Most popular

Why is my key not turning on my Chevy Silverado?

Why is my key not turning on my Chevy Silverado?

While there are a variety of reasons your Chevrolet Silverado 1500 key won’t turn, the most common 3 are a binding steering column/lock, an ignition switch issue, or a problem with the ignition key.

What to do if your ignition key won’t turn?

This feature is not available right now. Please try again later. Sometimes the ignition key won’t turn or rotate. If that happens the vehicle won’t start, the steering wheel won’t turn and it won’t shift into gear. On a late 90’s or early 2000 GM vehicle this is the way to get it apart so you can replace the tumbler. Loading…

Why is the steering wheel not turning on a 2002 Chevy Silverado?

On a 2002 Silverado 1500, all-of-a-sudden the key will not turn. but the steering wheel does move. The key is removable. 1. tap the key with a hammer; didn’t help.

What happens when the ignition lock cylinder fails?

When the ignition switch lock cylinder fails, it can create a situation where the ignition cannot be turned, or takes much wiggling and shaking before it finally turns. Or, it’s… Read More

While there are a variety of reasons your Chevrolet Silverado 1500 key won’t turn, the most common 3 are a binding steering column/lock, an ignition switch issue, or a problem with the ignition key.

On a 2002 Silverado 1500, all-of-a-sudden the key will not turn. but the steering wheel does move. The key is removable. 1. tap the key with a hammer; didn’t help.

What to do if your car key won’t turn?

Do NOT take an electronic chip key into the water surfing with you, hide it under the car, or buy a lock box like this one. If you do damage a chip key, or get it wet, regardless of how many jumper cables you hook up to the car it will never start. You will have to pay for a new key or pray that you have a spare chip key.

Why is my Silverado no crank no start?

I checked the start (8:30am ) before doing anything else and the engine cranked (slowly) but fired and ran on the first attempt. All dash display normal, the alternator charge at 14V and nothing out of the ordinary. I’m pretty sure something was iced up but I don’t get how any thaw took place with conditions here.

What happens when your key won’t turn in?

If your key won’t turn your ignition lock cylinder and the steps above did not get your ignition to turn, then there is an extremely good chance your vehicle is in the list below. The list below is just a partial list of vehicles we suspect of having ignition failure problems when people call and say “My key won’t turn in my ignition”.

What to do if your Silverado won’t shut off?

I have an “02” Silverado that won’t shut off with the key. The key works like normal but engine keeps running, Anybody have any ideas? Sounds like the ignition sw. to me. Any help will be appreciated, Thanks. Click to expand… To get it to shut off? Pull a main fuse from the underhood fuse panel.

If that doesn’t work there is a little cable that goes from the shifter mech to the ignition switch. This is what makes the key impossible to turn off while in gear. Undo the side on the ignition switch. Maybe that will help. If not, make sure you have the park brake frimly engaged, then get under the truck.

Why does my steering wheel not turn when I turn the key?

Turn the Steering Wheel The most common reason that a car key will not turn is that the steering wheel has locked. This will happen when the steering wheel has been moved after the key has been removed from the ignition cylinder. Turn the steering wheel to the right and left.

Why does my car not start when I put the key in?

Putting the key in the ignition switch and starting the car feels like second nature. However, if your car has ignition switch problems, you may not be able to start the car at all. Ignition switch problems can also cause issues on the road, such as unexpected shutdowns or electrical problems.

What should I do if my key won’t turn?

The ignition switch needs to have the small linkage from the back side of the key lock cylinder to turn the switch to start and run the vehicle. Have the ignition switch removed and inspect the linkage and switch to see if one or both switch and linkage needs replaced.

Turn the Steering Wheel The most common reason that a car key will not turn is that the steering wheel has locked. This will happen when the steering wheel has been moved after the key has been removed from the ignition cylinder. Turn the steering wheel to the right and left.

What happens if you don’t turn the ignition key?

