Why is my door lock not working on my 2002 Explorer?

The central security module controls the door loks, and if using the keypad doesnt work, as it is wired directly to the module, that may be the problem, or possibly a blown fuse. This is the visual inspection list. helpful?

Where are the relays on a Ford Explorer?

They wont work with the fob or the combination pad outside the door either.I need to know where the door lock relays are located and would love to have a door lock wiring diagram.I already removed the drivers door panel and the rubber wire duct in the door jamb and found a red wire broken and tada!

How do you unlock a Ford Explorer power door?

Turn the ignition key to ON. 2. Press the power door unlock control three times. 3. Turn the ignition key from ON to OFF. 4. Press the power door unlock control three times. 5. Turn the ignition back to ON. The horn will chirp. 6. Press the unlock control, then press the lock control. The horn will

What to do if power lock switch fails to work?

If the remote (s) fails to work after replacing the battery they’ll need to be synchronized (so to say) to the vehicle’s PCM in order to unlock the doors. The dealer is about the only place that can scan for the proper frequency to allow the remote to function.

How do you disable the auto lock mechanism on a Ford EXPL?

The following steps are how to disable the auto lock feature in your vehicle. Confirm that the vehicle alarm is disarmed. Close all the doors. Make sure that the ignition switch is in the ’OFF’ position. Turn the ignition switch from ’OFF’ to ’RUN’. Press the power door lock ’UNLOCK’ button three times.

What are the problems with a 2002 Ford Explorer?

The Explorer has an enclosed transmission which is typically replaced with a rebuilt transmission at a cost of almost $3,000. Another common problem for the 2002-2003 Explorer is wheel bearing failure at around 90k miles, with a typical repair bill of $500 to $1000 depending on how many wheel bearings failed.

Is there a way to lock down Internet Explorer?

Even with its incompatibilities and nuances, Internet Explorer is highly manageable. Group Policy Objects provide a relatively simple (and free) means to lock down what is arguably your most vulnerable piece of business software.

How to replace Ford Pats control function type E keys?

Start vehicle. Replacing PCM only — E type PATS If only the PCM is being replaced on a PATS control function type E vehicle, two keys need to be programmed into the PCM. This requires a scan tool with capability to program PATS type E keys, or a CARDONE Flash2 All-Makes Reprogrammer with Ford license and subscription to www.motorcraftservice.com.

What are the settings for Internet Explorer 11?

There are actually two settings: one for the Internet and Restricted zones, and one for the Intranet, Trusted and Local Machine zones. If enabled, IE 11 won’t check with antimalware software to see if it’s safe to create an instance of the ActiveX control in question.

What’s the problem with my 2002 Ford Explorer?

My 2002 ford explorer won’t start I changed my starterd and my battery and my alternater it still won’t start now my 2002 ford explorer won’t cut off when I turn the key ignition switch off what the problem please help me out 10 people found this helpful. Roll driver window down, get out lock door with key, remove key.

What to do if your Ford Explorer is stolen?

Take off the top cover of the steering wheel or theres a little square cover you can pop open with a screw driver. Put the screw driver in the opening and push down on this piece that is spring loaded and pull down on your shifter. Put your car back in Park and start your car! Hope this helps you guys! 10 people found this helpful.

Why is my door lock not working on my 2002 Explorer?