper thread is not placed correctly. There is a third problem that may cause your lower looper to have problems. That is when the needle thread gets tangled around the looper arms.

Why is my Brother Sewing Machine losing thread?

If the tension is too tight or even too loose, it can cause the machine to lose its thread. Adjust your tension to 4 and see if that makes a difference. Then it may just be the thread’s fault. If you do not buy top quality thread then the low-quality brand may not stay where you put it or it breaks very easily.

Why is my sewing machine not working right?

If it is not threaded, put in place correctly, bent, or broken your sewing machine will not work right. Replacing the needle is a common repair and will get you back on track. Other places that are a source for these common problems are the bobbin area and the threading of the machine.

What to do when your Serger won’t stitch?

When puckers form you should loosen the tension and tighten the tension when loops or Vs appear on the underside of the garment you are sewing. You may run across the problem where your lower looper threads are pulling to the right of your fabric. In this situation, you can either loosen the upper looper tension or tighten the lower looper tension.