Sometimes the ignition key won’t turn or rotate. If that happens the vehicle won’t start, the steering wheel won’t turn and it won’t shift into gear. On a late 90’s or early 2000 GM vehicle this is the way to get it apart so you can replace the tumbler.

What should I do if my Chevy Silverado wont start?

You should always have a suitable jumper cable in the trunk. With its help, the battery receives a current pulse from another vehicle that is sufficient to start the vehicle. The battery can then recover and recharge while the engine is running. Another option is to connect a battery charger.

When the ignition switch lock cylinder fails, it can create a situation where the ignition cannot be turned, or takes much wiggling and shaking before it finally turns. Or, it’s… Read More

On several occasions after vehicle is parked and shut off, ignition key is inserted to start vehicle and the key will not turn. Only known remedy is to pull hard on the steering wheel in a left or right rotation while turning key at same time to unlock an otherwise locked ignition/steering wheel.

Why does the steering wheel turn with the ignition key off?

If the steering wheel is turned with the ignition key in the off position, this may cause excessive pressure between the lock plate and lock pin. The next time the ignition key is rotated from the “Off” to the “On” position, it may be difficult or unable to be rotated.

How do you remove the key from a Chevy Silverado?

Time needed: 5 minutes. CLOSE all doors. INSERT key into the Ignition (DO NOT TURN). PRESS and HOLD the power UNLOCK button on the Driver’s side door. DO NOT release until instructed. (ON is the position just shy of cranking the engine and OFF is where you can remove your key).

How to program a Chevy Silverado key fob remote?

Free Key Fob Remote Programming Instructions for a 2002 Chevrolet Silverado (1500, 2500, 3500) 1 Close All Doors CLOSE all doors. 2 Enter Programming Mode – Step 1 INSERT key into the Ignition (DO NOT TURN). 3 Enter Programming Mode – Step 2 PRESS and HOLD the power UNLOCK button on the Driver’s side door.

How to lock and unlock a Chevy Silverado?

HOLD the LOCK and UNLOCK buttons on the remote at the same time, up to 30 seconds, until door locks cycle LOCK / UNLOCK to signal successful programming of the remote. REPEAT Step 6 for any additional remotes to be programmed, including working ones.

When do I need to replace my Chevy Silverado key?

1999, 2000, 2001, 2002, 2003, 2004, 2005 Chevrolet Silverado non-transponder key replacement (P1113/B102 (Plastic Cover)) Q: I lost my Chevrolet Silverado car keys, have no spare, and need a replacement. How and where can I get a replacement key?

Why does my Chevy Silverado want to turn over?

Truck wants to turn over but will act as if is starving for fuel,wait ten minutes, it start. Been happening frequently lately. I also was told it was the security system Will turn key and it is like no power from battery to starter, but have lights, radio, etc. Turn key again or sometimes multiple times, to no avail.

When do I need to replace my Chevy Silverado remote fob?

Click on the type of key you had or your year model below to get the most accurate information: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Chevrolet Silverado remote key fob replacement (M3N32337100) Already have a remote key fob?

Which is the turn key package for the LS1?

Turn-key LS Engine Packages. 1 TSP 347 CID 500 HP LS1 Turn-Key Package. $ 14,179.99. 2 TSP 347 CID 515 HP LS1 Turn-Key Package. 3 TSP 370 CID 520 HP LQ9 Turn-Key Package. 4 TSP 370 CID 570 HP LQ9 Turn-Key Package. 5 TSP 376 CID 556 HP LSA Turn-Key Package. More items

What kind of cars are at key Chevrolet?

Key Chevrolet offers the complete line-up of new Chevrolet vehicles . From the mighty Chevrolet Silverado to the versatile Chevrolet Equinox to the iconic Corvette and Camaro, you’ll find all of Chevrolet’s offerings at our location. No matter what your automotive needs are we’ll have the perfect vehicle for you.

Why is my Chevy Silverado 1500 not starting?

