Why is my Komatsu wa250-3 not moving forward?
Why is my Komatsu wa250-3 not moving forward?
Rear Dive shaft with the two universal joints are not aligned straight. when drive axle turns the coupler for the two u joints hits the bottom of the torque convert… read more Expert komatsu wa250-3, It will not move forward or in reverse…damper
How does the Komatsu wa 380 engine work?
The large cab is mounted with Komatsu’s unique ROPS/ FOPS (ISO 3471/ISO 3449) viscous mounts. The low-noise engine, hydraulically driven fan, and hydraulic pumps are mounted with rubber cushions, and the cab sealing is improved to provide a quiet, low-vibration, dustproof with pressurizing, and comfortable operating environment.
What’s the problem with the transmission on a Komatsu?
Hi Gurus! I’m having trouble with a Komatsu transmission. Earlier it looses drive when engine runs approx. 1-2 minutes. Nowadays engine just revs and truck goes nowhere. I’ve checked transmission oil and it’s in max-line, even little bit over it. Oil is quite dark and I don’t know when it’s last time changed.
How to find the fault code on a Komatsu wa200?
The E03 is a general code. You will need to use your display to find the correct code. What is your serial number and I will send you the info on how to see the codes. Ask Your Own Heavy Equipment Question Technician: Dan, Mechanic replied 8 years ago
What to do if your Komatsu doesn’t move?
Start the forklift and check for the present performance. If the performance is better than before, You replace the strainer, Transmission filter and oil for Transmission. You can use the oil SAE 10w. as your transmission oil. Thanks for the update report. Hello again! I’ve had the gearbox overhauled and it runs fine again.
How many horsepower does a Komatsu wheel loader have?
CEN00076-05 Materials and specifications are subject to change without notice is a trademark of Komatsu Ltd. Japan HORSEPOWER Gross: 143 kW 192 HP @ 2100 rpm Net: 142 kW 191 HP @ 2100 rpm BUCKET CAPACITY 2.7–4.0 m 3 3.5-5.2 yd 3 Photo may include optional equipment. Change Operating Tipping load Tipping load Width Ground in vertical
Is there silver Goop in a Komatsu strainer?
Btw Jplayer, there are that silver goop only nearby that suction filter and the quantity of it is about 2-3 tablespoons. Therefore L1ftmech has a good point… The part about the strainer being dirty, but not so dirty that it won’t let oil go through.
Why does oil not flow through a Komatsu strainer?
The part about the strainer being dirty, but not so dirty that it won’t let oil go through. That is not exactly saying the strainer is OK. That strainer has a very fine mesh and if you can see anything at all on the strainer, its capacity to flow volume has been reduced.