However, today, when the truck will crank and start, the antitheft icon goes off after a few seconds with the key on and stays off while the truck is running. It never flashed either today or yesterday though. And I don’t know if the antitheft system disables cranking or starting or both.

Can a Silverado run without the ignition switch?

Silverado stayed running without the key in the ignition switch Hopefully someone can help me out here? I have a 2008 silverado crew cab which i am recently having problems with.

Why does my Silverado start with a jump?

THANK YOU IN ADVANCE!!!! You need to load test battery to begin with. If it will start with a jump it is most likely the battery. Not sure I follow everything there but first if you jump it off then the solenoid has to be working. You could have a bad connection to the battery post itself or a bad or weak battery.

What causes a Chevy Silverado to not start?

There are really two main ways that a vehicle will not start. The first and most common is when it won’t turn over. This just means that the engine doesn’t move when you turn the key. The second way that your Silverado won’t start is when the engine turns when you engage the starter, but it won’t fire and run on its own.

Why is my ignition key not turning on?

This will allow the ignition key to rotate from the “Off” position. The ignition key may need to be rotated at the same time the steering wheel is being rotated.

What does it mean when your Chevy won’t start?

My Chevy won’t start sometimes. Only happen now and then. Everything comes on when you turn the key but when you click the key over to start the engine nothing happens. There doesn’t seem to be any certain time or day or reason for the problem.

Silverado stayed running without the key in the ignition switch Hopefully someone can help me out here? I have a 2008 silverado crew cab which i am recently having problems with.

Who is the owner of the 2005 Chevy Silverado?

2005 Chevrolet Silverado Owner ManualM GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, the CHEVROLET Emblem, and the name SILVERADO are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice.

How many miles does a 2005 Chevy Silverado have?

I drive a 2005 chevy silverado 5.3 4×4 crew cab with 200,000 miles on it. 93 people found this helpful. Omiizzyy. How long did you leave this Lucas oil product in for?

Why does my car not shift into third gear?

Such a problem is automatic transmission won’t shift into 3rd gear. The transmission shifts into the first and then to second gear but does not move into the third gear. It seems that the gear slips into neutral when you push it to the third. Another instance could be the automatic transmission won’t shift into 3rd gear at all.

How big is a 2005 Chevy Silverado Extended Cab?

Used 2005 Chevrolet Silverado 1500 Extended Cab LT Pickup 4D 6 1/2 ft Edit OptionsMileage: 161,687 4.6 Consumer Write a review View Gallery For Sale Near You 10 Chevrolet Silverado 1500 Extended Cab vehicles in your area. Used 2005 Chevrolet Silverado 1500 2WD Extended Cab $4,700 Private owner via Tred.com Used 2005

2005 Chevrolet Silverado Owner ManualM GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, the CHEVROLET Emblem, and the name SILVERADO are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice.

What should I do if my Chevy Silverado starts acting up?

Contact GM if a relatively new Silverado starts acting up. It could be that there is a TSB (technical service bulletin) or recall that addresses the problem. If so, give your dealer the TSB number and expect to get your repair made for free. Since 2007, the newly designed Silverado shares the same platform with the Chevy Tahoe and GMC Yukon.

When to troubleshoot the electrical system in a Chevy Silverado?

This happens sometimes when trailer wiring has been added, causing electrical system problems. Consider having the BCM or Body Control Module replaced if your Silverado repeatedly blows out the same fuses or if it seems like you’re experiencing one electrical problem after another.

What happens when you disconnect the battery on a Silverado?

If you do disconnect the battery for any extended period let the truck idle for a few minutes after reconnecting the battery. It gives everything time to relearn the things mentioned above. No worries. The only strange thing that I personally have experienced . When I replaced the battery on my silverado the air conditioning doesn’t work.

When to disconnect a battery from a truck?

In cases like routine maintenance such as replacing a alternator or starter where it requires the battery to be disconnected you should be fine. ^^^ everything Bud said. If you do disconnect the battery for any extended period let the truck idle for a few minutes after reconnecting the battery.

If you do disconnect the battery for any extended period let the truck idle for a few minutes after reconnecting the battery. It gives everything time to relearn the things mentioned above. No worries. The only strange thing that I personally have experienced . When I replaced the battery on my silverado the air conditioning doesn’t work.

What kind of battery does a Chevy Silverado have?

Installed new battery on 2010 chevy Silverado and it still won’t crank. Lights aren’t turning on and no noise when I turn the key. My car has 95000 miles. My car has an automatic transmission.

What are the problems with a 2003 Chevy Silverado?

The 2003 Chevrolet Silverado has 4 problems reported for engine won’t turn over,won’t start. Average failure mileage is 97,500 miles.

This feature is not available right now. Please try again later. Sometimes the ignition key won’t turn or rotate. If that happens the vehicle won’t start, the steering wheel won’t turn and it won’t shift into gear. On a late 90’s or early 2000 GM vehicle this is the way to get it apart so you can replace the tumbler. Loading…

The 2003 Chevrolet Silverado has 4 problems reported for engine won’t turn over,won’t start. Average failure mileage is 97,500 miles.

What to do if your Chevy Silverado won’t start?

No one has added a helpful site for this 2003 Silverado problem yet. Be the first! Read reviews of repair shops in your area. Enter your zip code: NewRockies.com: How to fully bypass VATS, PassKEY and PassLock systems in GM cars.

Why is my Silverado remote not turning on?

I pulled everything out and is still not working. The Security light in the message center flashes when the doors are open, but will turn off when the key is turned on and start right up. Maybe this is the issue??? Hoping someone has an idea what is going on here.

When does a Silverado 2500HD won’t start?

Ran like a champ from June to November.. The minute the cold rainy weather came, have now had 5 times the truck completely dead, no start, no click, no fuel pump, Nothing. Couple of times, turn the key, put the truck in drive, back in to park, turn the key off, turn the key back on, truck starts up.

How do I program my Chevy Silverado key fob?

The FCC ID# and GM# must match in order for your fob to operate your truck. Program your key fob per your owner’s manual. You must program each individual key fob for them to work. Standing next to your truck (on the driver’s side door), press the “lock” and “unlock” buttons on your key fob simultaneously.

Ran like a champ from June to November.. The minute the cold rainy weather came, have now had 5 times the truck completely dead, no start, no click, no fuel pump, Nothing. Couple of times, turn the key, put the truck in drive, back in to park, turn the key off, turn the key back on, truck starts up.

The FCC ID# and GM# must match in order for your fob to operate your truck. Program your key fob per your owner’s manual. You must program each individual key fob for them to work. Standing next to your truck (on the driver’s side door), press the “lock” and “unlock” buttons on your key fob simultaneously.

What are the key fobs on a Chevy?

Most late model Chevrolet vehicles come equipped with keyless entry remotes, also known as key fobs. Keyless entry is a method of controlling your door locks and trunk release without using your key in the doors. Each key fob for every Chevy must be programmed for its own particular vehicle.

How can I get my Chevy to lock and unlock itself?

Remove your hand from the “Unlock” button on the door panel. Your Chevy will then lock and unlock itself automatically. Hold the “Lock” and “Unlock” buttons simultaneously on your key fob until the doors of your Chevy automatically lock and unlock themselves one more time. Test your keyless entry remotes.

Is the Chevy Colorado Crew Cab too small?

I WOULDN’T BUY ANOTHER BECAUSE THE REAR SEATS (?) ARE TOO SMALL FOR ANYONE OVER THE AGE OF 6. THE ONLY OPTION IS THE CREW CAB WHICH HAS A (USELESS) 5 FT. BED. MY NEXT TRUCK WILL BE A SILVERADO WITH AN EXTENDED CAB.

How to reset PassLock reset system on Chevy?

1. Turn the key to ON and attempt to start the engine and release the key to the ON position. 2. The SECURITY light will illuminate. Wait 10 minutes until it turns off. 3. Turn the key to OFF for 10 seconds. 4. Turn the key to ON and attempt to start the engine.

How do you open the fuse box on a Chevy Silverado?

Remove the fuse box cover by lifting up the left side as you push the tabs out of their slots. Depending on the year Silverado you have and if the fuse box has never been opened, you may need to pry up the cover with a flat head screwdriver.

Why are the doors on my Chevy Tahoe not working?

Unfortunately, this does not fix my problem, I have a 2008 Chevy Tahoe, 3 of the four doors the dome lights come on, but the driver side rear passenger door does not. Where is the door switch for this? I am sure the sensor or push button switch for this door does not seem to be working.

Why does my GMC Sierra door not turn on?

It has been driving me nuts that when I would open the door on my GMC Sierra that the dome light would not turn on. It was simply the flat switch above the dome light knob left of the steering wheel. Like several others here, I had no idea it was a switch until I read this post.

What is the ignition lock cylinder on a Chevy Silverado?

The ignition lock cylinder for Chevy Silverado 1500 is a component within your vehicle’s ignition switch. The part ensures that only a specific key starts your vehicle. It’s possible for the tumblers within the lock cylinder to get worn out, so the part won’t be able to work even with your key.

How to reset the PassLock system on a 2000 Silverado?

If the Passlock system identifies the key as unauthorized, the engine stalls. Leave the ignition switch in the “Run” position as the “Security” light blinks on and off for approximately 10 minutes. Turn the ignition switch clockwise to start the engine immediately after the “Security” light stops flashing.

What to do if your car key does not go off?

Just open the door with the keys in the ignition, look under the dash on the driver or passenger side. using you good hearing locate the chime and simply disconnect the plug from the back. Key fobs do not lock/unlock doors, horn or trunk release.

The ignition lock cylinder for Chevy Silverado 1500 is a component within your vehicle’s ignition switch. The part ensures that only a specific key starts your vehicle. It’s possible for the tumblers within the lock cylinder to get worn out, so the part won’t be able to work even with your key.

Truck wants to turn over but will act as if is starving for fuel,wait ten minutes, it start. Been happening frequently lately. I also was told it was the security system Will turn key and it is like no power from battery to starter, but have lights, radio, etc. Turn key again or sometimes multiple times, to no avail.

Why do I have to turn the key several times before starting the car?

You either have a very clogged fuel filter, or are in need of a new fuel pump. Fuel pressure should be checked, and should be no lower than about 55psi while running or key on. By turning the key several times, you are priming the fuel system up enough to start the vehicle, so you definitely have a fuel issue.

Is it good to turn key and no start / crank?

Automotive Forums .com Car Chat > Chevrolet > Avalanche | C&K | Silverado | Suburban | Tahoe > Silverado > Turn key and no start/crank…bat is good! Turn key and no start/crank…bat is good! Hi guys, Thanks in advance for any help, I have a 01 2500HD Crew cab with the 6.0. Tonight I stopped at the gas station to grab some milk.

You either have a very clogged fuel filter, or are in need of a new fuel pump. Fuel pressure should be checked, and should be no lower than about 55psi while running or key on. By turning the key several times, you are priming the fuel system up enough to start the vehicle, so you definitely have a fuel issue.

What’s the difference between turn key and no crank?

Returned in the morn, 1st time held key and no luck, 2nd time (1/2 hour later) while waiting for tow, held key in start and she starts right up. She’s been starting just fine for a week now, haven’t dug into her yet as this is my plow truck and we’ve been getting snow and don’t want to get caught with my pants down when it’s time to go.

There are really two main ways that a vehicle will not start. The first and most common is when it won’t turn over. This just means that the engine doesn’t move when you turn the key. The second way that your Silverado won’t start is when the engine turns when you engage the starter, but it won’t fire and run on its own.

How to turn off starter on Chevy Silverado?

1 Turn OFF the ignition. 2 Disconnect the PCM harness connector. 3 Connect a DMM between the starter enable relay control circuit of the PCM harness and a good ground. 4 Turn the ignition to the START position.

How to get a Chevy Silverado to crank over?

1 Turn OFF the ignition. 2 Disconnect the power train control module (PCM) harness connector. 3 Connect a test lamp between the Crank Voltage circuit of the PCM harness and a good ground. 4 With the transmission in park, or clutch pedal pressed, turn the ignition switch to the START position.

If that doesn’t work there is a little cable that goes from the shifter mech to the ignition switch. This is what makes the key impossible to turn off while in gear. Undo the side on the ignition switch. Maybe that will help. If not, make sure you have the park brake frimly engaged, then get under the truck.

What to do when your GMC Truck won’t start?

Try turning your key to the run position a few times (with out starting). Then try to start it. If it starts, sounds like what mine did. I replaced the fuel pump assembly and that fixed the problems. Very common problem.

What happens when you turn the key on a car?

The higher rate of electricity gives the starter motor more “oomph” to turn the engine over. The process of starting the car begins at the ignition switch in the driver’s cockpit. The key turn completes a small circuit that tells the battery to release power to the starter solenoid.

How does a key turn work on a starter motor?

The key turn completes a small circuit that tells the battery to release power to the starter solenoid. The solenoid ramps up the power given to it and that power causes the starter motor to turn very quickly.

The higher rate of electricity gives the starter motor more “oomph” to turn the engine over. The process of starting the car begins at the ignition switch in the driver’s cockpit. The key turn completes a small circuit that tells the battery to release power to the starter solenoid.

If your key won’t turn your ignition lock cylinder and the steps above did not get your ignition to turn, then there is an extremely good chance your vehicle is in the list below. The list below is just a partial list of vehicles we suspect of having ignition failure problems when people call and say “My key won’t turn in my ignition”.

What happens when the ignition switch fails in a car?

When the electrical portion of the ignition switch fails, the vehicle will permanently or intermittently lose power to certain systems and components, depending on which positio… Read More

How does the ignition work on a Chevy Silverado?

Once the key is fully inserted, the ignition switch can be moved from the “off” to the “on” or “run” position. Silverados equipped with automatic transmissions have a shift interlock device that keeps your key in the locked position until the transmission is placed into park.

On several occasions after vehicle is parked and shut off, ignition key is inserted to start vehicle and the key will not turn. Only known remedy is to pull hard on the steering wheel in a left or right rotation while turning key at same time to unlock an otherwise locked ignition/steering wheel.

Why does my Chevy Silverado truck not start?

The starting problems of a vehicle can be different. In some cases the truck starts at least sporadically and allows its owner to drive independently to the nearest specialist workshop. In other cases, the truck won’t start until the underlying problem is solved. The nature of the starting problems depends on their cause.

Where is the ignition key on a 1997 GMC?

Place your multimeter in Ohms mode. Place the ignition key in the ACC position. You should have continuity between terminals D2 and D6 of the ignition switch connector. Place the ignition key in the OFF position. You should have continuity between terminals C1 and D5 of the ignition switch connector. Place the ignition key in the RUN position .

Is there a problem with the ignition switch on a Chevy truck?

The Chevrolet truck ignition switch problem on the older vehicles carries a unique set of symptoms. Drivers of these trucks and sport utility vehicles sometimes complain about how the key operates. The spring-loaded return function of the ignition key is built into the switch itself.

Is the 1997 GM ignition switch a defective part?

The 1997 GM ignition switch is an expensive part. So if your diagnostic test results indicate you’ve got a defective one on your hands, check out the following links. I think they’ll help you comparison shop for it and save a few bucks: NOTE: Not sure if the above ignition switch fits your particular 1997 Chevy or GMC pick up or SUV? Don’t worry.

Author Image
Ruth Doyle